WSID 11/04/07 Drag results (ITR, EJ8 turbo, DC2)

[.::F[L]Y::.]

Headed out to WSID tonight with a couple of others (couped_up and ginganggooly)

Managed a best of 13.66 @ 100MPH 2.010 60ft on my third and last run.

1st run- 13.914 @99.97 MPH 2.151 60ft

2nd run- 13.842 @ 99.14 MPH 2.130 60ft

The car was a dc2r with just I/H/E + Dynodave tune :thumbsup:

I will let the others post up their times.


timeslip. *i was right lane

http://server2.uploadit.org/files/tekman-timeslip.JPG

[riceball]

i could run faster then that! lol. Great job, Maybe u can aim for 12 secs now

[sydteg21]

congra john , impressive time man

[zco]

3 cheers for the big man ! lol nice times john !

[fatboyz39]

i could run faster then that! lol. Great job, Maybe u can aim for 12 secs now

AHHAHHA no way 12's bro. Mayb with a blower but that might upset some ppl hehehe.;)

[EG5]

:thumbsup: nice timeslip from just I/H/E + ECU

[ginganggooly]

Yeah, very nice result boys... We need to get some drag slicks on there.

Mine was a little underwhelming 14.25x @ 96.xxMPH.
I'll put it down to me running out of talent :o

I managed two runs thanks to the rain, and i'm suddenly unable to launch- got two consecutive 2.2xx 60's. I'll go back again next week to try and improve on it, maybe if i drive the car around for a day i'll get back in the groove........

[luzinit]

nice time there, how was the car setup? any weight reduction, and coilovers/adjustable sussy and what tyres john?

[Couped Up]

Mine was shocking i got a 14.8 so cut sniff sniff alwells better luck next time i guess but yea good stuff john congrats.

[OB]

:thumbsup: who drove this time hehe.. great times.. good work!

[.::F[L]Y::.]

:thumbsup: who drove this time hehe.. great times.. good work!

i drove :p

Tony- I had the rear seats and passenger seat taken out. Car had coilovers and we were adjusting them after each run. Tyres were used A048's

[Q_ball]

Well done John :)

Johnny, better luck next time man - jst keep at it :)

[Astro]

fark me dead...thats a awesome time there John....congrates man...60ft was awesome too..

i have always wondered if my car would crack a 13 sec pass....might just have to go one day

[VTi_b0i]

Mine was shocking i got a 14.8 so cut sniff sniff alwells better luck next time i guess but yea good stuff john congrats.

ahh thats aiight.. always room to improve... i should be getting roughly same times as u but i didnt haha

[barefootbonzai]

Well done boys, real good job. Most don't understand what an achievment it really is. It's because these boys take action instead of sitting around and talking shit all day like 90% of people on here. Good WORK!!!

[Astro]

Well done boys, real good job. Most don't understand what an achievment it really is. It's because these boys take action instead of sitting around and talking shit all day like 90% of people on here. Good WORK!!!

hahahahahha :)

i think i do abit of both

[EKNR33]

Good work on the 13's FLY don't see many N/A Type-r's running 13's with ACTUAL time slips to prove.

So you removed:
-Passenger Seat
-Rear Seats

How about the spare tyres/tools and jack?

Also when you say Dynodave tune was that with a Hondata? or Apexi- Vafc?

[tRipitaka]

great times john..
must've been the dings+scratches from RNP that got you those times..

[fatboyz39]

Good work on the 13's FLY don't see many N/A Type-r's running 13's with ACTUAL time slips to prove.

So you removed:
-Passenger Seat
-Rear Seats

How about the spare tyres/tools and jack?

Also when you say Dynodave tune was that with a Hondata? or Apexi- Vafc?

Spare tyre out/tools out/jack out.....

Hondata s300 with DynoDave tune. We used the same map as in our Yellow Civic with b18c7 which did 13.6. We fine tune it of course to match the engine.

[Phamburger]

Congratz on the impressive time guys :)

You talk the talk and walk the walk :thumbsup:

Cheers

David

[grumpy rooster]

Well done. Great time for a bolt on B18 and tune.

Now I want to see 1 into the 12's. :)

[jdmTYPE R]

Mine was shocking i got a 14.8 so cut sniff sniff alwells better luck next time i guess but yea good stuff john congrats.

we will forgive u this time since it your first time with that setup

[GnJracing]

Awesome times for an unopened engine! Great 60 foot! What kind of rubber are you using?

[EKNR33]

Tony- I had the rear seats and passenger seat taken out. Car had coilovers and we were adjusting them after each run. Tyres were used A048's

From the above reply, looks like he was running Yokohama Advans A048 Semi Slick R-Compound tyres so very sticky and grippy. A lot better then normal street tyres for launches.

[Da1nONLY]

John...
Awesome time dude!!
loving the 60fter!!

one day you can show me to achieve such low 60ft..with my 17's ;)

[.::F[L]Y::.]

Thanks guys :)

Many thanks to Dynodave though for the tips on getting off the line better :thumbsup:

[fatboyz39]

From the above reply, looks like he was running Yokohama Advans A048 Semi Slick R-Compound tyres so very sticky and grippy. A lot better then normal street tyres for launches.

Sorry but your wrong about they bring sticky. They will be as good as good street tyres. We used them casue they were bald, good for burnouts ;).

With proper set of drag radial the times will drop.

[fatboyz39]

Now I want to see 1 into the 12's. :)

Very soon we hope. Working on new setups.:thumbsup:

[barefootbonzai]

Jimmy who you trying to fool. you know them tyres are better than most "street tyres". To be fair they're semi-slicks not really street tyres. The only better "street tyre" is BFG drag radials.

[todas**t]

r u guys sure its a unopen motor???? i dont beleive that

[OB]

r u guys sure its a unopen motor???? i dont beleive that

Why dont you believe that?

[barefootbonzai]

Why dont you believe that?

cause his got a fully built toda spec engine that doesn't run them times, lmao :)

[mr_vtec]

it hasnt been open TODAS**T...
good times boys i think its about time for me to run my car and dip into low 13s lol dont u think lol

[.::F[L]Y::.]

cause his got a fully built toda spec engine that doesn't run them times, lmao :)

hehehehe:thumbsup:

[Benson]

Jimmy who you trying to fool. you know them tyres are better than most "street tyres". To be fair they're semi-slicks not really street tyres. The only better "street tyre" is BFG drag radials.

True. Still street legal tyres LOL:thumbsup:

[Benson]

Yes motor is un-open, well it has been open for a rebuilt.

120kw atw = 100MPH:thumbsup:

[OB]

cause his got a fully built toda spec engine that doesn't run them times, lmao :)

oooooh *ouch*

[ALLMTR996]

Very soon we hope. Working on new setups.:thumbsup:
Just looked at your engine that DD has apart he said he is going to do some small mods and put it back together will this go in the DC2R to push you into the 12's or another project.And congrats to the whole family on your times you now have done it in 2 different cars both with the same mods very interesting and credit to everyone involved.
ALLMTR996

[luzinit]

Y::.;1130622']i drove :p

Tony- I had the rear seats and passenger seat taken out. Car had coilovers and we were adjusting them after each run. Tyres were used A048's

Sounds good, I just got my new clutch in, looking forward to having another crack.. see if i can get near zico's time hahaa

[BlitZ]

ahah family day out..
congrats on the great time.. damn man.. almost under 2sec on 60ft..

[BlitZ]

u boys running std final drive?

[barefootbonzai]

standard 4.785 ITR FD

[Benson]

standard 4.785 ITR FD

^^^^^^^

[locote]

The header used is a Dave header???

[fatboyz39]

The header used is a Dave header???

bingo:thumbsup:

[jdmTYPE R]

nice boys

[Jamezy]

nice time man :thumbsup:
hope i can get that time when i get those mods

[BlitZ]

its a serious peice of driving...

honeslty.. i dont think 98% of us can even get close to that time, even with a similiar setup.. beats opened motors...
the 60ft is better than most rwd's too:thumbsup::thumbsup::thumbsup:

[todas**t]

Why dont you believe that?
coz its hard for meto pull good time...

cause his got a fully built toda spec engine that doesn't run them times, lmao :)
thanks alot barefootbonzai tell every1 why dont u

[Benson]

There might be a .1 or .2 to squeeze from the type R... We just did this to prove a point that stock type R can actually run 13's with a budgeted bolt-ons. The bolt-ons we have on didnt cost much compare to well-known brands like mugen or spoon.

This just goes to show all those people out there with worked B-series or thinking of working there engine that a stock type R with bolt-ons can do the same times if not quicker down the 1/4 mile.

We have now prove this twice in two unopen b18c7 motor.. Once in our and EG and now in the Type R.

[ginganggooly]

Be nice to see your car run on slicks... you'd be scarily close to some of the mega $$ setups going around. Fark, you're already faster than most of them...

It's a credit to yourselves and mr dynodave that you've done this much with what you've had to work with. very, very good job...

[todas**t]

F**K that man im pissed

[.::F[L]Y::.]

yeh as Benny mentioned we could have squeezed another 0.1 ir maybe 0.2 off that time. Only had 3 runs and i was slightly altering the way i was getting off the line each time. and it seemed to be working. But overall fairly happy with the time :)

but although our type r managed to do this it doesnt neccesarily mean others with same mods would do it cause every car is different.

Also you wouldnt know if you dont go :P we need more of a honda presence at WSID meets.

[jdmTYPE R]

ill be back there soon as dave finish my motor

[bennjamin]

very interesting what simply just a ECU and a good long tune can warrant.
IMO , even without the bolt on mods you can reap power from a stock engine with a good tune.

[STOCK]

Good on you johnny for the d series represent.. ek100 will be with you shortly..

JOn.... ill have to be very very carefull if you pull along side me at the lights :o congrats again on the awesome time!

what time did you run christian in the eg sedan>?

[zco]

Good on you johnny for the d series represent.. ek100 will be with you shortly..

JOn.... ill have to be very very carefull if you pull along side me at the lights :o congrats again on the awesome time!

what time did you run christian in the eg sedan>?
is that you ?!?! HAHA you hoon ! i've seen it around a few times.. LOL or maybe it was EK001

[barefootbonzai]

what time did you run christian in the eg sedan>?

I remember a while back, he was telling me he should get at least a low 14 sec pass, since i got it with only a stock b16 and his got a b18c and all, lol. So how did you go yo!

[Teggy-Vtir]

impressive times on the typeR

well done to everyone else..

hehe im due to go back to wsid..
ill bring down 2 more turbo teggys ;)

[.::F[L]Y::.]

Good on you johnny for the d series represent.. ek100 will be with you shortly..

JOn.... ill have to be very very carefull if you pull along side me at the lights :o congrats again on the awesome time!

what time did you run christian in the eg sedan>?

hey Kevin,

have you completed your beast? should be good to see you guys out there again :thumbsup:

[STOCK]

Just about... just saving for a management upgrade and tune before the boost gets turned up (boost controller in just scared to turn it up untuned)

[fatboyz39]

Just about... just saving for a management upgrade and tune before the boost gets turned up (boost controller in just scared to turn it up untuned)

Hondata s300 :thumbsup::thumbsup::thumbsup::thumbsup:

[pwr2w8]

F**K that man im pissed

Why you pissed, because your toda engine was a rip off.

[zco]

Why you pissed, because your toda engine was a rip off.
pretty much. LOL

[Benson]

Stock ITR motor > poorly built worked motors :thumbsup:

[pwr2w8]

he payed for the name TODA, LOL

[jdmTYPE R]

Why you pissed, because your toda engine was a rip off.
now that funny man:p

Stock ITR motor > poorly built worked motors :thumbsup:
stop talking about your motor talk about your tyres coz they gave u the good 60ft hahahah i got to admit dave is doing a good job in helping u guys with your setup....hope he looks after me like he looks after u guys:D

[barefootbonzai]

cause dave is the man! willing to help all gansta's in need hahahaha.

pwr2w8 you're just a dick, that has no idea what we are talking about.

[pwr2w8]

cause dave is the man! willing to help all gansta's in need hahahaha.

pwr2w8 you're just a dick, that has no idea what we are talking about.

Yeh whatever, u think u know it all, that is why your car run the numbers, with all that engine work.

Are you also pissed like TODA --T is

[xtercii]

hahaha hectic times...
and barefoot is not pissed...

[DynoDave]

Yeh whatever, u think u know it all, that is why your car run the numbers, with all that engine work.


Hey ease up a bit there you are talking about a guy that has no background in the automotive industry but put his combination together better than 90% of the other shops in this industry can I think a bit of respect needs to be shown.
Regards Dyno Dave

[barefootbonzai]

hhaha yeah thanks guys.

My achievements talk for themselves. Anyone that acutally knows what their talking about would know.

[superR]

My achievements talk for themselves.
Actually, you kind of do all the talking.
One only needs to search your previous posts to see how hard you blow your own trumpet.
Further, you have a tendency to dish out shit to everyone, left right & centre.
It is funny though, when it comes back at you, you're ****ed for any thing to say.


Hey ease up a bit there you are talking about a guy that has no background in the automotive industry but put his combination together better than 90% of the other shops in this industry can I think a bit of respect needs to be shown.
Regards Dyno Dave

Maybe so, but it doesn’t give him licence to go on like a complete ****wit all the time.
So get off your high horse mate.

[.::F[L]Y::.]

geez this has turned into a shit fight quick smart

[todas**t]

here we go agian just thought it was over.....superR get over your love 1......atleast there cars have been proven to perform....

[DynoDave]

Actually, you kind of do all the talking.
One only needs to search your previous posts to see how hard you blow your own trumpet.
Further, you have a tendency to dish out shit to everyone, left right & centre.
It is funny though, when it comes back at you, you're ****ed for any thing to say.



Maybe so, but it doesn’t give him licence to go on like a complete ****wit all the time.
So get off your high horse mate.
Hey no one is perfect James people do make mistakes some more than others and some more frequent than others and some just all the time :p ,some people do blow there own horn as they are very proud as to what they have achieved with little help from the BIG name shops.This thread was started by a family that with very little help went out and ran a great time so I really think you all should show some respect to there achievments as many guys have tried with spending alot more on there NAME brand parts and setups that are slower then these guys,and for me it is a great pleasure to be part of there little group that goes out and enjoys there rides both on and off the track,and I dont really want to see this thread turned into another locked one because someone has issue's with other shops/people.
Regards Dyno Dave

[yfin]

Lets get back on the straight and narrow please - no name calling and personal attacks. Any more talk of people being "fwits, etc" will result in infractions being dished out and the thread locked.

[barefootbonzai]

Actually, you kind of do all the talking.
One only needs to search your previous posts to see how hard you blow your own trumpet.
Further, you have a tendency to dish out shit to everyone, left right & centre.
It is funny though, when it comes back at you, you're ****ed for any thing to say.


dude i remeber helping you out with some parts ages back and now you come and dish this shit? I can't help it that guys are cut just cause i promote my car well, that's their problem. And yep i'll speak my mind if some loser just comes out of no where and rubbish talks my car just like the pwr2w8 fag.

Guess we all have to pick who we stand by. You can join the haters list with pwr2w8.

[fatboyz39]

backyard performance FTW.....another 13 sec car ahhaahaha

[wynode]

Keep the chit-chat / attacks out of this thread thanks guys.

[.::F[L]Y::.]

Congrats on your great time. But everbody is missing the fact that your OVER one second RT got you beat by a SLOWER RUNNING CAR in the other lane. Time to work on your RT so you can beat those slower cars.:p

wasnt going for RT.

we had this discussion ages ago in a different thread..... ;)

[claymore]

Congrats on your great time. But everbody is missing the fact that your OVER one second RT got you beat by a SLOWER RUNNING CAR in the other lane. Time to work on your RT so you can beat those slower cars.:p

[joker]

wo wo wo, easy there, whats with all the violence in this world and in this thread? Lets all just shake hands and have group hugz n be friends again...LoL.

[ginganggooly]

Congrats on your great time. But everbody is missing the fact that your OVER one second RT got you beat by a SLOWER RUNNING CAR in the other lane. Time to work on your RT so you can beat those slower cars.:p

I think they're on the right track, work on getting everything consistant, then work on getting rt's down.

[BlitZ]

u bloody clowns.
barefoot likes announcing his mods as he is proud of the mods and related power figures... nothing wrong with that.. Wish there was more contributing memebers like that

not like those who have race engines built by team aguri who claim to be stock, but is only really faster than a d series... (not tareting anyone in specific ;))

[tRipitaka]

not like those who have race engines built by team aguri who claim to be stock, but is only really faster than a d series... (not tareting anyone in specific ;))

nothing wrong with super aguri :) i'm sure john can vouch for sato..

anyways, back on topic guys..
we're here to comment on the ITR/EJ8/DC2's times, not comment on other people's setups..

[phantom_civic]

nice time guys.
really skilled drivers.

:)

[jdmTYPE R]

wat happen to the EJ turbo his been so quiet.....

[integraboy22]

congra , great time

[bennjamin]

cool. Spam it up fellas :)

Closed due to no proper input of late.

The drag results have been discussed so there is no point this being open any longer.