ABS light

[abzndintegra]

Guys i cant find a DIY to clear the ABS light if it stays on, anyone point me in the right direction?

BTW i got a 5th Gen Prelude

[bigjo5]

well u most likely would need one of those scanners LOl easiest way.. but i dont think u would afford that so just go to a mechanic they should have one of them computer scanners and can erase the abs error.

[ECU-MAN]

plug a short conector in the blue SCS conector,

press the brake pedal

turn ignition on

when the ABS light comes on undo the short conector with in 4 seconds

when the ABS light goes off plug in the short conector with in 4 seconds

when the ABS light comes on undo the short conector with in 4 seconds

then the ABS light will rapidly blink to indicate ABS DTC memory cleared

[abzndintegra]

I knew ECU-MAn would come to the party! thanks mate ill give it a go and let u know how i go.

[abzndintegra]

guys anyone know where the SCS connector is on the prelude, i checked near the ECu but couldnt see it, i also checked on the other side (near the shifter) but it aint there either.

[ECU-MAN]

remove the cover in the green circle


its the 2 pin blue connector :)


http://b16a2.kicks-ass.net/tech/prelude-SCS.jpg

[barefootbonzai]

where's the SCS on a civic? Is that the thing you jump for ecu codes?

[XB-16-AX]

where's the SCS on a civic? Is that the thing you jump for ecu codes?
the SCS on the civics should be near the ECU its a blue plug (ithink) passenger kick panel. - definately for EG Civics but for EK hmmm

ED/EF should be in the engine bay on the firewall - a brown plug.and YES it is that "thing" u jump for CEL codes :p

[ECU-MAN]

ek will be in the same area as in the pic above of the lude.

[barefootbonzai]

thanks man, so it's NOT the 2 wire blue thing you use to jump ECU codes right

[ECU-MAN]

yes it is the two wire blue connector for the pgmfi

same one.

[barefootbonzai]

cheers - you da man. just have to try it now hope it works.