PDA

View Full Version : How to oil power window



Dell99
09-03-2007, 06:35 PM
help guys, on my passenger side the power window seems to be weak. As in when i press it to go up it sorts of skips (as in how an old wind screen wiper goes). N its even worst if its been raining thus i am thinkin that the rain water went down the window n into the mechanism.

how can i oil it up

b18c_crx
09-03-2007, 09:33 PM
yeha i got the same prob man! any one know a way to fix that? let us know too

aaronng
09-03-2007, 09:36 PM
Try lubing the rails with graphite powder first.

Rice_4_life
10-03-2007, 02:33 AM
lube the run channels first and see how that goes, just a can of lube will do, I use good old silicon spray with a spray nozzle.

Dell99
10-03-2007, 02:42 AM
can u give a better explanation. As in buy a can, place the tube between the window and the seal and spray?

Rice_4_life
10-03-2007, 02:47 AM
umm it's pretty much self explanatory. The run channel is the rubber that guides the window so you spray there just a quick run up with the spray both both sides and run the window a couple of times, should make the window smoother when operating.

Zdster
10-03-2007, 05:22 AM
As Aaron said though, dont use silicon spray use graphite powder.

aaronng
10-03-2007, 10:05 AM
Lube the 2 channels on the left and right that guide the windows up. Not the one at the bottom where the window comes out from :p

Zilli
10-03-2007, 12:08 PM
where can one get graphite powder from?

aaronng
10-03-2007, 12:14 PM
Bunnings or supercheap auto.

b18c_crx
10-03-2007, 07:10 PM
that good info guys:thumbsup:

Zilli
11-03-2007, 07:18 AM
cheers aarrong