PDA

View Full Version : performance mods



Hondina
24-04-2007, 03:12 PM
Hey peoples im looking to do some mods to the engine, its a 94 accord exi, i need a new exhaust so going to do that, and was thinking along the lines of a cam and extractors, does anyone know a good cam to use and what size exhaust? 2.5 all the way? and any other suggestions on power mods? nothing to over the top though

cheers

040501912
25-04-2007, 01:59 AM
2 1/4 should be enough... 2.5 abit big for a minor mods it hink ...

what do you mean by CAM ? Cam gears? Cam Shafts? ??

or Air intake manifold? short ram, cold ?

VafcII airfuel ratio and vtec controller... since we are in perth no hondata tuner :p

Hondina
26-04-2007, 02:19 PM
ok will speak with my mechanic about the camshaft see if he knows anyone i think the intaks been done not sure the guy we bought the car off apparently had a intake system but put it all back stock including exhaust which sucks, i also need a new clutch as this one is slipping big time any suggestions?

040501912
26-04-2007, 02:59 PM
get the parts of honda .. for spareparts..
and do it at your own mechanic ... did mine $250 for labour .. parts .. i cant remember..

FkjAccord
30-04-2007, 07:01 PM
2.25 is enough for NA -

is it manual or auto?
if manual get a decent clutch
Air pod
Extractors
Cat back
and a VAFC for a better drive (Remeber you dont get much pwr gain)

If not, save up
Get yourself a H22a
or
Boosted it

Hondina
01-05-2007, 02:35 PM
how much would an engine swap cost and how much to boost it? anyone?

and yes it is a manual and am getting anew clutch as this ones gone

FkjAccord
01-05-2007, 04:56 PM
how much would an engine swap cost and how much to boost it? anyone?

and yes it is a manual and am getting anew clutch as this ones gone

If you like to find out more with engine swaps and boosting
please ask for Andy - AKMOTORWORKS

Cause im boosting my h22a and it is in order to be completed very soon

Hondina
01-05-2007, 06:29 PM
ok will have a look tomorrow do they have a webpage at all?

Luke Accord
06-05-2007, 07:00 PM
I got a jdm h22a put into my 1994 Accord for $4500 it's done 50,000 k's hope this gives you a bit of a guide. Cheers.

040501912
07-05-2007, 01:45 AM
turbo ing cost arround $5500 better then h22a swaps? :p

Vinnie
08-05-2007, 12:49 AM
turbo ing cost arround $5500 better then h22a swaps? :p

serious? ide heard figures for complete turbo setups on CD5's done by workshops to be closer to the $10k mark...

040501912
08-05-2007, 06:18 PM
nah if you got the correct parts :) ...
get a kit of USA... make sure it easy fits in and just ECU + tunning :) thats about it ..
well if u wanna run high boost + injectors (200), fuel pump(180), fuel reg(90) ...


KIT of USA Treadstone - use turbonetics turbo and spearco intercooler = 3700 included shipping .. ecu .. 500 (emanage ultimate) + tunning 600 add up ur self :p ...

if u could put it ur self save up more money on labour .. Australian Labour is EXPENSIVE CRAP !! dun let it rip a hole on ur pocket LOL

all in $Au