EJ rear trailing arm bush size

[twing]

Hi guys,

I need new trailing arm bush. Thinking o2f getting nolathane's.
Their product catalogue has 2 sizes.
part no 46279 with OD shell 80mm.
part no 46280 with OD shell 85mm.
Which one is for EJ?

Thanks for the help..

[destrukshn]

measure your one?

[ekhybrid]

LOL wat he said

[twing]

haven't measured mine... lazy to get under the car.
hope that someone might already know.

[e240]

Hi guys,

I need new trailing arm bush. Thinking o2f getting nolathane's.
Their product catalogue has 2 sizes.
part no 46279 with OD shell 80mm.
part no 46280 with OD shell 85mm.
Which one is for EJ?

Thanks for the help..

Why don't you just give them a call? They will probably already know what you need. :o

[twing]

I've asked autobarn.. and they know nothing.
I guess I will try calling nolathane directly.

[90xsi]

there were 2 different sizes used in production

you will have to measure up your original ones

or buy both and return the one that you dont use.

[twing]

Called nolathane and they told me to get down and measure it :(...


there were 2 different sizes used in production
you will have to measure up your original ones
or buy both and return the one that you dont use.

Does that mean my EJ may use different size from other EJs?
Understand if my EJ will use different size from EG.

[90xsi]

yeap they both used different sizes

eg used different sizes as well, think it was 80 and 85mm
as well cant remember.

just jack up your rear wheel, remove it, then measure the
bush, pretty dam easy. use a vernier if you have one to get
more of a accurate size.

[twing]

I like Noltec's website. http://www.noltecsuspension.com/popproduct.php?id=N61508&vhcid=825&brand=Honda&series=CIVIC+%26+CRX+EJ+%26+EK+Series++++96-00

click on the the brochure and they say 80mm is for EJ.
85 mm is for tegs. Nolathane should know that too. X(