EG GL + fitting rear swaybar help

[incoming]

ok so i went to fit a VTi sway onto the EG sedan... but theres no holes on the LCA to bolt the end links...?

is there a difference on the LCAs for GL's/Si VTi's?

[Paul1985]

If your EG came without a swaybar stock then it wont have the swaybar holes in the LCA. U will need to get the appropriate ones. Im pretty sure EG6/DC2 are the LCA's you need.. They are exactly the same.

[[[d a n n y]]]

GL has no rear sway bar and no holes on the LCA
Paul EG6/DC2 can do the job but then he'll have to change the rear suspension. to the EG6/DC2 1
Ross best way is to get Si/Vti LCA and use em..
they are the only EG LCA's that have holes on em...
Might as well change the rear brakes to Disc while your at it ross lol

[incoming]

oh man... i didnt wana spend to much on the runaround
son of a..!

thanks for the info Danny!

edit: if i do upgrade to discs.. would i need to upgrade the master cylinder?

[[[d a n n y]]]

oh man... i didnt wana spend to much on the runaround
son of a..!

thanks for the info Danny!

edit: if i do upgrade to discs.. would i need to upgrade the master cylinder?

your standard master cyliner will be sufficient for the time being.
but if u upgrade to bigger front brakes that's when u need the master cylinder

[Boban]

ahh crap on a crap stick, i'm about to buy a eg8 for running around, but if it's gonna be that hard to fit my old vti parts, kinda puts me off

[Paul1985]

];1035408']GL has no rear sway bar and no holes on the LCA
Paul EG6/DC2 can do the job but then he'll have to change the rear suspension. to the EG6/DC2 1
Ross best way is to get Si/Vti LCA and use em..
they are the only EG LCA's that have holes on em...
Might as well change the rear brakes to Disc while your at it ross lol

True. Didn't think about the suspension.