SiR questions

[gelo]

i found this picture of this cluster

http://users.bigpond.net.au/gelo/sir_dash.JPG

does anyone have a dash like this?
it looks quite nice i think
(the mph would mean that its in the US?)

also
the jdm ek4
is the SiR sticker completely flat or does it bulge out a bit

[geo41e]

i think thats of an ebay type thing..not too sure

[eknine]

i'm sure someone in here has it ;)
....all i can say its japan made, but it is not from the JDM ek4.

in terms of rarity or price the ek custer list goes like this

1) CTR cluster ( influx of this is all over ebay, price has been depreciating because of this too - the CTR craze, but many time for a penny or too less the followings in second place usually fetch a little less<-dumb sellers)

a tie in second place - either-or is the price and the rarity of it
2) JDM ek4 cluster (ask genesis for a pix)
2) the above cluster which you have posted:) -> i'm sure an intelligent guess will tell you where that cluster is from:)- i'll be glad to induge you if you are keen. (at many times you could even get it cheaper than the CTR cluster - just show how dumb they are)

4) ek spoonsports cluster (rarity and price goes out to this king of ek cluster)

other than that, this in recent time is what i kawtow to<laffz>
the ef spoonsports cluster <- should be inducted into the history of all civic cluster...
http://www.honda-tech.com/zerothread?id=901303
i give it to cxshoe for even willing to give it up :thumbsup:

[eknine]

btw if you are looking for more SIR stuff.

just a head ups-> i know sypherg has the SIR emblem for the rear hatch, which i think he don't mind selling ;)

[SiR]

That dash is from the Canadian version of the EM1 coupe cos it's called the SiR over there. The US version is the same, but minus the 'R' - just the Si!

[eknine]

That dash is from the Canadian version of the EM1 coupe cos it's called the SiR over there. The US version is the same, but minus the 'R' - just the Si!

Righto! Canadian it is:) because of the geographical location of the 2 countries and the different system used. Thus a canadian vehicle equipped with dual system allows for usage between the two countries:)

[A'PEXi]

i think its a US-Spec SIR cluster?

[SiR]

i think its a US-Spec SIR cluster?

Nope. The US doesn't have a SiR.

[gelo]

thanx guys

what about the SiR sticker?
is it flat like the VTi-R one or does it bulge out ?

[SiR]

The US version 'Si' is just a red sticker.

As for the Canadian 'SiR', I'm not 100% sure, but I think it's just a sticker as well.

[eknine]

i think its a US-Spec SIR cluster?

It is a canadian cluster



The US version 'Si' is just a red sticker.

As for the Canadian 'SiR', I'm not 100% sure, but I think it's just a sticker as well.

the SIR being a sticker on the cluster -> it is not:)

[eknine]

thanx guys

what about the SiR sticker?
is it flat like the VTi-R one or does it bulge out ?

the SIR emblem come on JDM EK4.

does it buldge out? yes it does

how it looks like -> here it is....

www.modacar.comhttp://www.modacar.com/Merchant2/emblem_honda_files/sir_emblem1.jpg

and can you find a genuine one -> yes sypherg would have one that he will sell for cheap.

difference between real and replica->the replicas are usually non-reflective.

to get the AUSDM EK vti-r to look like the JDM EK4, all you need is to swap in the JDM ek cluster(i'm sure if you pm genesis, he would have a pix of his for you) and have the SIR emblem as above. There,you are done. if you are in for stock look. this is the best - stock JDM you can get without spending much:)

[[[d a n n y]]]

i need a EG SIR.

[gelo]

thanx eknine
that's a big help

danny, i would so buy a eg6 over ek4
except im not in melbourne..........
and i dont wanna do an engine swap

[eknine]

thanx eknine
that's a big help

danny, i would so buy a eg6 over ek4
except im not in melbourne..........
and i dont wanna do an engine swap

no worries, and i heard that you have also contacted sypherg ;)

btw if you are really into that canadian cluster, i have to tell you that the cost of shipping is one factor that you would have to look into if you are considering buying.

and if you are that keen i could get the boys in canada to help keep a look out. else a JDM piece is a good buy, japan is closer and the cost is thus lower in some aspects.

Have fun:)

[A'PEXi]

canadian spec then :P relativley close to the us hahaha

[eknine]

gelo if you are keen somone is selling

http://www.honda-tech.com/zerothread?id=906887

[eknine]

a pix of the US Spec Si cluster ..the difference between that of the Canadian SIR

is the SI and SIR (slight colour, wording and location ) + the US Si cluster also have the "maintenence required" resets

http://www.chillybanana.com/for_sale/si_cluster/197-9727_IMG.jpg
pix taken off Keith from www.honda-tech.com

http://www.imagestation.com/picture/sraid124/pae2172d9ae245c6aef4876bc240f0f2f/f81e2477.jpg
pix taken off romeirome1 from www.honda-tech.com

[gelo]

actually

i havnt contact sypherg yet
lol
maybe it was someone else who saw this thread

yeah
thanx for the help
i will keep that in mind
but i prob wont be doing anything to my car for a while
(except 4 mayb the grill eh eh eh?)