PDA

View Full Version : Will these fit a Dc2r



Jomsy
24-01-2007, 02:12 PM
16x6.5 +40

Will this size rim fit a dc2r with no clearance issues

Astro
24-01-2007, 03:55 PM
i prob fit jomsy...not 100% sure.

i had 16x7 +42 and it fit nicely

teaseR
24-01-2007, 05:39 PM
i was told that 16x7 +38 would sit nice under the guards

b20b
24-01-2007, 06:34 PM
If i can remember correct ( I'm getting old )
On a front wheel drive car you should not change the offset of your wheels from standard
I think the offset for honda integra is 45 ( please correct if wrong)

....its illegal for starters .(that doesnt stop some of us)
....it also affects the handling in a bad way:thumbdwn:

teaseR
24-01-2007, 08:32 PM
^^^
but because original wheels are 5.5" wide thats why the offset is 45
now hes goin from 5.5" to a 6" wide the offset needs to be lower or else the wheels ill pump out of the guards

b20b
25-01-2007, 05:26 AM
^^^
but because original wheels are 5.5" wide thats why the offset is 45
now hes goin from 5.5" to a 6" wide the offset needs to be lower or else the wheels ill pump out of the guards

its possible to run up to 7 inch wide rim with 215 tyre with 45 offset and no rubbing ....no need to change the offset

DLO01
25-01-2007, 06:34 AM
16x6.5 +40

Will this size rim fit a dc2r with no clearance issues

What wheels are they? The wheels will clear the extremitys no problems. But you also need to make sure they clear you calipers. Best bet is to fit them and make sure they clear.


i was told that 16x7 +38 would sit nice under the guards

Maybe, but thats pushing it I think. I have 16x7, +40, 205 tyres on my DC2R. Front is no problems, but my rear tyres are extreemly close to the lip of the guards, no rubbing at all.


its possible to run up to 7 inch wide rim with 215 tyre with 45 offset and no rubbing

Yes, agreed. :thumbsup:

edw-R
26-01-2007, 10:39 PM
Good answer DL001. It should fit without clearence problem.

Jomsy
28-01-2007, 09:49 AM
They are the stock wheels off a r33 gts-t, less that $100 for 4 with tyres

guard-rail
01-02-2007, 05:40 AM
^^^
but because original wheels are 5.5" wide thats why the offset is 45
now hes goin from 5.5" to a 6" wide the offset needs to be lower or else the wheels ill pump out of the guards

dude...you are aware that lower offset increases the track right? so if you really want to maintain the same track as before but use a wider wheel then the offset has to increase.

5.5" wide +45mm offset = 6" wide +51mm offset

faijai
01-02-2007, 11:50 AM
they will fit jomsy
i have 16x7 +38 and they fit fine