what to go with ???!!! HELP!!!!?!?!?!

[MRDEANOS]

howdy all im currntly lookin at dropin in a prelude H22 or a integra B18c
wonderin what has more hp and would be a better choice ..

And how long would it normaly take to install it eg. 1 - 7 days or is it goin to be a cppl of weeks ???

[destrukshn]

people can do it in 1 day.
some people may want to strecth it over a few weeks, depends who you give it to.

[MRDEANOS]

ok what about the choice i should go with ?? i want wats best and what will make my car quicker

[Kiki]

Id drop in a B18c thats what im planning on doing with the civic Eg...i find its a better engine very reliable and newer, others will argue..but eh!!

At honda when putting in engines could take one day or couple of days...depending on when customer wanted the car. Also depend where u put it in...ask around for a good place with a good rep.

[SLOWEGG]

I would go B18C because its easier and saves alot of headaches. H22A you will need custom mounts, driveshafts, etc.

[Joeyboy]

Hmmm....This might help:

H22A
Specifications

Bore × Stroke: 87.0 × 90.70 mm
Displacement: 2157 cc (132 cu. in.)
Valve Configuration: DOHC, 16 valves, VTEC
Type: In-line 4 cylinder, aluminum block and head
Compression ratio: 10.0:1 (North America); 10.6–11.0:1 (Japan)
Max power: 190PS (CD6 Accord); 200PS (BB1/4/6 Prelude SiR's); 220PS
(Euro-R & Prelude Type-S) (142–164 kW)
Max torque: 156–163 ft·lbf (207–217 Nm)


B18C
VTEC
Found in: JDM Spec Honda Integra ITR
Power:
200ps (200 hp) @ 7800 rpm
134 ft·lbf @ 6200 rpm
Transmission Type: 5-speed standard
Displacement: 1797 cm³
Compression: 11.1:1 (JDM) - The USDM Integra Type-R 10.6:1
Bore: 81 mm (3.189")
Stroke: 87.2 mm (3.433")
Rod Length: 137.9 mm (5.429")
Rod/Stroke Ratio: 1.58
Transmission: Y80

[MRDEANOS]

thanks guys heaps of help :D

[AsH_]

B18C ftw...

[JamB]

http://www.ozhonda.com/forum/showthread.php?t=30312

Ask this guy

[90LAN]

b18c mate or b18cr

[SHIFTY]

depends if u whant kw or torque..

H22A set up right will have good torque
B18C will rev its **** of and have good kw but same with the H22a (besides the revving its **** off :P - well will not rev like a b18)