PDA

View Full Version : stock rev limit gen4/5 prelude vtir


majic777
10-04-2007, 03:53 PM
hey guys just a simple noob question for ya, just wondering what the stock rev cut out is on gen 4 and gen 5 prelude vtir's? i know they redline at around 7400 (correct me if i'm wrong) but just want to know when they cut out

thanks!
John
preludacris
10-04-2007, 04:17 PM
i take mine up to 8k
buzz_civic
11-04-2007, 05:00 PM
Mine is at 8K too (Gen 5)
dundas
13-04-2007, 08:12 PM
cuts out after 8000 doesn't it?
buzz_civic
23-04-2007, 08:27 PM
Mine didnt cut out, just jerked really bad, im sure if you messed around with ECU and stuff it wouldnt
Cartoon
25-04-2007, 06:53 PM
Mine didnt cut out, just jerked really bad, im sure if you messed around with ECU and stuff it wouldnt

thats the fuel cut/rev limit
FiniX
26-04-2007, 12:36 AM
mine cuts out on 8k aswell
Penguin King
07-09-2007, 09:53 AM
Tested it the another week, definitely 8K. Gen 4 Prelude.
La0styl3r
09-09-2007, 06:56 PM
yep. i think we're all the same..lol

8k gen 5.
kenny_
09-09-2007, 10:01 PM
mine cuts out at around at 7600k, jdm 4th gen.
FiniX
27-09-2007, 02:54 AM
8k for 5th gen!
Brash22
28-09-2007, 09:09 PM
The actual ECU cut is 7650RPM, except if you have a Type S, Sir Spec S or Euro R, in which case it's 8250RPM. The tacho on the dash isn't the most accurate piece of equipment in the car.
preludacris
28-09-2007, 11:14 PM
well at the engine its 7650, on the tacho, it always reads a lil higher apparently
robert112
02-10-2007, 08:09 AM
what about for auto?
dundas
16-10-2007, 10:16 PM
The actual ECU cut is 7650RPM, except if you have a Type S, Sir Spec S or Euro R, in which case it's 8250RPM. The tacho on the dash isn't the most accurate piece of equipment in the car.

Correct, i checked it out on my gauges hooked to the ECU :)
wow your soo smart :)