PDA

View Full Version : matallic screeching noise when clutching



deceived
26-01-2007, 12:12 AM
hey i have a integra LS and whenever i clutch in, theres a screeching noise.
how do i fix it? can i just spray some WD40 on the clutch?

aaronng
26-01-2007, 12:20 AM
When your engine is off, does it still screech when you clutch in?

deceived
26-01-2007, 01:27 AM
Yea it does...

i think its just the clutch pedal thats making the noise... but how do i fix it?

aaronng
26-01-2007, 09:55 AM
Could be a lube problem with the clutch pedal assembly. Lube up the pivot points with spray on grease (not WD-40). See if this works.

dsp26
30-01-2007, 07:19 PM
are LS integra cable or hydraulic?

if its cable then you may also have damage on the firewall.

green_machine
11-02-2007, 08:10 PM
lol..dont spray wd40 or ur clutch will slip and u'll end up burning ur clutch...
is ur clutch hydraulic or cable?if cable then u might need a new 1..if its hydraulic and it still happens wen engine is off then ur release bearing is dry, wen u press then clutch it will slide along the inputshaft causing the screecching noise ause theres no lubrication..fixing it is gearbox out and lubricating the shaft and bearing.