Honda Integra Model Listing

[XXpl0Sive]

NOTE: The specifications listed below are only estimates and to be used to gain a rough idea. OzHonda in no way guarantees their accuracy and is not responsible for any errors that may have been posted.

DC5 Integra Type R
Release: 2001-2004
Engine: K20A2 2.0L DOHC i-VTEC, 147kW@7400RPM, 192Nm@6000RPM
Specific: CR 11:1, Redline@7900RPM, Cutout@8200RPM
Drivetrain: 6 Speed close ratio, 4.764 FD, Helical LSD (same as JDM)
Weight: 1160Kg (without Air Conditioning - Optional)
Brakes(F/R): Ventilated discs 300mm, sold discs 260mm rear, large single piston calipers/Discs, ABS
Suspension(F/R): Macpherson Strut/Double Wishbone.
Handling: Rear sway bar (19 mm), front sway bar (23 mm), front upper strut brace
Standard features: 2 Airbags, power windows/steering/mirrors, Recaro buckets seats, Momo leather steering wheel, aluminium shifter
Additional: Bridegstone RE030 205/55/16, Enkei alloy wheels (16x6.5), JDM bodykit/chassis

DC5 Integra Type S
Release: 2005-2006
Engine: K20Z1 2.0L DOHC i-VTEC, 154kW@7800RPM, 194Nm@7000RPM
Specific: CR 11:1, redline@8100, Cutout@8600RPM
Drivetrain: 6 Speed close ratio, 4.764 FD
Weight: 1230kg (including Air Conditioning - Std)
Brakes(F/R): Ventilated discs 300mm, sold discs 260mm rear, large single piston calipers/Discs, ABS
Suspension(F/R): Macpherson Strut/Double Wishbone.
Handling: Rear sway bar (xx mm), front sway bar (xx mm), front upper strut brace
Standard features: 4 Airbags, power windows/steering/mirrors, leather seats, sunroof, 6 stack mp3 cd player
Additional: Bridgestone RE050 215/45/17, Enkei alloy wheels (17x7), same kit as JDM DC5S, also same as JDM DC5R minus rear wing. DC5S has upgrades to suspension geometry, stiffer sway bars both front and rear, thicker rear cross member, rear strut brackets have 3 extra connecting points on each side, revised front strut/chassic brace is bigger and stuffer, cams similar to JDM DC5R, stronger crank, revised spring and damper rates, additional engine bay reinforcing, quicker ratio for steering, larger brake master cylinder, larger diameter exhaust, lower NVH due to more sound deadening.

DC5 Integra Coupe
Released: Late 2001 -
Engine: K20A3: 2.0L DOHC i-VTEC, 118kW@6500RPM
Torque: 191Nm@4000RPM
Weight: 1,160kg

DC4 Integra GSi
Released: Late 1993-2001
Engine: B18B2: 1.8L DOHC, 107kW@6300RPM
Torque: 172Nm @ 5200RPM
Weight: 1146kg

DC2 Integra VTi-R
Released: Late 1993-1999
Engine: B18C: 1.8L DOHC VTEC, 127kW@7,300RPM, Cutout 8,200RPM
Torque: 173Nm@6,200RPM
Weight: 1,176kg
Drivetrain: 5 speed
Brakes(F/R): Ventilated Front Disks xx mm / Solid discs, ABS
Suspension(F/R): Double wishbone/Double wishbone
Handling: Rear sway bar (14mm), front sway bar (24mm), front upper strut brace
Standard features: Airbags, power windows/steering/mirrors,
Additional Info: VTEC engagement@4,400RPM, Secondary Intake butterflies open @5,800 RPM.

DC2 Integra Type R
Released:
Engine: B18C7 1.8L DOHC VTEC, 141kW@7,900RPM
Specific: CR 11:1, Cutout@8,500RPM
Drivetrain: 5 speed close ratio, Limited Slip Differential (LSD)
Weight: 1,087Kg (with A/C)
Brakes(F/R): Ventilated Disks xx mm / discs, ABS
Suspension(F/R): Double wishbone/Double wishbone
Handling: Rear sway bar (22mm), front sway bar (24mm), front upper strut brace, rear tower brace (optional)
Standard features: Airbags, power windows/steering/mirrors, Recaro buckets seats, Momo leather steering wheel, titanium shifter
Additional Info: VTEC engagement@5700rpm, Detailed info 1 (http://www.ozhonda.com/forums/viewtopic.php?p=3162#3162)

DA9 Integra
Released:
Engine: B18A1 DOHC 1834cc 96kW @ 6000rpm
Specific: CR 9.2:1
Torque: 170Nm @ 5000-5000rpm
Weight: Kerb Weight 1147 Kg
Drivetrain: 5 speed
Wheels: 14 x 5.5
Brakes(F/R):
Suspension(F/R):
Handling:
Standard features:
Additional Info:

Integra SX16
Released: 1986-1989
Engine: D16A3: 1.6L DOHC, 90kW@6500RPM
Torque: 142Nm@5500RPM
Weight: 1,020kg

[Dxs]

aint the gsi's sohc?

and do u want any info on previous tegs..
even like JDM tegs?

[wynode]

The GSi is DOHC

The focus is more on aussie specs, but if you have JDM stuff I'll put it up.

[Jnr Teggy]

hey fellas..


what about the 1st gen teg..

1986-89..

old school teg style!

[INFLYT]

So the DC2 R & the DC2 VTI-R are less than 100 kilogram's in weight difference........

[Tofu]

the current model Integra coupe is also called the Integra iS
or the base Integra...

[vti-2]

INFLYT - that sounds about right. The R shed some weight with the sunroof becoming optional, less sound deadening and various other things that became options...

[DJIntegr8]

old school specs :)

Integra SX16
Released: 1/5/1986 - 1/5/1989
Engine: D16A3: 1.6L DOHC - 90kW @ 6500 RPM
Torque: 142 Nm @ 5500 RPM
Weight: 1020 kg

[wynode]

Thanks.

Updated first post.

[ginganggooly]

the weight difference between the dc2r and vti-r is meant to be 27kg. some spec sheets i've seen have the vti-r down as 1120kg, some say less and some say more...
i dunno what the correct answer is.


i do know that vti-r's were rated as 125kw in oz trim, from the factory ;)


...forgot to mention, the 93-95 integras have a bit less weight than 96- models.

[EG_2_TEG]

the 94-97 GSi doesn't come standard with any airbags

any chance of puttin up info of the '89-'93 LS?

[Redteg]

EG_2_TEG: I have all the specs of the Generation 2's, both 89-91, as well as 92(-93?). I can post them up for you guys soon.

Also have some pretty pics of all variants (JDM versions) lined up; I'm sure it has already been passed around the board though.

[Civic Si]

Do Vti-Rs come in Auto?

[Dragohn80]

nope. it's manual only. it was kinda the performance model until the type r came along in, what was it, 98 or 99?

[eknine]

Do Vti-Rs come in Auto?
not sure if you are talking abt the integra or the civic but the civic vti-r do comes in auto, i know someone who has a mate who used to own one.

silver and only in sydney and its import(maybe from NZ not sure). who is the current owner not sure, year made i reckon its a 96 if not a early 97.

that the only that i know:)

[Civic Si]

Do Vti-Rs come in Auto?
not sure if you are talking abt the integra or the civic

Yeah, it's da Integra Vti-R... :lol:

I thought it would come only in manual, just checking! :wink:

[JustDC5R]

I know that the Civic Coupe VTi-R only comes in Manual, i used to own a silver one a few months ago before my DC5R. There are a few thought i believe that are in Auto maybe conversions... :?

Its a sweeeeet car

[Spunkymonkey]

VTIR tegs only came in manual

[eknine]

I know that the Civic Coupe VTi-R only comes in Manual, i used to own a silver one a few months ago before my DC5R. There are a few thought i believe that are in Auto maybe conversions... :?

Its a sweeeeet car

used to know of one civic vtir in auto, imported though not converted:)

[b16a_integra]

what about the da9 and da6 series info.....

[Marz]

Do Vti-Rs come in Auto?
not sure if you are talking abt the integra or the civic but the civic vti-r do comes in auto, i know someone who has a mate who used to own one.

silver and only in sydney and its import(maybe from NZ not sure). who is the current owner not sure, year made i reckon its a 96 if not a early 97.

that the only that i know:)Nah I believe the DC2 offered Auto in GSi only.
DC2 VTi-R was only manual, hence more of a "racer" image.

[vti-2]

Nah I believe the DC2 offered Auto in GSi only.
DC2 VTi-R was only manual, hence more of a "racer" image.

Correcto...

By the way guys, i just wanted to know something about the older Tegs. I've got a DC2 and was wondering what engine's come in the model previous to mine. I'm not sure what that shape is reffered to as.

Anyone know what their designated code is (as in '94 is DC2) and what engines that shape came with?

[joneblaze]

Wasn't the previous model Teg the LS Integra? I think it had the B18B1 motor... the DC2 GSi's have the B18B2?
i'm not sure, ask Manuel (RedTeg) for more info, he's got an LS....

[Spunkymonkey]

Nah I believe the DC2 offered Auto in GSi only.
DC2 VTi-R was only manual, hence more of a "racer" image.

Correcto...

By the way guys, i just wanted to know something about the older Tegs. I've got a DC2 and was wondering what engine's come in the model previous to mine. I'm not sure what that shape is reffered to as.

Anyone know what their designated code is (as in '94 is DC2) and what engines that shape came with?

Designated code for LS is DA. In Australia they came with the B18a.

In other countries you could get them with the b16a (xsi badged) or also ZC motors.

[Chronos]

The yanks also had a choice of a B17A. A DOHC VTEC block.

The second gen or "LS" Integra ran from 89-93, producing 130HP.

[tailz]

The second gen or "LS" Integra ran from 89-93, producing 130HP.

i believe only the 89-90 model produced 130hp and the 91-93 upgrade produced 140hp with stronger internals ...

[mooshie]

89 to 91 tegs ran the b18a, at 130hp (96kw) the 92-93 had 140hp this is for the Aust spec cars difference bettween the two was only in the manifolds and ECU. In America they also had the GSR which ran a b17a, Basically just a stroked b16. in japan they also had the b16a, zc, and possibly also a d series single cammer. In Australia we only got the DA9 or LS model which came with all options including A/C and sunroof but ABS only on the updated 92-93 spec. (optional only?) the update model also had different steering wheel and front and rear bumpers. Also if anyone knows who owns the grey 4 door in Adelaide i would love to see your car close up and where is it from? 4 doors were never sold in Australia. oh yeah, the Aus spec 2nd gen teg weighed 1122kg. :)

[wynode]

Hows about some info on the LS? (redteg?)

[toE]

Hows about some info on the LS? (redteg?)

Still waiting! :)

[b16a_integra]

found some info on the LS from carsales.com.au

Quick Info HONDA INTEGRA LS

Price $32,990 (back in 90-93)
Body 2 door Liftback
Transmission 5 speed Manual
Fuel Type Petrol
Release Date 1992
Segment Sports
Introduction HONDA INTEGRA

Country of origin Japan


Introduction
...
Dimensions HONDA INTEGRA

Length (mm) 4390


Width (mm) 1710


Height (mm) 1325


Wheelbase (mm) 2550


Track - front (mm) 1475


Track - rear (mm) 1475


Weights & Capacities HONDA INTEGRA

Kerb mass (kg) 1122


Body HONDA INTEGRA

VIN sample JHMDA93500S12346


Engine HONDA INTEGRA

Engine code B18A1


Engine location Front


Engine orientation Transverse


Engine description Four cylinders, in-line, belt-driven DOHC, four valves per cylinder, cross-flow head.
Capacity (cm3) 1834


Fuel system type PFI


Maximum power 103kW @ 6300rpm


Maximum torque 170Nm @ 5000rpm


Cylinders 4cyl


Valve train DOHC


Valves per cylinder 4v


Compression ratio 9.2:1


City 8.5


Highway 7.2


Drivetrain HONDA INTEGRA

Final drive location Front


Transmission description Five speed manual


Final drive ratio 4.26:1


Tyres & Rims HONDA INTEGRA

Front tyre description 195/60 R14 85H


Front rim description 5.5JJx14


Rim material Alloy


Warranty / Service HONDA INTEGRA

Warranty - description 3 yr, 80,000 km. 6 yr on corrosion
Major service interval (km) 10,000 km or 6 months.

[b16a_integra]

and the link:

http://www.carsales.com.au/pls/carsales/!cs_content.research_specs?vehicle_code=19931116.0 9:05:26&sort_type=&current_rec=5&make_name=HONDA&m odel_name=INTEGRA&year_min=1990&year_max=1993

[enoch]

um
i have a friend who's civic EG vtir was in automatic...

[wynode]

um
i have a friend who's civic EG vtir was in automatic...Take a pic of the car + engine bay + auto shifter and I will belive you :)

[gelo]

he meant a eg vti

[wynode]

he meant a eg vtiThen he should say so :)

[integrity]

wheres the rating for the integra ls ???
hehehehehe

[aznsiko]

hey man i need some info on the 91 model inetgras...engine specs and so on..

[toE]

hey man i need some info on the 91 model inetgras...engine specs and so on..


found some info on the LS from carsales.com.au

Quick Info HONDA INTEGRA LS

Price $32,990 (back in 90-93)
Body 2 door Liftback
Transmission 5 speed Manual
Fuel Type Petrol
Release Date 1992
Segment Sports
Introduction HONDA INTEGRA

Country of origin Japan


Introduction
...
Dimensions HONDA INTEGRA

Length (mm) 4390


Width (mm) 1710


Height (mm) 1325


Wheelbase (mm) 2550


Track - front (mm) 1475


Track - rear (mm) 1475


Weights & Capacities HONDA INTEGRA

Kerb mass (kg) 1122


Body HONDA INTEGRA

VIN sample JHMDA93500S12346


Engine HONDA INTEGRA

Engine code B18A1


Engine location Front


Engine orientation Transverse


Engine description Four cylinders, in-line, belt-driven DOHC, four valves per cylinder, cross-flow head.
Capacity (cm3) 1834


Fuel system type PFI


Maximum power 103kW @ 6300rpm


Maximum torque 170Nm @ 5000rpm


Cylinders 4cyl


Valve train DOHC


Valves per cylinder 4v


Compression ratio 9.2:1


City 8.5


Highway 7.2


Drivetrain HONDA INTEGRA

Final drive location Front


Transmission description Five speed manual


Final drive ratio 4.26:1


Tyres & Rims HONDA INTEGRA

Front tyre description 195/60 R14 85H


Front rim description 5.5JJx14


Rim material Alloy


Warranty / Service HONDA INTEGRA

Warranty - description 3 yr, 80,000 km. 6 yr on corrosion
Major service interval (km) 10,000 km or 6 months.

:rolleyes:

[integrity]

where is the LS integra specs ?

[jkz]

does anyone have the specs of an Integra Type S? and how it compares to a Type R?

[toE]

Just rock up to a dealer and grab a brochure mate. ;)

[InSaNe]

if any1 has any specs abut the 2001 JDM DC2R Integra type R can u plz post them coz iv just brought a car and id like to know whats goin on :P
tnx

[Marz]

Can anyone post up the full specs on the DC5 Integra Type S.
They have dropped the LSD from the R range too..

[JDM.Power]

All information found on autoweb.com

http://i4.photobucket.com/albums/y126/MRb18c/E5705Alo.jpg

Honda Integra Type - S

Body: 2 Door Coupe
Transmission: 6 Speed Manual
Engine Size: 2.0L
Engine Type: Multi Point F/INJ
List Price: $42,990
Engine Specifications
Cylinders: 4
Valve Gear: V-Dohc
Engine cc: 1998
Bore/Stroke: 86x86
Compression Ratio: 9.8
Power kW: 154
Torque Nm: 194

Dimensions
Seats: 4
Height (mm): 1400
Wheel Base (mm): 2570
Kerb Weight (kg): 1160
Steering
Steering: PaR&P
Turning Circle (metres): 11.6

Capacity
Fuel Tank Capacity (litres): 50

Wheels
Drive: FWD
Wheels: 7x17

Standard Features
Dual Airbag Package
Anti-lock Braking
Automatic Air Con / Climate Control
Alarm System/Remote Anti Theft
Adjustable Steering Wheel
17 Inch Alloy Wheels
CD with 6 CD Stacker
Central Locking Remote Control
Electronic Brake Force Distribution
Engine Immobiliser
Limited Slip Differential
Leather Upholstery
Multi Function Steering Wheel
Power Mirrors
Power Steering
Power Sunroof
Power Windows
Radio CD with 4 Speakers
Rear Spoiler
Seat belt Pre-tensioner
Sport Seats
Sports Suspension

[LawryMonster]

DC2 Integra GSi
Released: Late 1993-2001
Engine: B18B2: 1.8L DOHC, 107kW@6300RPM
Torque: 172Nm @ 5200RPM
Weight: 1146kg


i have a 2000 gsi, dc4 and its a b18b1..........??

[Z]

Are all 'tegs, late93-2001 obd2? If not, when did they change to obd2?

-Z

[Miss VTi-R]

i was wonderin i have a DC2 96 mod tegs and its got a B18C2 motor in it
is that right??



BECS:confused:

[Stoosh]

could we plz get some specs on a DC4 :D

[FEL12X]

Wasn't it 101KW for GSI?? is there any different with the first and 2nd series B18B ?

[locote]

What is the 1/4 time for a standard Gsi manual 96????

[_CiVIC_]

wow the typeS and typeR both weigh the same!!! thats in the dc5 model of course.. the typeS has 7 more kws... do you think they would still be roughly the same in performance??? or would the typeS have a bit more grunt??

[JDM.Power]

wow the typeS and typeR both weigh the same!!! thats in the dc5 model of course.. the typeS has 7 more kws... do you think they would still be roughly the same in performance??? or would the typeS have a bit more grunt??

the type S would just have a little bit more grunt 7kw extra an only 2nm extra. but hey every little bit counts.

[180sx]

just bought a B16A DA9 , the owner told me that it got a B16A from a JDM EF civic ... just want to know how many KW can it pull ?

[toE]

180sx - Please start a new thread and ask your question.

[finn42]

very handy info, it would be good if someone could do similar for cars on this forum (ie preludes etc.)

[Yapster]

Hi guys,

Please help me out here. I'm from Singapore and i saw this ad online
http://www.sgcarmart.com/main/info-2fjMhPdN-1034.html

my main question is: it says it has a B18B typeR engine, but the thread started posted that a DC2 type R has a B18C engine..

i just want to know what im seeing is a "real" type R.. can anyone pls verify??

thanks a lot!!!

[Jezda9]

If possible i would like specs on 89 - 93 DA9 tegs
like stock power and torque

[Yapster]

ey i answered my own question

it was a typo
the car has a B18C :)

cheers

[Jezda9]

thanks for that i don't know what power i'm running but i broke the 100kw
me happy now
thanks

[oldskoolz911]

The 1989-1993 generation Honda Integra bears the code E-DA. This is the most important generation of models in Honda's history as this is where the legendary VTEC system was introduced. The very first VTEC engine was the 160ps version of the DOHC VTEC B16A and the very first model to use this engine was the DA6 Honda Integra RSi/XSi, first introduced by Honda in April 1989. Thus as the official JDM Honda factory manual for the DA6 states, the first VTEC engine in the world is a B16A bearing the serial number 1000001 and was used in an Integra RSi or XSi which beared the chasis serial 1000001 !

found at http://asia.vtec.net/specs/daintegra/ :)

[oldskoolz911]

oh and that site also has all the older integras specs

like..
Engine Line-up 1989 to 1991


Engine ZC carb ZC PGM-Fi B16A
Capacity(cc) 1590 1595
Bore X Stroke(mm) 75.0 X 90.0 81.0 X 77.4
CR 9.1 10.2
Specification 16V SOHC dual Keihin carbs 16V SOHC PGM-Fi 16V DOHC VTEC PGM-Fi
Max Power(ps/rpm)
manual/(auto) 105/6300 120/6300 160/7600
(150/7100)
Max Torque(kgm/rpm)
manual/(auto) 13.8/4500 14.5/5500 15.5/7000
(15.3/6000)
1st Gear MT/AT 3.250/2.705 3.250/2.647
2nd Gear MT/AT 1.894/1.560 2.052/1.566
3rd Gear MT/AT 1.259/1.027 1.416/1.111
4th Gear MT/AT 0.937/0.780 1.103/0.810
5th Gear MT/AT 0.771/- 0.906/-
Reverse Gear MT/AT 3.153/1.954 3.000/1.904
Final Drive MT/AT 4.250/3.933 4.437/3.933 4.400/4.428

[dc4t]

apparently the q/mile for a stock dc4 is 16.3?? is that right? coz they seem to go good against the b16a ls and in some cases beat them.. wats the standard q/mile time for a b16a ls?

[krovikan]

Import model

Integra XSI
Released: 1989-1991
Engine: B16A: 1.6L DOHC - 119kW @ 7600 RPM
Torque: 115 Nm @ 7000 RPM
Weight: 1140 kg

[gumbel]

when i bought my da9 a year ago (b18a1) its still stock , q/mile 15.7 and dyno @ 97hp atw

[zuihoujueding]

old school specs :)

Integra SX16
Released: 1/5/1986 - 1/5/1989
Engine: D16A3: 1.6L DOHC - 90kW @ 6500 RPM
Torque: 142 Nm @ 5500 RPM
Weight: 1020 kg

Hi, i see some have D16A1 in their 1st gen teg. u know whats the difference?

[FR33K]

Import model

Integra XSI
Released: 1989-1991
Engine: B16A: 1.6L DOHC - 119kW @ 7600 RPM
Torque: 150nm @ 7000 RPM
Weight: 1140 kg

[JDM_type_R]

would any1 be able to tell me the difference between the 96 spec ITR and the 98 spec ?

[type_r_118]

i beleive that the gsi is 101kw..the last time i checked..dunno i maybe wrong

[FEL12X]

can anyone tell what is a DA7 and whats engine in it

[Snoop_gee]

what about the type S

[TON33Z]

hey who's TON33Z?
they're my no. plates and ppl keep asking me if its me on the honda forum...

[rodericb]

The GSi has 107kw. I've seen some GSi's quoted at 106kw I think. Weights are 1120kg for manual and 1140kg for auto (VTi-r = 1150kg).

[Iwishiwasa Type R]

I dont know if i should start a new thread.

Ive seen a 2001 ITR dc2 with b18a on the engine.
Is this a transplant?...It also had a chunk of metal sticking out near the gearbox stating LSD...
Going by previous information b18a were only in integra LS..correct?
Did the LS have an LSD?
Is it safe to assume that a b18a has been transplanted into the car for whatever reason. Or is this a legit ITR DC2..

Ive also looked through this thread and I have a conflicting conclusions.

[chunky]

up the dc5s specs plz >.<

[T-onedc2]

I dont know if i should start a new thread.

Ive seen a 2001 ITR dc2 with b18a on the engine.
Is this a transplant?...It also had a chunk of metal sticking out near the gearbox stating LSD...
Going by previous information b18a were only in integra LS..correct?
Did the LS have an LSD?
Is it safe to assume that a b18a has been transplanted into the car for whatever reason. Or is this a legit ITR DC2..

Ive also looked through this thread and I have a conflicting conclusions.
LSD only came on ITR, B18A was used in DA, B18B in DC4. Overall sounds a bit suss, got pics?

[mik]

Ive got a 1989 teg LS DA9 and i cant find any specs? its a stocker too and before I start modding i need specs if someone can help out. Does this make it a gen 1 or 2.

[aimre]

WHats an integra GS-R?

DC2 shape

[Felix]

WHats an integra GS-R?

DC2 shape


GSR is the american DC2 VTIR...

[aimre]

Did they ever come auto? Coz my mate claims to have one but its auto with a redline lower than my EG. Also his rocker cover is black and doesnt say VTEC... I did look at the engine but forgot what B18 it was so i got no idea if it is a gsr/vtir

[blubber]

In Sydney? Its a gsi, non vtec.

[Felix]

Did they ever come auto? Coz my mate claims to have one but its auto with a redline lower than my EG. Also his rocker cover is black and doesnt say VTEC... I did look at the engine but forgot what B18 it was so i got no idea if it is a gsr/vtir


it would be a GSI, with a B18A.
VTIR/GSR dont come in auto, there redline is at 8200RPM, and the rocker cover is black and says "DOHC VTEC"

[locote]

The JDM SiR-G did come in auto and redline of 7500rpm ( b18c)

[Felix]

The JDM SiR-G did come in auto and redline of 7500rpm ( b18c)


Correction: redline on the SIR-G is 8250RPM. Well fuel cut is 8250RPM, redline might be 8200RPM..


Anyway, wasn't aware that the JDM SIR-G came in auto?
But we were talking about the US GSR, and AU VTIR.

[locote]

The front cut i purchased was auto redline cut 7500rpm B18c
Stock ECU is junk anyways with PowerFC i tell it when to cut!!!

[hndabldr]

you all forgot the USDM Rsx type S K20A2

[Ray_mon]

up the dc5s and 05+ dc5 specs please ^^

[Kyo]

This thread needs a final update as our beloved Integra has passed its production redline.

[EL_DC5]

The Type S has a K20Z Engine don't it?
any info on that.

[eskimosmart]

whole heap of info about the first gens although it has USDM models, it is same as AUSDM.

http://g1teg.org/specs/

and for the JDM specs

http://g1teg.org/history/

[ACTI0NMAN-1]

who's going to update the first post?

[EL_DC5]

Can someone Update the First Post to include the Type S engine K20Z

[TypeRice]

does the 2004 integra have a facelift?
(something like the EK facelift)

[EL_DC5]

Yeah the Facelift models are the 05-07 Integra's
Including the Type S

[T-onedc2]

First post Type S info added, give me the missing info and I'll fill the rest in k :)
-Tyson

[James The Wog]

after looking throught the hole apprence gallery in integra (yes all 83 pages lol) i want 1. I SEARCHED integra modles and this thread came up but im still confused (i think)

.oh k im gonna ask some real dumb ass questions here so sorry in advance , so the DC4 integra have the round frount lights and the DC2 have the squar shap frount lights?

im pretty shore i know the awnser to this next question but just wanna make shore coz it dosent have Specks for it in the 1st post, so theres the DC4 gsi witch is non v-tec right? so is there a v-tec version?

and is there a stock 2L version of the DC4 ?

sorry and thanks in advance

[tct]

after looking throught the hole apprence gallery in integra (yes all 83 pages lol) i want 1. I SEARCHED integra modles and this thread came up but im still confused (i think)

.oh k im gonna ask some real dumb ass questions here so sorry in advance , so the DC4 integra have the round frount lights and the DC2 have the squar shap frount lights?

im pretty shore i know the awnser to this next question but just wanna make shore coz it dosent have Specks for it in the 1st post, so theres the DC4 gsi witch is non v-tec right? so is there a v-tec version?

and is there a stock 2L version of the DC4 ?

sorry and thanks in advance

the square lights are just jdm lights ... the dc2 dc4 aus spec have the same style lights ... the vtec version of gsi is just the vti-r teg ... pretty sure DC dont come 2L stock ... u can make it 2L K20 or B20 hahaha lol

[Angie]

Can anyone expalin why I might have gsi brake calipers front and rear on a 96 vtir?? Did they change between series 1 and 2??

[Angie]

As above, i know why now, it is an integra vti!!! Not a vti-R!! HAd vti-R badge on when i bought it, but thing is it looks excatly like a vtir and has a B18C2xxxxxx engine in it?

[dc4t]

As above, i know why now, it is an integra vti!!! Not a vti-R!! HAd vti-R badge on when i bought it, but thing is it looks excatly like a vtir and has a B18C2xxxxxx engine in it?

huh.. theres no such thing as an integra vti.. urs is a vti-r, its got a vti-R engine in it.. brakes on the gsi and vti-r are the same anyway, im pretty sure..

[T-onedc2]

As above, i know why now, it is an integra vti!!! Not a vti-R!! HAd vti-R badge on when i bought it, but thing is it looks excatly like a vtir and has a B18C2xxxxxx engine in it?

got pics? there's no such thing as a vti integra

[Angie]

Here is apic

http://i106.photobucket.com/albums/m280/TUF555/Integra/Picture237.jpg

But i have looked at redbook and matched vin and engine number and it is a vtir, bendix have some weird brake pads for the vtir listed, it actually takes gsi pads???

Also honda said its listed as a vti, and he said it is not a vtir its an in between model, he obviously was not in the business 11years ago, no where i found had info about a vti model being produced

[dc4t]

Here is apic

http://i106.photobucket.com/albums/m280/TUF555/Integra/Picture237.jpg

But i have looked at redbook and matched vin and engine number and it is a vtir, bendix have some weird brake pads for the vtir listed, it actually takes gsi pads???

Also honda said its listed as a vti, and he said it is not a vtir its an in between model, he obviously was not in the business 11years ago, no where i found had info about a vti model being produced
yes definitely a vti-r.. but like i said.. pretty sure the vti-r n gsi have the same brakes.. except vti-r had ABS

[Angie]

Well I have got gsi pads and they fitted, so yeah weird

[Dr.k20z1]

from previous memory i think the type s has 154kw not 153 lol just stating it.. so yeahh..

rickeeee

[stanleym]

jus curious the dc5 integra coupe

is that the same stats as for the dc5 luxury? or was the dc5 luxury the type s stats??

i think the dc5 teg coupe is 5 speed also

[Dr.k20z1]

i dont know abt the luxury and coupe.. but no way the luxury is type s stats LOL cant believe u asked that hahaha

why wud it be called type S then? LOL why wud it cost more LOL

+ type S is 6 speed with the k20z1 lol

[Hullabaloo]

Some updated info:
DC5 Integra Type R
Release: 2001
Engine: K20A2
Specific: Redline@7900RPM
Weight: 1,160Kg (without air conditioning - optional)
Standard features: 2 Airbags

DC5 Integra Type S
Release: 2005
Engine: K20Z1 2.0L DOHC i-VTEC, 154kW@7800RPM, 194Nm@7000RPM
Specific: Redline@8100RPM
Weight: 1230kg (with a/c - standard equipment)
Standard features: 4 Airbags, leather seats, sunroof, 6 stack mp3 cd player, power windows/steering/mirrors
Additional: Bridgestone RE050 215/45/17, Enkei alloy wheels (17x7)

[T-onedc2]

First post updated, sorry it took so long....


Some updated info:
DC5 Integra Type R
Weight: 1,160Kg (without air conditioning - optional)

A/C was optional on JDM DC5R, are you sure it was optional on AUDM? And which one weighs 1,160kgs?

[Hullabaloo]

Based on the Honda Australia brochure for the integra:
http://www.honda.com.au/wps/wcm/connect/2c013a804600d2bdbb50bf823e4d2e7c/Integra_Brochure_Sep03.pdf?MOD=AJPERES

it says 1160kg is the weight and it says air conditioning is an option.

[T-onedc2]

Although the pics are of the JDM models the stats are AUDM, thanks for the link, updated again.

[dc4t]

Some updated info:
DC5 Integra Type R
Release: 2001
Engine: K20A2
Specific: Redline@7900RPM
Weight: 1,160Kg (without air conditioning - optional)
Standard features: 2 Airbags

DC5 Integra Type S
Release: 2005
Engine: K20Z1 2.0L DOHC i-VTEC, 154kW@7800RPM, 194Nm@7000RPM
Specific: Redline@8100RPM
Weight: 1230kg (with a/c - standard equipment)
Standard features: 4 Airbags, leather seats, sunroof, 6 stack mp3 cd player, power windows/steering/mirrors
Additional: Bridgestone RE050 215/45/17, Enkei alloy wheels (17x7)



type R has 147kw@7400rpm and 192Nm of torque @6000rpm

[vtec_man]

hey just a qwik question. did the integra dc2 type r ever come out with an electronic sunroof?? thanks

[T-onedc2]

Sunroof was only an option afaik, defeats the purpose of a Type R imo.

First post updated.

[Frost_FD]

When did they stop selling DC5R in australia as i am trying to import this from Japan.

[danielj]

production finished 04 i believe

[i-jrdm]

dc2 vtir's ftw!!!
just recently bought a thuder grey 93 model for cheap
building her up at the moment :)

[absolutR]

Sunroof was only an option afaik, defeats the purpose of a Type R imo.

First post updated.

labelled also buy manufactures a defect due to the chassis' construction.

[absolutR]

When did they stop selling DC5R in australia as i am trying to import this from Japan.

theres heaps on the market, why import? takes way too long man!

[Frost_FD]

theres heaps on the market, why import? takes way too long man!

Can we import DC5 to aus?

[EL_DC5]

in japan you could still get them still 2007

[kairi_k]

hey just a noob q's are the engine figures the power off the Fly or at the wheels? also apx how much differnce between the two

_k

[Hullabaloo]

Flywheel. about 25&#37; drivetrain loss for FWD I think.

[T-onedc2]

Flywheel. about 25% drivetrain loss for FWD I think.
Yes that's about right

[T-onedc2]

First post updated


Some questions incase anyone else knows:
did the AUDM DC5R have brass or carbon synchronisers on 5th and 6th gears? Apparently the DC5S has carbon.
Does the DC5S have a larger throttle body?
Is the air intake duct larger?

[RtN]

hey for the ITR what is the engine model for the JDM ITR? B18C?

[T-onedc2]

yes B18C

[xedent]

how much does a rwd car loose through drivetrain ?

[T-onedc2]

how much does a rwd car loose through drivetrain ?
some manufacturers vary due to materials used, eg. Nissan R33 NA Skyline vs Toyota NA Supra, Nissan is more efficient by almost 10% according to one test I saw years ago.
Generally rwd may lose 30-40% depending on make and transmission type.

[05integra]

hey you've listed what I think is my car.

the one with 118kw from 2001 onwards.

I'm a QLD p-plater and I just bought a magnificent 05 integra luxury.

I'm looking for just smal things like lowered suspension, performance chip, body kits, cold air induction kits.

Í don't know much about honda, but I'm trying to learn... AND FAST, cause I love my new car.

thanks for any help you, or anyone else can give me!

[T-onedc2]

hey you've listed what I think is my car.

the one with 118kw from 2001 onwards.

I'm a QLD p-plater and I just bought a magnificent 05 integra luxury.

I'm looking for just smal things like lowered suspension, performance chip, body kits, cold air induction kits.

Í don't know much about honda, but I'm trying to learn... AND FAST, cause I love my new car.

thanks for any help you, or anyone else can give me!
Hey, best to put this question in a new thread in the Integra section as it's off topic in this thread.

[Moey.C]

hey i was spun out big time when i saw a 4 door sedan dc4 . WHAT THE HELL ? ? never have i seen it or read about it anything. and yes im sure it was an integra

[T-onedc2]

hey i was spun out big time when i saw a 4 door sedan dc4 . WHAT THE HELL ? ? never have i seen it or read about it anything. and yes im sure it was an integra
it's called a DB8 and there was a Type R version also

[power_of_dreams]

anybody know if a new teg is in the pipelines?

[blagz87]

So is the type s quicker than type r, it has 8 more kw?

[Ashwee]

Extra info on the DA9.

Dimensions
Kerb Weight (kg) 1147
Tare Mass (kg) 1117
Wheel Base (mm) 2550
Length (mm) 4390
Width (mm) 1710
Height (mm) 1325
Track Front (mm) 1475
Track Rear (mm) 1475
Engine
Engine Location Front
Engine Size (cc) 1834
Cam Double Overhead Cam
Engine Cycle 4 Stroke
Engine Type Piston
Engine Number B18A1
Cylinders 4
Valves per Cylinder 4
Compression Ratio 9.2
Power 96kW @ 6000rpm
Torque 170Nm @ 5000-5000rpm
Induction System Aspirated
Fuel Delivery Multi-Point Injection
Method of Delivery Electronic

Wheels
Rim Material Alloy
Front Rim Description 14x5.5

[T-onedc2]

Extra info on the DA9.
Updated. Thanks :)

[brendo]

hey guys i just brought a 91 xsi integra with the b16a motor and was woundering wat performance specs it put out. eg KW's
thanks.

[mrmango]

what does Cutout 8,200RPM mean? lol sorry

[ChiLLie]

what does Cutout 8,200RPM mean? lol sorry

means if you rev to that limit (or try to go beyond it), the fuel supply will be cut, in order to save your engine from going 'boom' thru the bonnet ;)

[randalln]

what about the JDM DC5 Type-R

Pushes 162kW...


2001-2007 JDM Honda Integra Type-R (DC5)

Stats:

2 L (1998 cc, 122 cu in)

220 PS (217 hp/162 kW) @8000, 206 N&#183;m (152 lb&#183;ft) @7000:

K20A engine

Only sold in Japan.


Does anyone have more info on this car?

[sebastiandivita]

Hey guys, just a quick question , is there much of a power difference between the DC2 GSi and DC2 Vti-R? Does the Vti-R have Vtech?

[T-onedc2]

Hey guys, just a quick question , is there much of a power difference between the DC2 GSi and DC2 Vti-R? Does the Vti-R have Vtech?
DC4 is GSi B18B non-vtec 108kw, DC2 is VTi-R B18C2 vtec 125kw

[sebastiandivita]

nice, if i were to say do an engine 'trantsplant' would the B18BC2 fit into the DC4's engine bay? does it fit all of the original engine mounts of the B18B??

[luxury_lowrider]

the Type S
has a different kit to the JDM
the rear bar of AUDM has a larger plate holder
the rear bar of JDM has a snugg fit plate holder

[smallsn]

Can DC2 front bumpers fit onto the DC4?

[dc2r-man]

Whoever has access to edit the first page, can you please update the dc2r information on the size of the discs etc as well as fix the broken link in additional info!

thanks

[Zenki]

Could someone please tell me/show me some website that has a bit more information about the DC5 Integra Coupe?

And is this Integra - http://www.carsales.com.au/private/details/honda-integra-2003-12438019?base=1216&vertical=Car&eapi=2&page=1&sort=~Price&cr=10&__N=1246%201247%201252%201282%204294965322%2042949 65105%20901%201216&silo=Stock&Range=Price:Min,Max~0.5 - the DC5 Coupe?

[PJD_87]

Hi all,

I've just joined this forum and was wondering what the difference was between the Integral Type S 2004 - 2006 models (if any?).
I've tried researching this subject and found a detailed Wikipedia page summarising significant differences between the 04 and 06 models (ref: http://en.wikipedia.org/wiki/Honda_Integra_DC5), a lot seems to have changed between these year models.

The reason I ask is because I'm looking at purchasing an Integra Type S and wanted to make sure I wasn't missing out on any major upgrades. It seems that gear ratios, suspension etc. were all upgraded - however I'm not 100% sure that this is related to models brought into Australia.

I hope someone may be able to shed some light on this for me?

Many thanks in advance.

Peter

[Grady93]

im looking at buying a 95 model integra, its the 1.8l vtec dont know which engine it is, sunroof, manual, coloured door moulds, 4 stud... is it gsi or vtir?

[infurNOS]

im looking at buying a 95 model integra, its the 1.8l vtec dont know which engine it is, sunroof, manual, coloured door moulds, 4 stud... is it gsi or vtir?

We have stated in your other thread that if it has a VTEC engine (there is only one type of engine found in the VTiR Integra) it is a VTiR....

Only the Type R's came 5 stud.

[lolmclol]

im looking at buying a 95 model integra, its the 1.8l vtec dont know which engine it is, sunroof, manual, coloured door moulds, 4 stud... is it gsi or vtir?

sometimes they don't come with retractable windows, that's normally an aftermarket option.

[aspirin_ash7]

Hey guys,

Just wondering - base model integra dc5 2002. Where you have listed Torque is that the torque for all wheels or just rear wheels? Sorry im noob XD

[fillit]

Hey guys,

Just wondering - base model integra dc5 2002. Where you have listed Torque is that the torque for all wheels or just rear wheels? Sorry im noob XD

http://www.medstudentsonline.com.au/attachments/f48/705d1348124483-umat-2012-thread-909263d6_2291482-not_sure_if_serious.jpeg

It's calculated at the fly my friend, I'll let you figure out what drive the integra has.

[Rolla_Kid]

Bro oll fats cars r rer weels, of cors the ntgra haz tork et dem reer weelz!!!1