J's racing intake [EK4]

[vti_ek9]

hi i've recently purchased a j's racing intake for my EK4.

the intake doesn't come with a hole for the sensor..

any ideas on how i go about this.. the nozzle on the intake is pretty much moulded into the cf and i don't think it can be removed.

thanks in advance.

[ekhybrid]

u can take the rubber thing out but leave it
attach you intake temp sensor to the hole
and buy ur self a breather filter to fit to the valve cover.

[ekhybrid]

oh let us know how the intake goes after u fit it

[Limbo]

It should have a rubber hole with a plastic plug in it when you get it. You need to take out the plastic plug

[vti_ek9]

No. It has one nozzle for the valve cover, and it's moulded into the cf.

What i actually did was drilled another hole for the sensor. Anyone that has a j's racing intake.. Just note to be very careful with the drill and drill slowly.

Here's a pic.

[[ricer]]

yea easy, now just buy a grommet and plug ur sensor in

[ekhybrid]

lol
why didnt you take out that silver tube and stick the sensor in there and use a $10 breather filter

[vti_ek9]

err because its moulded into the cf??

[ekhybrid]

ROFL ok mate....
http://i86.photobucket.com/albums/k91/hondaek4/DSC00472.jpg

[kn1ghtm4r3]

should of gotten a cai =D
hidden away and all holes included

should of just done wat hybrid did

[ekhybrid]

should of just done wat hybrid did

i dont even know why he started this thread if he was gonna DRILL it