Good ECU for a Turbo B18b

[[SDCTVE]]

ok i prob asked this before but didnt get the answers i want and not enough opinions

im after a Good ECU to run a turbocharged B18b,

something reliable that isnt too expensive

and i definately dont want to spend more then $1000 and thats fitted and tuned and set!

does anyone know of any good brands?

also places to do it at.

[Sexc86]

hmmm since you are in melbourne it wouldnt cost too much to do a s100 hondata tuned by james as he is located in melbourne too,.... i think that would suit your budget

[[SDCTVE]]

nah i dont want hondata, i know about james

maybe something like microtech or motec,

does any1 know how much they are?

[DLO01]

;1070098']im after a Good ECU to run a turbocharged B18b,

and i definately dont want to spend more then $1000 and thats fitted and tuned and set!

Tunning your setup will eat over half your budget and you haven't even got your Ecu yet.

[XB-16-AX]

Motec costs normally for a basic bottom end Programmable ECU is like 2000 supply only. <-- way off your budget but they are excellent ECU's.

Microtech is fine, basic LT8 models i think is about 6-800 supply + fit + tune. ther is also WOLF3D plug and play ECU's but they start from 1300.

why dont you try a piggyback progammable ECU's like Haltec, Unichip, GReddy E-Manage, etc.

Honestly dude, for $1000 budget, that would only get you the ECU supply then fitting is approx 2-300, then tuning of 3-5hrs worth is 350-800. it aint gunna cut it, your best bet would be Hondata S100 or piggyback system.

Just shop around on the forums, as you may pick them up second hand cheap to some fella demodding their beasts!! due to defects or accidents.

Good luck champ!

[[SDCTVE]]

what about apexi power fc, without a handheld control

[[[d a n n y]]]

power fc will set up back about a K
u have a unrealistic budget.
save up more. 2nd hand power fc ecu will be around 600-700 bucks and a initial tune can cost up to 1K if u want it done right.
in the end u get what u pay for

[XB-16-AX]

i
why do people skimp so much on the ECU and tuning, when screwing that up will cost you the most?!

Word to that !!! :thumbsup:

Thats why in my case im saving up for the real shiett.. proper ECU, tuning & fitting.

so no mucking around in the end ..and yes u will be satisfied of the hard labour from work/pension etc.. and the time it took to save up the dosh!

:rolleyes:

[[SDCTVE]]

ok i get it, new budget $1500 LOL

[poid]

OK, a few more options then :p

Have a chat to Andy at AK motorworks, he'll sort you out (pornstar on these forums)

[ACTI0NMAN-1]

you can always go crome or uberdata. but thats if you are willing to take a risk as it can be a bit buggy. As yet i havent had any trouble with crome.
I think thats the best you can get for $1000 parts and tune. unless you go for hondata as previously mentioned.

go andy, go andy, go andy, go andy!

[[SDCTVE]]

yea i know andy, i just picked up my car from him yesterday LOL

[bungsai]

LOL oh you bought gsipsi.


;1073132']yea i know andy, i just picked up my car from him yesterday LOL


then why are you back on ozhonda asking here??:wave:

btw i have an itr gearknob if u want it.

[[SDCTVE]]

how much for the gearknob, is it original or imitation?

[Q_ball]

Keep your sales, buy interest to PM.
Don't spam up the tech thread with this info.

[SMEAGLE]

just get a hondata s100 and tell dyno dave or adrian to tune it

should cost about 1k or so,, maybe abit less if you can come up with a p28 or p72 replacement ecu.

[fishman]

was just about to say... if you're in melbourne Pornstar (Andy) is your man ;)

[GSI-PSI]

have you replaced that stuffed engine in the car yet or is it still puffin away lol. Mate an ecu isnt gonna fix ya rings lol Makes me laugh how people like you think you know about cars when you dont even know how to wipe the crap off your a55. Cheers for now PAT

[[SDCTVE]]

*bennjamin edit NO NEED*

dont get so cocky...

and yes i did replace my engine...

[defect]

Sorry, might not be useful but how many aftermarket ecu support a/c?
does mircotech lt8 support ac?