rnbguy
21-05-2007, 07:13 AM
do these below fittings sounds right to you? any input would be good, its for a TD04L turbo: (on a budget)
1 x Oil Feed -3 Teflon Braided Line to suit 1/8 NPT to M10x1.5 = $73.50 for
0.5 Meter hose and $83.45 for 1 meter hose.
1 x Oil Drain -10 Rubber Braided Line to Suit 38mm Flange to 1/2 NPT =
$141.25 for 0.5 Meter hose and $167.55 for 1.0 meter hose.
1 x 1/8 BSPT Oil Tee and Plug - $21.50
1 x Dash 10 to 1/2 NPT oil drain bung - $11.55 included in above price.
A cheaper way for the drain is push on hose with clamps
Fitting for turbo and 1 meter hose is $93.50 you will need 2 good clamps and
a Hose tail fitting for the sump.
1 x Oil Feed -3 Teflon Braided Line to suit 1/8 NPT to M10x1.5 = $73.50 for
0.5 Meter hose and $83.45 for 1 meter hose.
1 x Oil Drain -10 Rubber Braided Line to Suit 38mm Flange to 1/2 NPT =
$141.25 for 0.5 Meter hose and $167.55 for 1.0 meter hose.
1 x 1/8 BSPT Oil Tee and Plug - $21.50
1 x Dash 10 to 1/2 NPT oil drain bung - $11.55 included in above price.
A cheaper way for the drain is push on hose with clamps
Fitting for turbo and 1 meter hose is $93.50 you will need 2 good clamps and
a Hose tail fitting for the sump.