b18c in a civic

[dAzLr]

im looking to put a b18c type r engine into an eg civic, has anyone done this conversion recently ? i just need to find out a few things, engine mounts gear box axels etc if anyone knows much about the conversion please let me know cheers

[Sexc86]

gday mate,

basically from the little research i have done on the bseries conversions, if your car is a dseries... you will need the complete engine and box of course, the Ecu and wireing loomb, Bseires Engine mounts, which you may be able to find cheaper oem as some eg's came with a bseries, or your maybe able to use the Dcr2 Mounts ? (not sure) also will need Cv's and driveshafts

If you are lucky enough to own an EG SIR import that have the b16 i believe the conversion would be alot easier as mounts cv's etc would be interchangeable (correct if wrong)

good luck bro

[bennjamin]

IF you get it in a halfcut , use the driveshafts and mounts out of that. And the PS or AC if you want it too.
Otherwise the standard TORQUE mounts are teh same B or D series.
Its the ENGINE mounts (left and right) that you need B series for.