PDA

View Full Version : Installing a JDM Suspension..


fuze
07-03-2007, 04:43 PM
Do i need to change anything to install a JDM Suspension to a AUDM model..?
Btw, it's for a DC5R..?
notorious_ahmie
08-03-2007, 11:10 AM
if the sussy is made for the dc5r then it will fit.
fuze
10-03-2007, 03:01 PM
yes it is, but it's for a JDM model..
and the JDM has a different LCA, Swaybar, Shock Absorbers, Wheel size and yea, i just suspect that mabe it need something before installing it..
DreadAngel
10-03-2007, 04:52 PM
You practically answered everything yourself there kekeke
fuze
11-03-2007, 04:50 AM
noo, what i ment was "do i need to change any of them..?"
teg94
11-03-2007, 12:15 PM
hey i just did a coilover setup on my teg 94 model. u have to check your suspension and check whether its a ball shape or fork shape. Then check your stock lca's (can normally look underneath the car from the rear and you will see it).
I used the HSD coilovers and they needed lca's from the jdm tegs to fit it on my car.
hope that helps.
maracer
11-03-2007, 02:34 PM
Everything should fit fine:thumbsup: