View Full Version : eg series compatability
Alot of aftermartet companys make parts that will fit on the eg6, apart from the obvious engine differences are parts like suspsnsion catbacks ect. made for eg6 able to fit on other eg hatches. maybe a dumb question but wasnt sure.
[[d a n n y]]
30-01-2007, 04:06 PM
yes it will
but if u wanna put Eg6 coilovers on u need the EG6 lower control which are the same as the DC2 ITR control arms.
so the lower control arms are different on different egs
JasonGilholme
30-01-2007, 04:42 PM
Only the EG6 ones.
The rest of the EG's are the same
EG2,5 etc = DC2
EG6 = DC2 Type R
tRipitaka
30-01-2007, 05:05 PM
Only the EG6 ones.
The rest of the EG's are the same
EG2,5 etc = DC2
EG6 = DC2 Type R
EG9 = EG6 too..
and i believe JDM EG4 is the same as EG6 too
and (if you can find one) EJ1 = AUDM EG LCA
although if you want a set of extractors made for EG6, it won't fit any australian EG.. unless a b series engine has been put in..
JasonGilholme
30-01-2007, 05:12 PM
EG9 = EG6 too..
and i believe JDM EG4 is the same as EG6 too
and (if you can find one) EJ1 = AUDM EG LCA
although if you want a set of extractors made for EG6, it won't fit any australian EG.. unless a b series engine has been put in..
:thumbsup:
Except for an EG2 ;)
RMN15N
30-01-2007, 09:41 PM
eg6 = dc2R front sway bars fit straight in =D
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.