100mm Diagonal?

[integra95]

Hi guys,

I'm about to purchase new rims for my 95 gsi! In the add the person said they are 4 stud with bolts 100mm diagonal. wots the offset of these and will they fit my car?

Cheers:thumbsup:

Tim

[Zdster]

You cant figure out the offset from that, but assuming he measured from the centre of one stud whole diagonally across to the centre of the other then you know that the pcd is 4x100.

My integra wheel info. as basic, but I believe that is your stud pattern (hopefully one of the integra guys can help us out here).

Re: the offset, ask the owner if it is stamped into the rim (it usually is) and will say 'et +xx' or just '+xx'. Other than that you can always ask him to measure it for you using this: https://www.rsracing.com/tech-wheel.html