View Full Version : turboEDIT tuning program
qikteg
31-05-2007, 03:28 PM
has anybody had any experience using turboEDIT? my ITB setup is coming along nicely, and i'm going to need a tuning program, as the hondata series of ECU is incompatiable with my engine.
any other suggestions for alternative tuning programs would be great also
DynoDave
31-05-2007, 03:31 PM
has anybody had any experience using turboEDIT? my ITB setup is coming along nicely, and i'm going to need a tuning program, as the hondata series of ECU is incompatiable with my engine.
any other suggestions for alternative tuning programs would be great also
Yes I have used TurboEdit and I think Toda AU has aswell from what I have been told.What Car/ecu/engine/wiring are you using now.
Regards Dyno Dave
qikteg
31-05-2007, 03:34 PM
da3 Honda integra, d16a3, unsure of the ecu or wiring, but it would all be stock atm
so i think thats OBD0, but i'm really not sure
ECU-MAN
31-05-2007, 04:21 PM
can you read the lable on the ECU ???
it would help to know what ECU you have to see if yo can use turboedit
qikteg
31-05-2007, 04:28 PM
i'll have a look tonight and get back to you.
do uberdata or crome have any advantages over turboedit? esp. in an ITB setup?
qikteg
03-06-2007, 11:12 PM
okay, its a PG6 ecu...
wat now?
stocky
05-06-2007, 09:51 AM
If it helps, im experimenting with BRE, another OBD0 binary editor on a PW0 ecu.
So you could change your ecu, alter the parameters to make vtec never switch on and there you have a map to work with.
creativepunka
05-06-2007, 02:58 PM
i'll have a look tonight and get back to you.
do uberdata or crome have any advantages over turboedit? esp. in an ITB setup?
Crome is obd1 only.
Crome is OBD1 only actually.
fat_85_civic
05-06-2007, 04:36 PM
none of them will work with your d16a3
if you want to use it you will need a newer ecu and to change your dissy from vac advance to electronis advance.
creativepunka
05-06-2007, 06:20 PM
Crome is OBD1 only actually.
cheers mate i fixed it up. lol i have no idear why i put obd2 lol i knew it was 1.
ECU-MAN
06-06-2007, 07:36 PM
okay, its a PG6 ecu...
wat now?
I dont think turboedit suppports the PG6 ROM, you never know though it might. just dont know unless you try.
as people are suggesting, convert to OBDI and crome or uberdata.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.