View Full Version : DC2R Rails Into EK
Bodgy Racing Developments
30-04-2007, 09:42 PM
Can DC2R rails fit into an EK civic? What sort of modifcation needs to be done?
Any help would be great, thanks
bennjamin
30-04-2007, 09:45 PM
easy.
Just swap the INNER rail (one closest to the handbrake/belt buckle) on the seat with the car yo want it to fit. 2 small screws , and 3 small 10 or 12mm nuts and the whole side will come off , swap it over and reinstall.
The OUTER rail is exactly the same on both cars.
Bodgy Racing Developments
30-04-2007, 09:48 PM
so just get the inner rails from my stock ek seats and fit it to the dc2r rails?
bennjamin
30-04-2007, 09:54 PM
so just get the inner rails from my stock ek seats and fit it to the dc2r rails?
Well , this works for standard seats , i have heard off issues with recaro rails.
Ideally , you would take the INNER rail / mount off the DC2R seat and swap it with the EK one. And thats it - the OUTER is the same as the EK design.
Bodgy Racing Developments
30-04-2007, 09:57 PM
it would be for dc2r recaro rails. so yeh.
bennjamin
30-04-2007, 10:18 PM
it would be for dc2r recaro rails. so yeh.
just sit it all down with a few tools and have ago.
Try what ive suggested and see if that works - small chance the EK/DC2R rails might be slightly different height.
normal DC/EG rails are the same height as EK rails
what seat you gonna installed ?
Bodgy Racing Developments
30-04-2007, 10:20 PM
dc2r recaros. but dont really wanna spend another 400 or so on rails unless i really have to.
kayot1k
30-04-2007, 10:52 PM
should be possible if own a set of ek rails also.
like benn says sit down have a look at it and give it ago.
cheap as chips,
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.