f22 TB on b16a1

[Dxs]

I have a f22 throttle body here which i plan to put on my b16a1.

just wondering a few things,

1) TPS, it looks as though the plug fits, do they have the same voltage?
2) It has a MAP on the TB where as the b16a1 has the map on the firewall, can i get a plug for the map on the tb and connect it to the 3 wires on the map on the firewall? ie. Are the voltages the same/compatible?

also there was a pocket of oil in one of the dimples in the throttle body after removing the gasket stuck on it, i presume this is nothing done from factory

[ECU-MAN]

yes both are compatible and have the same pin orientation

[Dxs]

thanks mate

[tseesinngwailo]

What size is the throttle body? let us know how you go, I was thinking of using a Ford Falcon one
http://www.teirney.net/civic/ThrottleBody.htm
This was a NZ site I found, but it still seems like a lot of work

[tseesinngwailo]

Post pikkys too :)

[Dxs]

well the f22 is 60mm factory.. and can be had cheaper than a b series and has the fitv on the tb (which i need).

i believe they can be bored to 64mm
and i think ITR is 62mm in comparison