my new setup B20VTEC!!!!!!

[jdmTYPE R]

ive been driving a b20vtec motor for a while now even in my itr and very impressed with the performance, but couple of things on the motor let me down. After talking to DYNODAVE about building another b20vtec we decided to go all out this time.We source out a b20 block with darton sleeve, standard crank balanced for hi revs with hi comp pistons,ealge rods,acl race bearing...headwork done by DYNODAVE cnc port and polish,we've gone oversize valve for the intake to get more air in...the head will put togther with titanium valves,titanium valve spring,titanium ratainers,toda C cam and cam gears:thumbsup: .we will be trying this set up with a elderbrock victor X manifold and then try it with Quads.....ARP head and main studs will be used to put them together.. gearbox build by bel garage running ats gears and FD with spoon lsd.:D here r some pictures of the motor...
ATS box
http://i11.photobucket.com/albums/a157/vilain/DC2R/261204-0002.jpg
Spoon lsd
http://i11.photobucket.com/albums/a157/vilain/DC2R/P41502741.jpg
Toda cams
http://i11.photobucket.com/albums/a157/vilain/DC2R/P4150288.jpg
Eagle rods
http://i11.photobucket.com/albums/a157/vilain/DC2R/P4150285.jpg
Elderbrock manifold
http://i11.photobucket.com/albums/a157/vilain/DC2R/P4150274.jpg
QUADS
http://i11.photobucket.com/albums/a157/vilain/EG%20TYPER/qsrquads.jpg
more picture will be up during the build..

[fatboyz39]

WOW ....will be a BEAST!

[barefootbonzai]

oh shit. go hard or go home baby!

[teh_mechanic]

give me a moment to stop drooling.
sounds like a well thought out build.good luck with it

[TODA AU]

Nice...:thumbsup:

[VTi_b0i]

fcuk me! i want to see this build pic by pic :p what sort of power u hoping for?

[STOCK]

this new builds going to interesting!
what went wrong with the other b20?

[maracer]

fcuk me! i want to see this build pic by pic :p what sort of power u hoping for?

Me Too:thumbsup:

[integraboy22]

wow, will go hard for sure

[.::F[L]Y::.]

you better let me test drive it! hehe

[phantom_civic]

Kiet man!
Nice......

[Perry]

Y::.;1134329']you better let me test drive it! hehe

shot gun x2

[Q_ball]

I'm no all motor expert, but i think thats a turbo ay Kiet..?

:p

[NeRV]

sounds awesome, keep this thread updated buddy :thumbsup:

[jdmTYPE R]

fcuk me! i want to see this build pic by pic :p what sort of power u hoping for?
yes ill be posting up pictures as it gets worked on,power figure not gonna say that yet but we do have some sort of and idea. will keep you guys updated...

I'm no all motor expert, but i think thats a turbo ay Kiet..?

:p
turbo?????ummmmm im not sure wat a turbo looks like :)just have to wait and see

[zco]

this new builds going to interesting!
what went wrong with the other b20?

think it was the tune kevin. something happened. but yeh.. long story.

[Edgeauto]

Sound like you should be able to blow that BULLSH*T FIGURE out the water:)

[jdmTYPE R]

Sound like you should be able to blow that BULLSH*T FIGURE out the water:)

if the combo is right with a good tune there will be no BULLSH*T figure :)

[Benson]

Who cares about power figures... there all just numbers.. Take it down the 1/4mile Kiet. :p Should do easy low 12's ey?

Edited**

[barefootbonzai]

Dude at least low 12's.

[Sexc86]

nice build looks promiseing mate

[jdmTYPE R]

Dude at least low 12's.
just to make barefoot happy thats my target anywhere in the 12s....benny u better have a set of tyres for me since u burnt out mine....:)

[barefootbonzai]

11.8@116mph FTW! ;)

[jdmTYPE R]

11.8@116mph FTW! ;)

any of you guy got a set of fullslicks???hahhah

[Edgeauto]

At least you guys have a decent strip to run on:(

[Sp00ny]

oOOooooOOo looks like im jelous, nice setup and of course DD has something to do with it XD.

Id like to see the torque figures of this beast, them toda cams look like they have very high lift in the non vtec range...

Nice Work!

[fatboyz39]

any of you guy got a set of fullslicks???hahhah

yes...13' ones :p

[jdmTYPE R]

oOOooooOOo looks like im jelous, nice setup and of course DD has something to do with it XD.

Id like to see the torque figures of this beast, them toda cams look like they have very high lift in the non vtec range...

Nice Work!
we will be trying other cams depends on the put of the toda cams.....


yes...13' ones :p
your useless man....they r no good to me:p

[Phamburger]

Kiet awesome work mate :).

I bags a seat in this car when u take her out! :).

Everything going to plan.

As someone told me recently IT WILL SMASH S*** all over the streets.

Cheers
Dave

[DynoDave]

Sound like you should be able to blow that BULLSH*T FIGURE out the water:)
I really dont care what power this build show's on the dyno I dont build dyno queen engines,all I am interested in is ET's and lap times, dyno's as you know are just a tuning tool.You all should know by now that its not just about building an engine that makes power you have to build a COMPLETE package to do the job required by the customer and 99% of the time they cant afford to do it and there built engine looks like a nugget because it was never finished off with the rest of the package it needs to show its full potential .
Regards Dyno Dave

[dupac->]

wow looks fun! :D

[sydteg21]

yo d**k, you will surely get more than 140kw, hahahahah :P

[Waggy]

Very nice! Can't wait to see the ET.

[.::F[L]Y::.]

LOL @ dyno queen engines :)

[fishman]

dyno queens are the coolest!

[jdmTYPE R]

:thumbsup:
yo d**k, you will surely get more than 140kw, hahahahah :P

im not really worried about the power figure i just wants the motor to rev up quick massive torque quick respose with the Gforce...:)and the SCREEMIN of the vtec:thumbsup:

[xtercii]

how high you gonna rev the motor?

[Hipowerracing]

sweet.. another b20.. let kicks those k20s (got nothing against k20 love them too) lol..

good luck with engine build.. spent the money it's worth every penny when you do the times..

just my advice.. with your FD get one that suits the car. 4.9 final drive is not always the best for a b20. with my car i found that it actually ran better times with a 4.2 (4.9 you will just be frying your tyres with more hp.)

[barefootbonzai]

you got 4.2FD in your crx atm ivan?

[flipstar]

how much did it cost 4 u 2 get ur gearbox built

[jdmTYPE R]

sweet.. another b20.. let kicks those k20s (got nothing against k20 love them too) lol..

good luck with engine build.. spent the money it's worth every penny when you do the times..

just my advice.. with your FD get one that suits the car. 4.9 final drive is not always the best for a b20. with my car i found that it actually ran better times with a 4.2 (4.9 you will just be frying your tyres with more hp.)

off the line will get alot of wheel spin but how quick its takes off is amazin.but on the track it drive really well it just hit rev limiter so quick u dont have time to change gears....ive been in a car with the same box as i have...

[jdmTYPE R]

how high you gonna rev the motor?
until power drops.......:) i dont know yet man higher the bettter:thumbsup:

[jdmTYPE R]

how much did it cost 4 u 2 get ur gearbox built
parts is about 3500+ not including labour yet i got the gears and FD changed to ats

[ZeForce]

:thumbsup:

im not really worried about the power figure i just wants the motor to rev up quick massive torque quick respose with the Gforce...:)and the SCREEMIN of the vtec:thumbsup:

What more does a man need in life? :thumbsup:

[jdmTYPE R]

What more does a man need in life? :thumbsup:
a woman that screams like vtec while u giving them full throttle hahahhaha:D

[ZeForce]

I stand corrected....

[yourfather]

will be watching intently.

might do a B20 when my B18C2 dies

[EG CIVIC]

Awesome!! :thumbsup: :thumbsup:

[fatboyz39]

Put up a the cost involve in this build dude. More PICS!!!

[jdmTYPE R]

i rather not post up the cost wanna keep it personal,let just say it already costing me alot...i need to pay dave a visit to take more photos.

[todaek9]

Because everything in Aust is too expensive, thats why no one can afford to finish everything, and even though customers do flock out that kinda money, i don't really think that the "build engine" will be as expected - the only good engine will be their own show car...


I really dont care what power this build show's on the dyno I dont build dyno queen engines,all I am interested in is ET's and lap times, dyno's as you know are just a tuning tool.You all should know by now that its not just about building an engine that makes power you have to build a COMPLETE package to do the job required by the customer and 99% of the time they cant afford to do it and there built engine looks like a nugget because it was never finished off with the rest of the package it needs to show its full potential .
Regards Dyno Dave

[sydteg21]

:thumbsup:

im not really worried about the power figure i just wants the motor to rev up quick massive torque quick respose with the Gforce...:)and the SCREEMIN of the vtec:thumbsup:

u definately will get that man :thumbsup:

[Hipowerracing]

you got 4.2FD in your crx atm ivan?

duiy..

got 4.4 for track days and got 4.2 for drag days. i think even 4.4 is too close for QR although rob gets 1 sec faster he is actually shifting thru corners 3 and 4 in QR which is actyally slowing him down.:thumbdwn:

[ginganggooly]

Because everything in Aust is too expensive, thats why no one can afford to finish everything, and even though customers do flock out that kinda money, i don't really think that the "build engine" will be as expected - the only good engine will be their own show car...

Unless you do everything yourself, modifying cars is an expensive hobby. No matter where you're from.

[barefootbonzai]

i don't really think that the "build engine" will be as expected - the only good engine will be their own show car...


You meant built engine right. Yes it's true there is heaps of "built engines" that don't perform. Probably has something to do with the complete setup or combination of parts which most of the guys have been saying all along.

Guess we just have to wait to see how this one goes.

[DynoDave]

Because everything in Aust is too expensive, thats why no one can afford to finish everything, and even though customers do flock out that kinda money, i don't really think that the "build engine" will be as expected - the only good engine will be their own show car...
Yeah what ever and what show car are you talking about ?.
Regards Dyno Dave

[hinezz]

looks like this will be a interesting build..gudluck wit the project..

[ginganggooly]

Yeah what ever and what show car are you talking about ?.
Regards Dyno Dave

Must be the diesel vtec Jackaroo.

[yourfather]

no, its the biturbo supercharged diesel lada niva

[ginganggooly]

no, its the biturbo supercharged diesel lada niva


http://www.parque4x4.com.ar/lada/raros/niva6.jpg

[yourfather]

thats the one

[jdmTYPE R]

Because everything in Aust is too expensive, thats why no one can afford to finish everything, and even though customers do flock out that kinda money, i don't really think that the "build engine" will be as expected - the only good engine will be their own show car...
how do u know wat its expecting??? we dont even know wat we gonna expect...we do race our cars,what show car u talking about????

[tinkerbell]

you win the lotto mate?

pretty much my dream build right there :D

[tinkerbell]

will be watching intently.

might do a B20 when my B18C2 dies

take it to race at wakefeild in summer with no oil cooler and semi-slicks ;)

[jdmTYPE R]

you win the lotto mate?

pretty much my dream build right there :D

nah man ive been working on this motor for a while now getting all the parts together now that i got it all... we slapping it together now..:)

[EG5]

Nice b20 build :thumbsup:

[pornstar]

take it to race at wakefeild in summer with no oil cooler and semi-slicks ;)

trying to give him bearing failure? lol, nah gotta be low on oil to do something stupid like that :(

[dupac->]

rough ball park..
howmuch for something like this?

APPROXIMATE

just curious.. or even for anyone who HAS done something simliar?

[DynoDave]

rough ball park..
howmuch for something like this?

APPROXIMATE

just curious.. or even for anyone who HAS done something simliar?
A basic B20Vtec will cost around 5-6k but at this level if your paying someone ;) to build it for you and supply parts we have quoted N/A engine/gearbox combinations that go over 30k.The one thing I have seen in the past is guys start a build like this and then workout what it really is going to cost and never finish it correctly and then just complain how there built engine is a nugget,but even with the best parts money can buy in them does not always mean big power outputs its all about the combination of parts and gearing used.
Regards Dyno Dave

[Hipowerracing]

A basic B20Vtec will cost around 5-6k but at this level if your paying someone ;) to build it for you and supply parts we have quoted N/A engine/gearbox combinations that go over 30k.The one thing I have seen in the past is guys start a build like this and then workout what it really is going to cost and never finish it correctly and then just complain how there built engine is a nugget,but even with the best parts money can buy in them does not always mean big power outputs its all about the combination of parts and gearing used.
Regards Dyno Dave

HI D.D.
we know you can build awesome engines.
not to be rude but for 30k why dont you guys buy a complete jun engine or a b22 ss works engine?
maybe a thought worth considerring??
i can definatly help you guys out on that..

Warmest regards

[grumpy rooster]

I think what Dave is saying that with all the ancillaries to go with the engine your looking at a package of $30k. Its quite easy to build a "cheap" engine. Its all the stuff you need to go with it that blows out the cost. Likewise, anyone can build a "cheap" engine that makes power for 2 min before shitting itself, its building it reliably that costs the $$$$.

[DynoDave]

HI D.D.
we know you can build awesome engines.
not to be rude but for 30k why dont you guys buy a complete jun engine or a b22 ss works engine?
maybe a thought worth considerring??
i can definatly help you guys out on that..

Warmest regards
As I said they where quotes the jobs never went ahead because these guys think is easy to build a big HP engine for 10k.Thanks for the offer but I have never been one to buy engines from oversea's I like to do everything myself but I think guys are starting to know now that the JAP name brand engines are working out very well for the people buying and using them.
Regards Dyno Dave

[bennjamin]

hmm. For anyone else's perspective. The B20 combo seen as a "cheap VTEC" with torque. Now it seems like its as expensive as any other to run properly lol

[DynoDave]

hmm. For anyone else's perspective. The B20 combo seen as a "cheap VTEC" with torque. Now it seems like its as expensive as any other to run properly lol
Like the one I just built for 5-6k they are a cheap package but with any engine once you start to really want power it does cost alot of money.The one that Ginganggooly has forsale is now fitted in a CRX and will be tested to the extreme's to see how far it can be pushed so far it looks very good and I just want to see what power it will make to compare it to a ITR B18c engine as they are getting harder to get and we need to start looking around for other types of engines to do conversions with.
Regards Dyno Dave

[ginganggooly]

hmm. For anyone else's perspective. The B20 combo seen as a "cheap VTEC" with torque. Now it seems like its as expensive as any other to run properly lol

It's the law of diminishing returns dude... When you want more power, you need to outlay disproportionately larger sums of money. Machining, bolt-ons internals, balancing, it all costs money...

[jdmTYPE R]

HI D.D.
we know you can build awesome engines.
not to be rude but for 30k why dont you guys buy a complete jun engine or a b22 ss works engine?
maybe a thought worth considerring??
i can definatly help you guys out on that..

Warmest regards

not aiming this at u, but my mate had a bad experienced on buying a complete motor from a known company oversea (NEW) claming to have all this job done and parts inside it but after opening it he didnt get wat he got invoiced for... so this way atleast i know wat im getting and can see how it is done :)

[jdmTYPE R]

hmm. For anyone else's perspective. The B20 combo seen as a "cheap VTEC" with torque. Now it seems like its as expensive as any other to run properly lol
any thing to do with cars is expensive:).ive seen some engines built didnt perform the way it should..from my experience the b20 works really well just wanted to be stronger.but like dave said all the power is from the head...

[DLO01]

Good luck with everything man. Looks tops!!! :thumbsup:

[Hipowerracing]

it's really good...
when i first started putting the b20 in my car everyone was so negative about the engine..
and now everyone wants one... lol..

like i said a b20 is very powerful if built right.

[tinkerbell]

it's really good...
when i first started putting the b20 in my car everyone was so negative .

lol? how long ago was that?

[Hipowerracing]

lol? how long ago was that?

last august...

[bennjamin]

last august...

...mind you , alot of members here change opinions like the wind.

IVe known of Tinkerbells B20 motor in 2 cars going thru a few transistions - hasnt let him down sofar.

[tinkerbell]

yes, the first one was built in October 2002, was in my 83 Prelude first, then went into my 91 Integra, then was sold and put in a 88 CRX, and is now in a 1991 Integra... and is still being thrashed...

[jdmTYPE R]

man its all internet talking about b20s they dont experience for them self to know how good they r...my old b20 setup is in another car now only thing let me down was the tune...

[bennjamin]

and , for everyones info - your "build" mainly consisted of replaceing the connecting bolts for the rods and what else ?
What $ tag ontop ?
Was it essentially a LS vtec conversion , but on a larger block ?

[barefootbonzai]

only thing let me down was the tune...

this might have been my mates problem too... he also did an all out b20 build about 2 years back...

[serpo]

HOLY MOLY! thats insane dude

[tinkerbell]

i think a few "fully built" B20VTECs may have been let down by the builder...

in most cases, when people sought my advice, it really seemed like the engien had been slapped together, without much thought for combination...

or let down with poor machining quality...

or just poor tuning...

B20's have had a bad name, basically since kids in the USA were 'slappin them together' with no tuning and then breakign them....

immediatly they get seen a "weak" due to this...

B20's are only weak when the builder is compromised or the tune is compromised...

it doesnt take a genius to realise that rod bolts that were first used in 1978 Civic 1.2l engines wont cut it for 120kW+ engines going to 8500rpm...

[fatboyz39]

Post pics of the head!

[barefootbonzai]

yeah pics of head is always good. videos are better though hahhaha.

[yourfather]

whered u get your CRV block from anyway

[yourfather]

Thanks tinkerbell, caught that.

UM ~ I think that kinda money for my daily driver isn't really going to be needed. Seeing as I don't think he'll be seeing the track more than once or twice a year once he is built.

[tinkerbell]

yeah, got confused with Darton sleeves and Dart block... lol!

but still, Darton sleeves also mean it is not a true "CRV block"...

[yourfather]

well, the metal casing is, but not the cylinder right

[pornstar]

careful luc, theres 2 common terms for dart blocks, so it can be abit confusing.

1) using darton sleeves, they bore out and resleeve your honda block with darton sleeves

2) there is an actualy dart block that is made in a dart mould which comes with the stronger sleeve from the "dart factory"

hope that helps ya mate

[yourfather]

cheers man, just...

looking into things...
doing research I guess.

[pornstar]

nps mate :)

I'll disagree on the b20 being a nice engine to turbo, however, for Na they are good if done correctly

[jdmTYPE R]

Post pics of the head!

yeah pics of head is always good. videos are better though hahhaha.

well tell dave to hurry up:) nah i dont wanna rush him want the job done perfect, soon as i got time ill go down and take photo of the parts,or jimmy u can take photo for me:).

[dupac->]

yeah pics of head is always good. videos are better though hahhaha.


LOL!!

Jdm type R- thats big bucks right there.. hope it goes all well and good! have with it and good luck! :thumbsup:

[jdmTYPE R]

LOL!!

Jdm type R- thats big bucks right there.. hope it goes all well and good! have with it and good luck! :thumbsup:
its under good hand since dynodave is working on it, he if a fussy person to deal with...but in a good way:) we just waiting on the block and head back from the machine shop.. soon as that comes back more pictures will be up...

[BlitZ]

hey kit,
how the hell u gonna run Quads and turbo? quad turbo setup?

[yourfather]

no hes gonna do a W16 B20 VTEC program with quad turbo

[jdmTYPE R]

hey kit,
how the hell u gonna run Quads and turbo? quad turbo setup?

hey dan hahaha:)
its a NA setup man...i never mention turbo :D

[zco]

hey kit,
how the hell u gonna run Quads and turbo? quad turbo setup?


it is possible to run quad throttle and turbo.. dont hte GTiR have em ? enclose the ITB's into a box and feed the cooler piping to it..

[dupac->]

lmao *shrugs* but its hilarious.

[.::F[L]Y::.]

another car which runs the ITB's+turbo setup is the autosalon drift car.

[DynoDave]

A couple more days and I will get some pic's up of the block and the head before and after reporting.
Regards Dyno Dave

[Phamburger]

Can't wait for this beast to be unleash onto sydney streets :p .

Be a weapon on and off the track.

I've subscribed to this thread.

[jdmTYPE R]

A couple more days and I will get some pic's up of the block and the head before and after reporting.
Regards Dyno Dave

sweet even tho it my setup i havent seen the engine yet just been busy..yeh i cant wait to see it to..

[slipn]

Would love to see more pics!!

[pwr2w8]

A couple more days and I will get some pic's up of the block and the head before and after reporting.
Regards Dyno Dave

Hey Dave

What would be the highest compression you will go on a B20 VTEC with our pump fuel.

[DynoDave]

Hey Dave

What would be the highest compression you will go on a B20 VTEC with our pump fuel.
It just depends on what the engine is going to be used for and what the rest of the combination would be, weight of the car and gear ratio's all this would make a difference,I know this is not the answer you are looking for but not a question I can answer without knowing alot more info.
Regards Dyno Dave

[pwr2w8]

It just depends on what the engine is going to be used for and what the rest of the combination would be, weight of the car and gear ratio's all this would make a difference,I know this is not the answer you are looking for but not a question I can answer without knowing alot more info.
Regards Dyno Dave

Thats fair, what gear ratio is best for 1/4 mile

[tinkerbell]

Thats fair, what gear ratio is best for 1/4 mile

4.57238943723943845939457:1

here is something for you to try:


http://www.ozhonda.com/forum/search.php

[barefootbonzai]

lmao, are you sure? i thought it was 4.57238943723943845939458:1

[DynoDave]

Thats fair, what gear ratio is best for 1/4 mile
This is even harder to answer than the first question you asked me again way to many things to take into account when asking about gear ratio's, as a good starting point Hipowerracing posted somewhere his gearing for his B20Vtec and when you look at his setup it would be advice you would think very seriously about as he has run 12.3 very fast for a track based car.
Regards Dyno Dave

[tinkerbell]

lmao, are you sure? i thought it was 4.57238943723943845939458:1

mine is compensated for the 1mm of tread that is lost in the burn out... ;)

[pwr2w8]

no probs

[grumpy rooster]

Thats fair, what gear ratio is best for 1/4 mile

You need to take into consideration things such as max engine rpm, gearbox ratios and tyre size (ie diameter). That is not all you need to work out the best diff ratio but it will be a good starting point.

[jdmTYPE R]

been awhile since my last update on my motor just waiting for it to come back from the machine shop....i finally found myself a buddyclub tri Y headers thanks to bearfootbonzai ...
http://i11.photobucket.com/albums/a157/vilain/DC2R/P5300020.jpg[/URL]
pretty much rare to get in australia as buddyclub australia only brought a few in..
http://i11.photobucket.com/albums/a157/vilain/DC2R/P4240278.jpg[URL="http://i11.photobucket.com/albums/a157/vilain/DC2R/P4240278.jpg"] (http://i11.photobucket.com/albums/a157/vilain/DC2R/P5300020.jpg)
spoon spark plug leads for the bling :)

[dupac->]

nice headers.. good find!

howmuch do they go for?

[G AE82]

been awhile since my last update on my motor just waiting for it to come back from the machine shop....i finally found myself a buddyclub tri Y headers thanks to bearfootbonzai ...
http://i11.photobucket.com/albums/a157/vilain/DC2R/P5300020.jpg[/URL]
pretty much rare to get in australia as buddyclub australia only brought a few in..
http://i11.photobucket.com/albums/a157/vilain/DC2R/P4240278.jpg[URL="http://i11.photobucket.com/albums/a157/vilain/DC2R/P4240278.jpg"] (http://i11.photobucket.com/albums/a157/vilain/DC2R/P5300020.jpg)
spoon spark plug leads for the bling :)

Very nice looking headers, from what Dave has told me this car will be a beast, it will be great to see what it will do down the quarter.

[barefootbonzai]

Fark that's some shiny shit. Spoon leads what a Playa!

[DynoDave]

nice headers.. good find!

howmuch do they go for?
They are currently selling new for $1200 and will be in the country very soon if not already.
Regards Dyno Dave

[eg92b16a]

Velly Velly Nice !!!!
Need sunnies with all that shine.

[V73C]

hey, im just wondering roughly how much it'll cost to build a B20 wifout the quads and all that ?

[Benson]

Looking good !

Give DynoDave a Pm about prices on B20's. I believe V2 B20 is up for sale. 13.4 down the 1/4mile with a base tune.

[jdmTYPE R]

Fark that's some shiny shit. Spoon leads what a Playa!

hahahah i was just excited to have it in my hands since its been a while looking for it....thanks to u bro and your welcome to brorrow the leads whenever u need it hahahahha:p

[jdmTYPE R]

Very nice looking headers, from what Dave has told me this car will be a beast, it will be great to see what it will do down the quarter.

thanks, yeh pretty much got everything we need for the motor i cant wait to take it down the straight as well..

[xtercii]

how much are the leads going for?

[zco]

RICE KIET ! RICE !! haha

[jdmTYPE R]

RICE KIET ! RICE !! haha
they work well to man hehehehhe:p

[jdmTYPE R]

how much are the leads going for?

they r about $340

[Phamburger]

Kiet those are some sexy looking headers man.

So bring n clean :).

I also notice u got new spark plugs. Dont mind giving me those yellow ones u got?
kekekeke

Regards,
David

[Klayemore]

Looking good !

Give DynoDave a Pm about prices on B20's. I believe V2 B20 is up for sale. 13.4 down the 1/4mile with a base tune.

That wouldn't happen to be the one that's going into my CRX as we speak would it? :p

[jdmTYPE R]

That wouldn't happen to be the one that's going into my CRX as we speak would it? :p

i think the v1 is going into your car dude...

[Klayemore]

lol fair enough. Should be in by this weekend. Can't wait. Good luck with your build anyways looks hell mad.

[felixR]

sweeet build.. more pics plz :)

[barefootbonzai]

bump for updates.

ps. you just wasted your money. you could have just got a d-series turbo that would munched your setup down the main road near the factory.

[destrukshn]

bump for updates.

ps. you just wasted your money. you could have just got a d-series turbo that would munched your setup down the main road near the factory.
lol.
-_-
lol.
common now, d series aren't that bad............................................... ....
they're just nuggets.
lol.

[xtercii]

D series is hectic, my old d series was indestructable, flat shift, reverse burnout, massive gear crunchings...still ran reliable and like a dream...

[destrukshn]

D series is hectic, my old d series was indestructable, flat shift, reverse burnout, massive gear crunchings...still ran reliable and like a dream...
lol
living proof.

but serisouly, does vtec engage in reverse?
lol.

[xtercii]

my d series had no vtec!!
mite try on my current b series if my mood kicks in haha...

[jdmTYPE R]

hahahaha only if dc2r came out in d series

[SLOWEGG]

LOL every thread will probably be like this now. Anyways awesome leads man, so shiny.

[sydteg21]

ricer : p

[Honda_CRX]

Bump for more info on build progress !!

[DynoDave]

Bump for more info on build progress !!
Still waiting on custom pistons.
Regards Dyno Dave

[Sexc86]

love you build mate! good luck with it, mind me asking where you got the spoon leeds from and how much?

regards lyle

[Honda_CRX]

love you build mate! good luck with it, mind me asking where you got the spoon leeds from and how much?

regards lyle

Bro jdmTYPE R said 340$ - top of page 12 didnt say where tho

[jdmTYPE R]

piston just arrived :):):) after a few complication.now we can get started
http://i11.photobucket.com/albums/a157/vilain/DC2R/PA150398.jpg

[dupac->]

nice shit there man..!

[vtegra]

Oo Nice... Keep Us Updated

[jdmTYPE R]

after waiting so long time on parts i fiinally got the motor together ready to be installed....
http://i11.photobucket.com/albums/a157/vilain/P1080631.jpg
http://i11.photobucket.com/albums/a157/vilain/P1090635.jpg

[barefootbonzai]

pure sex!

[Hipowerracing]

looks good bro.. very impressive :)

[Fuzz21]

how long till u get this thing on the road.. i wanna see it go

[90LAN]

man thats looking real nice! hopes it makes the no's for u

[Q_ball]

Its a happy new yr huh :) haha

[barefootbonzai]

how long till u get this thing on the road.. i wanna see it go

should be ready sometime today! ahhahah

[jdmTYPE R]

imhopping toget it running today but the weather is hot today

[HACRcivic]

this engine is gonna be insane dude. good work!!

[BlitZ]

quickly.. eat k20

[dc2rrrr]

solid centre clutch i see nice. So does this mean you will beat me now????
Think i need to build a new engine too then hehe

[VTec1987]

or d16. I hear there is one sitting around somewhere without a camshaft , dizzy or a radiator cap. But it still runs 12's :)


werent u the clown that was meant to book him in for a dyno or pay for his wsid?

[dupac->]

where are we now with this build?!?!?!

saw u drving on hoxton park rd the other day
lol
:wave:

[dc2rrrr]

HAHA IM STILL GREY AFTER YEARS. DAMN.

Kiet when you taking it to the track next?????

[zco]

eastern creek twilight 25th jan 08

[phwoaaa]

awsome stuff dude =)

how much power u think that'll be making??

[bennjamin]

shit i just noticed, I have 2 green blocks now, when did that happen.

Time for a partey y0!

FTW ! Its about time.

Seriously tho , Has Kit got any updates on his setup ?

[jdmTYPE R]

yeh just been busy at work and the weather is stupid i havent even had time to put it in,but should be ready for the twilight track day.my car is on stands at the moment and also waiting on couple of bearing for the gear box.

[teh_mechanic]

keen to see this thing in action...someday
very nice

[dc2rrrr]

Dont Forget Kiet You Have To Beat A 109.5 At Wakey And 153.5 At The Creek. Hahahaha Then And Only Then Will I Be Your Bitch

[jdmTYPE R]

Dont Forget Kiet You Have To Beat A 109.5 At Wakey And 153.5 At The Creek. Hahahaha Then And Only Then Will I Be Your Bitch
hey trent try doing it now.........

[dc2rrrr]

Hahaha good point.

[fatboyz39]

lol trent....

any updatessssssssssssssss??????????????? wna hear it down EC straight!!

[jdmTYPE R]

should be there for EC track day

[felixR]

looking real good man!

[heartagram integra]

hey have you tried quads on it yet? I'm thinking of getting ITB for my B20 and its a similar setup to yours but with Jun stage 3 stuff. Not sure what intake to finally go with???

[EGeatsB20]

mate your b20 is off the hook. should definetly go with the quads on a setup like that and sound would be unreal. good work
:p

[bubblecivic]

hey how much power is this thing making??

[Nath]

any 1/4 tiomes yet? is it even running.

im trying to do reasearchg for my own B20VTEC build... not quite as balls to the wall as this :P

[mr_vtec]

aye man this car is sold dont know which motor but yea he sold it and moved to an evo lol...


hassy