PDA

View Full Version : DC2R idling issue



JDM-DC2R
01-02-2007, 08:33 PM
My car now idles around 1.1-1.2k after warm up and when I step on the clutch to try to change gear, the rpm will drop to 1.5k instead of 7xx-8xxrpm. Also when i step on the clutch the rpm drops lot slower than before

What happens?

TODA AU
06-02-2007, 04:26 AM
My car now idles around 1.1-1.2k after warm up and when I step on the clutch to try to change gear, the rpm will drop to 1.5k instead of 7xx-8xxrpm. Also when i step on the clutch the rpm drops lot slower than before

What happens?

What have you changed on your car prior to the problem occuring?

It sounds like you may have an air leak...
Look around intake manifold... Fuel pressure reg etc

It could also be something obstructing the throttle cable.

EuroDude
06-02-2007, 08:21 AM
The engine is not breathing properly at idle.

Give the Throttle Body a clean with carby cleaner.
Also clean the IACV.
(Search the DIY section for "Throttle" and "IACV")

Dont adjust the Idle Screw, you should fix the source of the problem first.

JasonGilholme
06-02-2007, 08:45 AM
Check your throttle cable before you check anything could be as simple as that.