PDA

View Full Version : me and my accord



shenlong531
26-03-2007, 05:01 PM
Hey all, names Anthony, not really new to these forums, but very new to posting in forums... :P well i currently drive a CD5, only a couple of exterior mods at this stage, unsure what i wanna do next atm. thought i'd finally make a post to get sum feedback, cheers :thumbsup:

http://img241.imageshack.us/img241/5799/exterior11yj7.jpg

http://img182.imageshack.us/img182/7007/exterior7wv9.jpg

tRipitaka
26-03-2007, 05:40 PM
hi Anthony.

your car looks good.. love the purple..

hope you enjoy your stay :)

SiReal
26-03-2007, 05:45 PM
nice car. ur in melbourne as well. we got a few accord guys in melbourne. but ALOT of blardy euros. car looks good.

what are u lowered on? its practical

shenlong531
26-03-2007, 08:23 PM
thanks for the comments, its lowered on low king springs, and yeh it is pretty practical, but still suffer from the occasional scrapes by being careless..hehe

Joeyboy
27-03-2007, 02:33 PM
hiya shenlong531, nice cd5. i've got one too but the earlier version (95). its good to know u got good taste, hehe. i like the look of your grill, without the mesh (right??).

what else r u planning to do wid it?

STTICH
27-03-2007, 03:09 PM
welcome welcome :)

shenlong531
27-03-2007, 07:31 PM
hiya shenlong531, nice cd5. i've got one too but the earlier version (95). its good to know u got good taste, hehe. i like the look of your grill, without the mesh (right??).

what else r u planning to do wid it?

thnx dude, grill does have mesh, black mesh though cant realli see it in the photos, it was the stock grill..until i used a hacksaw .. :D needs fixing up though....future plans...no idea....see what happens i guess...any suggestions?? :P

Joeyboy
27-03-2007, 08:20 PM
thnx dude, grill does have mesh, black mesh though cant realli see it in the photos, it was the stock grill..until i used a hacksaw .. :D needs fixing up though....future plans...no idea....see what happens i guess...any suggestions?? :P

hmmm....muffler like the one below (but with titanium tips)

http://cgi.ebay.com/ebaymotors/3-DTM-Style-Dual-Muffler-Accord-Lancer-Altima-Jetta-TL_W0QQitemZ270104020489QQcategoryZ33636QQrdZ1QQcm dZViewItem

and also maybe side m3 gen2 side mirrors wid blinkers as per below (but DONT BUY from US as might have a problem coz they're on LHD - talking from experience, hehehe).

http://cgi.ebay.com/ebaymotors/94-97-HONDA-ACCORD-2-4DR-JDM-M3-LED-SIDE-MIRRORS-95-96_W0QQitemZ180098920960QQcategoryZ33649QQrdZ1QQcm dZViewItem

new headlights - u could get the twin halos but from experience the halos tend to die after a while. im getting the one below. u could get ones with the amber sides too.

http://cgi.ebay.com/ebaymotors/JDM-HEADLIGHTS-CORNERS-FOR-94-95-96-97-HONDA-ACCORD_W0QQitemZ290098868020QQcategoryZ33710QQrdZ1 QQcmdZViewItem

what about tails?
http://cgi.ebay.com/ebaymotors/96-97-HONDA-ACCORD-JDM-BLACK-EURO-TAILLIGHTS-TAILLIGHT_W0QQitemZ180100233116QQcategoryZ33716QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem

shenlong531
27-03-2007, 08:52 PM
thanks joeyboy for the list :P well i'll be looking at mufflers this week or next, and i have previously looked for black jdm styled headlights, but haven't found a decent pair, should raid the junk yards again, found one once but din buy it.. should of though as for rear lights..no plans..alreadi "slighltly" changed rear lights...(ripped out the orange amber bit) but yeh we'll see how it all goes :thumbsup:

Sensei
27-03-2007, 10:52 PM
Hi Anthony,
I like your CD5, very tastefully done with an understated look.

ZC_CRX
27-03-2007, 11:43 PM
Looks clean man is it lowered on lows or super lows cause i have one 2 but the 94 model and i got defected for being too low so i had to but my stock springs back in so i have a set of koni reds lookin for a set of springs that will lower me but nt as much as i was. I had custom kamacs in her before. if i could go up an inch in the front that would be perfect.


http://i15.photobucket.com/albums/a365/cord_94/zP1010156.jpg
http://www.ozhonda.com/forum/%5BIMG%5Dhttp://i15.photobucket.com/albums/a365/cord_94/zP1010162.jpg%5B/IMG%5D

shenlong531
28-03-2007, 06:35 PM
yeah ur ride looks pretty low :P atm im riding on lows...i would like it lower..but it'll become too much of an inconvinience..so yeh

mrwillz
29-03-2007, 12:47 AM
dats not a stock color is it

clean az
debadged

shenlong531
29-03-2007, 04:09 PM
dats not a stock color is it

clean az
debadged

acctually yeh it is stock colour, but yeh many ppl do ask if its stock colour or not :) guess thats a good thing? lol

94_Accord
29-03-2007, 06:34 PM
Looks clean man is it lowered on lows or super lows cause i have one 2 but the 94 model and i got defected for being too low so i had to but my stock springs back in so i have a set of koni reds lookin for a set of springs that will lower me but nt as much as i was. I had custom kamacs in her before. if i could go up an inch in the front that would be perfect.


http://i15.photobucket.com/albums/a365/cord_94/zP1010156.jpg
http://www.ozhonda.com/forum/%5BIMG%5Dhttp://i15.photobucket.com/albums/a365/cord_94/zP1010162.jpg%5B/IMG%5D

yeh bro i got recently defected aswell, and they did it from the bak and it cleared but the front was just too low.. i got done at approx 95 mm. im guessin thats the sag coz it was street legal wen i had em done

zedevan
31-03-2007, 05:34 PM
very sexy, u gonna put mesh in the holes of ur rear skirt?

can't wait to c it in person tonight ;)