PDA

View Full Version : what dvd tv unit will work in s2k?



integrity
03-02-2007, 08:04 AM
hey guys ive seen a few s2k around wit aftermarket dvd screen units..

i want to install ine but i dont know how it will come out..

as you all know where the s2k head unit is mounted doesnt allow the screen to properly open if you were to put one in

fadz
03-02-2007, 08:12 AM
get a JVC KDAVX2 it has a small 3 and a half inch screen , iv got the older model KDAVX1, in a civic though...but yeh you can adjust how you want to open it and stuff etc...
if your after a bigger dvd deck that comes with a 7 inch screen etc, just dont push the Deck all the way in?
push it to the point where your tv can stil come out..my 2 cents mate.

BRU51N
03-02-2007, 10:46 AM
alot of the s2 owners go with the double din tv, and get the jdm spec s2000 bezel for the nice flush look. theres a spot for it right above your current headunit, that doesnt have anything behind it (eg. air bags or electronics)

the easier option would be going with the jvc avx1 or avx2 fitting in the standard din, however u only get a small screen with that.

ludecrs
03-02-2007, 04:17 PM
1. Dont spam
2. As already mentioned, it wouldnt fit in our car so why bother posting your spam shit?

chicken8
03-02-2007, 10:43 PM
double din will only fit if you cut into your dash and fit a JDM bezel

otherwise in your original radio slot, only the single din 3inch screen players will fit, the most popular being the JVC KD-AVX1 and the JVC KD-AVX2

i had a AVX1 and the screen is not small at all. just nice for in car viewing. although the driver rarely will use the screen. the AVX2 came with a bigger screen. 3.5inch

TRU32U
03-02-2007, 11:47 PM
anyone got piks of this jdm style dinn?? im intersted

chicken8
03-02-2007, 11:59 PM
http://www.euroboutique.us/upload/Eclipse_overview.jpg
http://www.euroboutique.us/upload/Eclipse_open.jpg

integrity
04-02-2007, 06:44 AM
thanks guys...
im aware of the kdavx2 unit but i was told it woill not fit properly behinf the door for the head unit ...

do i need to buy a DCI? (Idash control interface)...

are JDM bezsels available??

can i just cut in and attached a double din unit?

chicken8
04-02-2007, 09:09 AM
your radio door wont close with the face plate attached for the AVX2. you can get the install shop to cut into the bracket or the deck by 5mm-10mm and then your radio door will close flush

with all headunits you will need a DCI to retain use of your dash interface

you can buy JDM bezels. but to DIY is going to be a crazy job. you will need to run cabling into your dash. since all the current cabling is in your radio slot.

AUSS2000 has done it on his i believe. perhaps ask him how hard it was

ROLLED
04-02-2007, 11:17 PM
AusS2000 and Replicah on S2ki have done it, head over there and search it up for more information!

crazy_legs
05-02-2007, 10:27 AM
http://img01.picoodle.com/img/img01/7/2/4/t_interiori_439fm_289ff13.jpg (http://www.picoodle.com/view.php?srv=img01&img=/7/2/4/f_interiori_439fm_289ff13.jpg)

integrity
05-02-2007, 03:25 PM
yeah i dont know which way to go ..
i guess im gonna keep it simple and go kdavx2 or 1 ...
ill just find a DCI to run for the mean time

zero33
08-02-2007, 09:42 AM
yeah i dont know which way to go ..
i guess im gonna keep it simple and go kdavx2 or 1 ...
ill just find a DCI to run for the mean time

did ya get a price on this unit?

integrity
08-02-2007, 11:34 AM
400 for the unit and 100 for DCI installed

zero33
08-02-2007, 11:56 AM
400 for the unit and 100 for DCI installed

Are you able to let me know where your getting this price from? very interested.

thanks champ

SNKS2K
08-02-2007, 06:56 PM
Are you able to let me know where your getting this price from? very interested.

thanks champ

same here please
thanks

TRU32U
09-02-2007, 03:01 PM
dammn thats the whole dash thingie then basically needs to be changed??
or we chopa hole in there??

SNKS2K
09-02-2007, 04:05 PM
i'm guessing you just you just cut a hole. but what do you do when you wanna sell the car and and take out the unit?

jimmiboi
15-03-2007, 10:32 PM
can anyone link me to where to get the jdm bezel or give me a part number for it? and roughly how much is it
thanks

crazy_legs
16-03-2007, 01:43 PM
check out japanparts.com
It's listed as 3,600.00 YEN = $38.94 AUD plus shipping maybe addtional $50

SNKS2K
16-03-2007, 07:17 PM
check out japanparts.com
It's listed as 3,600.00 YEN = $38.94 AUD plus shipping maybe addtional $50

where did you find that? i went to the webpage.... not sure where to navigate to find it

crazy_legs
17-03-2007, 01:07 PM
On the quick search pane (on the left)
Car Maker = Honda
Car Model = s2000 AP1/2
Parts Category = +- Interior - others

chicken8
19-03-2007, 08:54 PM
check this out guys

i think this is prolly a first. and quite amazing

http://s2000alex.spaces.live.com/?_c11_PhotoAlbum_spaHandler=TWljcm9zb2Z0LlNwYWNlcy 5XZWIuUGFydHMuUGhvdG9BbGJ1bS5GdWxsTW9kZUNvbnRyb2xs ZXI%24&_c11_PhotoAlbum_spaFolderID=cns!4F9D3F1F9ECA5879!2 00&_c11_PhotoAlbum_startingImageIndex=2&_c11_PhotoAlbum_commentsExpand=0&_c11_PhotoAlbum_addCommentExpand=0&_c11_PhotoAlbum_addCommentFocus=0&_c=PhotoAlbum

chicken8
19-03-2007, 08:55 PM
http://tkfiles.storage.msn.com/x1pjzF2-RYhxRUQdu4cjQcCzjEfJbJIi1tLoAH7VI0OZGgrlQxMolqqRzH FepT2kQiz5KTMkr7akt-oAz9IrsJKKemOFRkGoPXStfLw_dE-ia8G5uKEH-S69w
http://tkfiles.storage.msn.com/x1pjzF2-RYhxRUQdu4cjQcCzrjAEVNpSuG7TpiM2_xfOiA7_UrFOvU10oC 3NtFh_yGVZ3B9c0EEZQje4JceZuU7hJADGnWeZG54t85Q_B7ss 1rSE1mST_nanA
http://tkfiles.storage.msn.com/x1pjzF2-RYhxRUQdu4cjQcCzrD9VAOSjLMIayfLLh5Asf5ultKdYsYYgNv 77StWU_Yomv8M4M7E02IRW7Sn4E8LS-hSu5dQLmzU_5MitVPRXwE
http://tkfiles.storage.msn.com/x1pjzF2-RYhxRUQdu4cjQcCzpZiqHvUsmIvdTCVWl87LPYXTQGfNkFYz_E SGjqo4gEu4YGoIR501vcYkGzCyDo7L-XJWd3Y6Tx7gVObaapzk7CrsskXkjdVNw

zero33
26-03-2007, 12:28 AM
any DIY write ups on this one?