Header and brake options.

[Jarkz]

I have finally fitted my H22a into my EG over the weekend, its Not going yet but its in. I highly recommend HCP Engineering mounts for this conversion as fitting is a breeze with the supplied instructions. Anyway I have a huge space between the radiator and the block for a nice set of headers, What options do I have for my EG? Will Aftermarket header for a Prelude like DC sports, Skunk2 etc fit?

Also... what brake upgrade options do I have?

[XB-16-AX]

brake options possibly = Civic/Integra VTiR or EG SiR complete front brakes/rotors/calipers/hubs etc - this will depend on what type of EG civic u have e.g. EG Si = 240mm, EG VTi = 262mm.

Or you might want to use Prelude brakes etc - just depends on how much u want to spend and how big in the diameter size of the rotors/calipers.

Headers - if the prelude skunk2 or DC Sports are MADE for the preludes H22A then yes it will fit - why not get TODA or XFORCE ...really depends on your choice and preferrences.

you have plenty of options as much as plenty of researches available in Ozhonda or mr Google!!

just type and click search! :p

[Jarkz]

Thanks for the brake info XB-16-AX...

[Samo]

EG Si = 242mm
Eg vti = 242mm (not 262mm)

dc2 vtir/sir = 262mm
eg6 = 262mm

or do this
http://www.ozhonda.com/forum/showthread.php?t=61745

[XB-16-AX]

EG Si = 242mm
Eg vti = 242mm (not 262mm)

dc2 vtir/sir = 262mm
eg6 = 262mm

or do this
http://www.ozhonda.com/forum/showthread.php?t=61745

hmmm according to DBA.com.au 2007 catalog,

91-94 EG GL,GLi,VEi, SEdan = 240mm
91-95 EG 1.6L VTEC VTi = 262mm

99-00 Si = 262mm

so he's civic would be in the top line right?

weird...stuff :)

[Benson]

the EG6 has 262mm rotors...

vti,si,gli,gl has 240mm rotors

[Samo]

the EG6 has 262mm rotors...

vti,si,gli,gl has 240mm rotors


:thumbsup: :thumbsup:

[EG5]

brake options possibly = Civic/Integra VTiR or EG SiR complete front brakes/rotors/calipers/hubs etc - this will depend on what type of EG civic u have e.g. EG Si = 240mm, EG VTi = 262mm.

Or you might want to use Prelude brakes etc - just depends on how much u want to spend and how big in the diameter size of the rotors/calipers.

Headers - if the prelude skunk2 or DC Sports are MADE for the preludes H22A then yes it will fit - why not get TODA or XFORCE ...really depends on your choice and preferrences.

you have plenty of options as much as plenty of researches available in Ozhonda or mr Google!!

just type and click search! :p

Toda dont make headers for h22a

[m3ntAL_l2]

EG Si = 242mm
Eg vti = 242mm (not 262mm)

dc2 vtir/sir = 262mm
eg6 = 262mm

or do this
http://www.ozhonda.com/forum/showthread.php?t=61745

is dc4 same as dc2? 262mm front rotor???

[SLOWEGG]

Yes it is.

[PaZzMaN-R]

spoon breaks, wilwood, ap racing, brembo to name a few. otherwise integra type r break would be good!

whats your purpose for the car? daily driver drag machine or track? it will also help people to offer better opinions

[aimre]

spoon breaks, wilwood, ap racing, brembo to name a few. otherwise integra type r break would be good!

whats your purpose for the car? daily driver drag machine or track? it will also help people to offer better opinions

type R same as a prelude VTIR i read. Prolly cheaper buy VTIR brakes than type R brakes from a wreckers

[m3ntAL_l2]

dont mean to hijack the thread but cbf starting a new one.
is da9 the same as dc4? both 262mm front rotor?