PDA

View Full Version : RSM wiring



180sx
23-03-2007, 11:40 PM
anyone have the wiring diagram for the RSM? or can anyone tell me how to connect it to my ecu ? it has a plug at the end of the wiring

Eclipsor
24-03-2007, 12:50 AM
If it has a plug at the end then you are probably missing the 2nd half of the wiring loom. Did you buy it 2nd hand?

You can get the wiring diagrams off the apexi site. However if you don't have the other half then you'll probably need to cut off the plug and extend the wires so you can splice into the ecu loom.

ECU-MAN
25-03-2007, 12:22 PM
red= ign 12v
black = ground
yellow = ICM
purple = VSS signal

EG5[KRT]
25-03-2007, 09:44 PM
vss = vehicle speed sensor

wat is ICM ? ?

Eclipsor
25-03-2007, 10:58 PM
Ignition Control Module? Should supply the rpm signal (I think).

ECU-MAN
26-03-2007, 09:18 AM
yes ignition RPM signal