View Full Version : GS-R B18C1 - VTi-R B18C2
Wazza
12-06-2004, 06:40 PM
Can anyone tell me if there is any difference between the American B18C1 and the Australian B18C2
Can anyone tell me if there is any difference between the American B18C1 and the Australian B18C2
Bugger all - RHD - LHD 8)
McChook
12-06-2004, 07:48 PM
To the best of my knowledge, the 2 engines are pretty much the same
joneblaze
13-06-2004, 12:30 AM
Wazza, you might want to research www.team-integra.net and www.honda-tech.com as to HP figures for the stock USDM B18C. Compare them to AUSDM figures and that should answer your question (let us know btw :)) .
Also:
The two shit stirring idiots will be dealt with ASAP. As for the rest of us, please keep this on topic... and do OH a favour; DON'T TAKE THE BAIT. If you ignore them and let the mods clean up the problem, they'll simply move on to another forum to play their games.
Jon
ginganggooly
13-06-2004, 05:37 AM
anyway. honda oz quoted the vti-r as 125kw (168hp), they rate the gs-r as 170hp (127kw).
but, who knows how accurate those firgures are though. it's not really a significant figure, in fact i'd be inclined to think that the variation in power output between two of the same model cars from the same domestic market would have a variation in power of around that magnitude (2 or so kw)... *arsetalk disclaimer.
vti-2
13-06-2004, 04:52 PM
Posts made by the now banned users have been deleted. I have also deleted other unnecessary posts made by Ozhonda members and others have been edited.
In future, if useless posts are made they will be deleted. Please only post if you are going to add useful accurate information in relation to the topic.
thanks.
Wazza
13-06-2004, 05:47 PM
Ok I have found some specs but am still at a loss...
VTi-R (B18C2) (Specs taken from Honda Specification Brochure 1993)
Displacement (cc) = 1797
Bore & Stroke (mm) = 81 x 87.2
Compression Ratio = 10.0:1
Max Power (kW/HP) = 125/170 @ 7300rpm
Max Torque (Nm/kgm) = 173/17.6 @ 6200rpm
GS-R (B18C1) (Specs taken from www.carpoint.com)
Displacement (cc) = 1781
Bore & Stroke (in) = 3.19 X 3.43 (Converted to mm = 81 x 87.1)
Compression Ratio = 10.0:1
Max Power (HP) = 170 @ 7600 RPM
Max Torque (lb-ft) = 128 @ 6200 RPM (Converted to Nm = 173)
So there are very slight differences, maybe the difference in the engines is because of LHD/RHD setup I will keep on looking.
ECU-MAN
13-06-2004, 05:57 PM
the difference could be fuel
fly_vti
18-04-2005, 05:56 PM
http://www.dohc-vtec.com.au/pages/specs.htm
THAT PAGE HAS ALL THE SPECS U NEED FOR 95% OF HONDA ENGINES.
tegstar83
18-04-2005, 10:08 PM
American fuel has less octaine
HondaLva
19-04-2005, 09:37 PM
Also if you look at the photos of a Acura GSR (Honda Integra VTi-R) the brake and clutch resevoir's are on the opposite obviouly cause they are left hand drive...this also means that the battery is on the opposite side...etc etc
NSPYRE
11-05-2008, 10:14 PM
sorry to revive such a dead post..
so just to be clear, if i want to buy parts for my VTi-R from the US, i'd have to look for parts that suit the integra GSR?
Tu88y
11-05-2008, 10:24 PM
Yes that is correct its known as the GSR in America
yourfather
13-05-2008, 11:40 PM
Wazza, you might want to research www.team-integra.net (http://www.team-integra.net) and www.honda-tech.com (http://www.honda-tech.com) as to HP figures for the stock USDM B18C. Compare them to AUSDM figures and that should answer your question (let us know btw :)) .
Also:
The two shit stirring idiots will be dealt with ASAP. As for the rest of us, please keep this on topic... and do OH a favour; DON'T TAKE THE BAIT. If you ignore them and let the mods clean up the problem, they'll simply move on to another forum to play their games.
Jon
what,you going to cyber bash them to death.
how do you intend on dealing with them
NSPYRE
14-05-2008, 12:18 AM
^^^ umm... didnt that happen like 4 years ago? lol!
yourfather
14-05-2008, 12:21 AM
stfu 2006.
NSPYRE
14-05-2008, 12:28 AM
isnt that post 2004? 13th of June
yourfather
14-05-2008, 09:49 PM
no, you're a 2006
blk_shadow
14-05-2008, 10:11 PM
sorry to revive such a dead post..
so just to be clear, if i want to buy parts for my VTi-R from the US, i'd have to look for parts that suit the integra GSR?
that's correct, cos in US, they only list it as a GSR.
miraitru
19-02-2011, 05:16 PM
uhh, so if I were to buy a Injen CAI from the US for the GSR version, would it fit for my VTI-R? or would the intake be in diff diameter?
Photonic_Si
22-02-2011, 06:44 AM
Why would it be different diameter? Holy zombie thread batman!!
Vvvtec
22-02-2011, 10:16 AM
uhh, so if I were to buy a Injen CAI from the US for the GSR version, would it fit for my VTI-R? or would the intake be in diff diameter?
I have one on my car. Fits like a glove.
Mikecivic78
25-02-2011, 10:52 PM
B18C1 info here : http://en.wikipedia.org/wiki/Honda_B_engine
skeptic_
25-09-2012, 10:10 PM
making it clear,
Will these 3 GSR(USDM) parts fit my VTIR:
1. Short Ram Intake
2. Full Exhaust Catback (JDM)
3. 4-1 Headers (JDM)
Are these even affected by the RHD and LHD?
Cheers
Vvvtec
25-09-2012, 10:23 PM
ALL parts WILL fit. 110% sure.
VTec1987
25-09-2012, 10:55 PM
sorry to revive such a dead post..
so just to be clear, if i want to buy parts for my VTi-R from the US, i'd have to look for parts that suit the integra GSR?
Yes......
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.