dc2r standard ride height

[Jomsy]

Can some one grab a tape measure and tell me the distance from the ground to the middle of the wheel arch, and the centre of the hub to the wheel arch
for front and rear

on a standard dc2r

[Chuckz]

i want to know too

[dc2itr]

from what I can see on the specs manual, should be about 600mm.

if it helps. the dc2r is lowered 15mm from dc2. producing 30% less lift & 1% less drag.

[G_Vtec]

i current have dc5r rims on my dc2r with 205/45 profile tyres. From the ground to the top arc measures 24inch for the fronts and 25inch for the rears. This is with stock suspensions and its a little too high for my liking. Base on experience, most cars would perform better with 13inch all round from the wheel centre to the top arc. That's why Im getting adjustable shocks :)

[T-onedc2]

Ok I've got vtir with type r suspension and the measurements from ground to centre of arch are:
(f) 610mm (r) 625mm

side note: front right is 5mm higher to allow for driver weight.

Not just a suspicion either, "Best Motoring Type R Legend" mentioned this also.