PDA

View Full Version : Front Jack Point


aimre
16-05-2007, 09:52 AM
Just making sure, need to know by 3.30

Is the front jacking point on an EG/EH that flat OFF-CENTER plate around the radiator??

Thanks
destrukshn
16-05-2007, 09:58 AM
yes it is off centre more to the passenger side of the car.
it's ****ing stupid.
lol.
Zdster
16-05-2007, 10:37 AM
yes it is off centre more to the passenger side of the car.
it's ****ing stupid.
lol.

What is the logic for that. It is the same with the ek's as well and it is so annoying. Its like how the jack points arnt wide enough on the side to jack the car up and slide a jack stand in at the same time http://hfboards.com/images/smilies/bangHead.gif
JasonGilholme
16-05-2007, 10:39 AM
I thought it was because of the weight distribution of the motor....

Turns out its not cause the car ends up on a nice angle once she's pretty high lol.
destrukshn
16-05-2007, 10:50 AM
yups, it's ****ing stupid.
i always bitch and complain.
lol,.
JasonGilholme
16-05-2007, 10:53 AM
It shits me cause the jack stand on the drivers side gets under easily but the passenger side one is knockin on the side skirt.

Gotta raise it up so that the drivers side one is about 2 times higher then the other....

Kinda scary. Looks like the car is gonna slide out the garage.
destrukshn
16-05-2007, 10:57 AM
It shits me cause the jack stand on the drivers side gets under easily but the passenger side one is knockin on the side skirt.

Gotta raise it up so that the drivers side one is about 2 times higher then the other....

Kinda scary. Looks like the car is gonna slide out the garage.
or get a jack that can higher.
that's my solution, just waiting for it now.
lol.
JasonGilholme
16-05-2007, 11:05 AM
i got the same jack they use at the tyre shop so its good enough.

Can lift 2400 kgs (car only weights 960 tho!!)

Goes pretty high.
czy_sol87
16-05-2007, 11:57 AM
yeh i hate that jacking point i jack my car up all the way untill the jack cant go up any higher and still i can only get the stands in if the pin is on the first hole, not high enough imo
JasonGilholme
16-05-2007, 12:01 PM
hahah i had someone tell me to jack it up from the base of the sump.... :thumbdwn:
destrukshn
16-05-2007, 12:03 PM
hahah i had someone tell me to jack it up from the base of the sump.... :thumbdwn:
did you?
hahahahha
JasonGilholme
16-05-2007, 12:10 PM
hell no!!! lol

I like my sump fully sealed with no holes thanks.lol
Drew
16-05-2007, 12:22 PM
Hardly an issue when you have a hoist ;)
fatboyz39
16-05-2007, 12:27 PM
gotta be careful when jacking on th EG's. The bottom of the radiator support tends to bend. Put the jack at the right spot and jack it up. There is a reason behind why honda put the jack point to the passenger side.
mrwillz
16-05-2007, 02:20 PM
What is the logic for that. It is the same with the ek's as well and it is so annoying. Its like how the jack points arnt wide enough on the side to jack the car up and slide a jack stand in at the same time http://hfboards.com/images/smilies/bangHead.gif

do u jack one side at a time
its annoying on eks
one jaack point directly on each corner of the front.