PDA

View Full Version : '00' Roof issue



Daniel Muratore
14-02-2007, 10:08 AM
Hi Guys

I have an '00' S2K, I have noticed that from the inside of the roof just below the plastic window that there is a small rubber like bar that runs along the bottom of it, appears to act as a support. it has come un glued on the right hand side. Has anyone else had this problem? and is it just a matter of glueing it back on or does it require a special adhesive?

Thanks

crazy_legs
14-02-2007, 01:44 PM
Use a hot glue gun and stick it back together.
Suggest you do it in 2 parts, (if the black rubber has come off from the plastic rod and come unstuck on the roof it self.) restick the rubber, let it dry, then reglue it back to the roof.

You'll need to do it with roof up obviously, which can be a bit cramped.

Good luck

Daniel Muratore
14-02-2007, 03:18 PM
thanks bud, will give it a crack, your right though not much room to work in there.