DC2/R seat belt buckle question

[EG30]

I've fitted a SR3 seat with OE DC2R rails and EG seat belt buckle in my EG Si, but the SR3 seat hinge metal plate hits my buckle and splits the casing open.

Had a look at the setup on our DC2R tonight and realised the Dc2R belt buckle has a kink in its mounting plate.

Could you guys with normal DC2's tell me if you belt buckle has a kink in it or straight plate as per the EG?

I got a feeling they would be the same as the EG except they are black instead of grey. Just want to check b4 I hunt around for 2nd hand buckles.

Thanks

http://img163.imageshack.us/img163/4585/img4575ze7.th.jpg (http://img163.imageshack.us/my.php?image=img4575ze7.jpg)

http://img260.imageshack.us/img260/9673/img4576tz9.th.jpg (http://img260.imageshack.us/my.php?image=img4576tz9.jpg)

[Q_ball]

From memory no, theres no kink in the DC buckle.
I had to get a buckle from my oem DC4 seats and fit them onto my SR3's when i installed them, and didnt have any issues with a splitting buckle casing.

[teaseR]

if not just get some pliers and bend the metal out

[90LAN]

no problems with the swap into a eg i used the original dc2r buckles

[EG30]

ok thanks guys for the info, looks like I'll source a set of used DC2R buckles from this forum.