apexi SAFC II vtec controller, HElP bad!!!

[xxxtd]

hi all,

Here's the story, when u take ur apexi SAFC II off, I mean take all the wires out and all, when you put it back, do have to get it tune ? coz my cars runs fine but sometime the engine light turns on.

I dont have the apexi SAFC II TECHNICAL DOCUMENTATION and i cant download it at the site no more coz they have the new one. Is there a way to restart the apexi SAFC II setting so its runs stock?

Anyone know y ? plz help

[D4rk4n63l]

where did u try to find the manual? I found one here (http://www.apexi-usa.com/pdfInstallation/15.pdf)

page 60 tells u about factory reset...

[xxxtd]

Thank for the help, but i have restarted back too stock, but when i drive sometime the light still turns on, when i turns the car off then the light will stay till, like when the car cbf the light just turns on, y ??? help!!!

[[ricer]]

http://www.ozhonda.com/forum/showthread.php?t=8218
try this out

[Professional]

You got wrong connection. Did you install it?

[aaronng]

Have you checked if your O2 sensor is connected properly?

[xxxtd]

nope i didnt install it, O2, l'll try its 2moro thank man.

[aStRooo]

the unit has memory. won't require a retune. to be safe just write down all the numbers, and input them again if the memory is cleared.

[fatboyz39]

check all sensors. If engine light is coming on, a sensor is faulty or the ECU is not picking up the signal. I would check the wiring.

[040501912]

btw .. SAFCII is not vtec controller
VAFCII is..

loose wires, or incorrect wirring? or even a faulty on the controller...