Spoon FD Civic bumping cornering

[artistic]

weird movement

http://www.youtube.com/watch?v=ReC1zUGSsX4

[gerard]

In the old days, I would have thought axle tramp

[aaronng]

Damper setting was probably for a JGTC track, but not properly adjusted for Tsukuba.

[PaZzMaN-R]

weird handling there:S

[black_jazzato]

Spoon might have to re-adjust rear damper to suit with tsukaba but in didnt happen with Spoon FD street version as you can see from the link below. It look very stable for Street version.

http://www.youtube.com/watch?v=Hit17uZP6pc :thumbsup:

[[[d a n n y]]]

Damper setting was probably for a JGTC track, but not properly adjusted for Tsukuba.

i sorta disagree u might be right but.
i recon the FD chassis is still relatively new so it was a test bed..(IMO)
definately spoon will put more R&D into the new CTR but damn that cars still bounces all over the place

[VT3C]

if you were runnong 20/18 KG/mm springs YOU'd be bouncing allover the place too if you were driving that hard ;)

[black_jazzato]

if you were runnong 20/18 KG/mm springs YOU'd be bouncing allover the place too if you were driving that hard ;)

Kind of understand what you talking about. Thanks!

By the way, Nice pic with Mr.Ichishima!! Damn jealous!! cause I'm a big fan of Spoon :thumbsup:

[VT3C]

hahahaha.. well the standard issue springs on spoon full-spec coilovers are 20kg/mm front and 18kg/mm rears.. your stock springs are ~3-5kg/mm... that's VERY hard.

thanks Ichisima-san says "Hi" hahaha.. got more than a photo when i was there ;)

[xenfacta]

thanks Ichisima-san says "Hi" hahaha.. got more than a photo when i was there ;)

happy ending?