gen 2 1/4 mile times

[CRX08U]

my best run was a 15.3 at WSID last nyt
thats in a d16a8

[ALLMTR]

Nice! What is done to it?

[EKNR33]

Hey man, good stuff on the times i was there in the white skyline racing your mates red lancer LOL. i'm surprised the d-series performed so well

[flypig]

Well done D-series! What's done to the car? Stripped interiors & what size wheels?

[CRX08U]

thx guys for the good replies
mods are extractors and full 2 inch or 2 and a half not 100% sure exhaust system pod filter and an excedy hd clutch
no interior removal jus spare tyre and i ran on my stockies
yer i was very suprised to get that time 2
but now that i got that u guys might hear me crackin 15 flat soon lol
yer i remeber the white skyline lol im headin out dere agian this wed comin up if any other gen2s are thinkin of racin

[flypig]

I am building up my Gen2 CRX at moment (for track/circuit use only), either Turbo D16 or B18cr but once the car is ready, I hope i can bring it down & race with you...

[CRX08U]

R/T .818
60' 2.324
330" 6.467
660' 9.896
mph 71.64
1000' 12.846
ET 15.361
MPH 89.81
kMH 144.54

= pure sleeper gen2 lol haha

[Chris_F]

cool shit! that's a good time

d-series!

[CRX08U]

yer im hopin to hit the 14 sec barrier in the next month or so but we will see how it goes

[EKNR33]

well with a 60' of 2.324, the run of thumb or there abouts is for each 0.1sec you shave off your 60' you take around 0.2 off your ET.

Maybe time for some drag tyres or better rubber? <still retain lightweight rims though>

[CRX08U]

yer im hopin i can improve my 60 ft but i dont no wat tpe of launch will get me a faster 60ft time and im also gunna change gear a bit earlier i think im over revin engine

[OB]

Great time mate... :thumbsup:

what suspension you running..?

[CRX08U]

lol stock springs and struts lol that are rooted too lol

[CRX08U]

does any1 else on a d series thats run there car down 1/4

[Drew]

Stock EF8 W/ Intake pipe and removed headlight ran 15.10ish

[CRX08U]

nice man u got pics or time slip

[EG5]

My old EG hatch SI d16a8 back in the days :
15.1@89mph
2.1 sec 60 ft

http://img.photobucket.com/albums/v677/YonasLiu/YONASeg5.jpg

[CRX08U]

thats good stuff man i wanna get a lower 15 or a 14
would be good gotta get a betr 60 footer and betr shifts i need to change earlier

[Drew]

nice man u got pics or time slip

got pics of the CRX but not on the strip or times :(

[CRX08U]

got pics of the CRX but not on the strip or times :(

post up the pics in the gen2 crxs thread or in here but moderators might not allow it :confused:

[crx51]

Must say im impressed with the times some of you have pulled out of d16a8's, low 15's is what a standard b16 crx should do. I have ED9 crx with dseries, im going to have to get a full exhaust and extractors if it will help me into the early 15s. I havent yet run my car down the strip but i would have been happy with a very low 16. Not now, gonna have to get working on the performance now.

[Drew]

Here are the pictures for ya all

http://www.nvrfgt.co.nz/gallery2/My+Cars/lilrex/

[CRX08U]

Must say im impressed with the times some of you have pulled out of d16a8's, low 15's is what a standard b16 crx should do. I have ED9 crx with dseries, im going to have to get a full exhaust and extractors if it will help me into the early 15s. I havent yet run my car down the strip but i would have been happy with a very low 16. Not now, gonna have to get working on the performance now.

yer i was really impressed with the d series doin that im gunna have to get into high 14s now just to stay 1 step ahead lol ;)