angle eyes question

[markoJEK1]

got some angle eyes, n ive relized that one of my headlights angle is higher than the other, and the angle eyes supposed to be adjustable, can anyone give me a run down of how to do it?

[IZY-10]

look on the back of the unit. there should be screws on the back with large kind of washer things with theraded edges. Just turn it around. There should be two of them, one horizontal and the other for vertical. Hope that helps

[blazin206]

I had the same problem when i installed my aftermarket CTR headlights.

Just line your car up on a flat surfce preferbly where its dark and turn your lights on so you can clearly see what needs to be adjusted.(try up against a wall or on the road so you can adjust both for right depth and angle.

There should be 2 screws top of each headlight. look for a hole that leads to a jagged ridge on side of screws which you should be able to insert a phillips screwdriver into and just twist it.

If I remember correctly the screw closest to grill does verticle and outside one does horizontal (im pretty sure its correct)

I had to adjust my horizontal before my verticles started moving.

Just play around with it and you should see it move.

Took me 1 whole week (about 30 mins everynight) to get it in the right direction.

AND DONT FORGET A TORCH!

goodluck:thumbsup: