j's racing intake [Archive]

enkay

07-06-2007, 04:25 PM

oo i searched and didnt find anything so yer, i thought id post it up
looks interesting.. its the j's racing intake hehe =D its similar to the mugen one where it draws air from the front
cliky here for info (http://www.tsxclub.com/forums/showthread.php?t=19378)
here are some of the pics
http://www.aj-racing.com/catalog/files/d_2051.jpg
http://www.aj-racing.com/ajpwr/CL7W/CL7intake-1.jpg
http://www.aj-racing.com/ajpwr/CL7W/CL7intake-2.jpg

type-vtec

07-06-2007, 05:03 PM

theres a forth pic, here it is
http://www.aj-racing.com/ajpwr/CL7W/CL7intake-3.jpg

Chris_F

07-06-2007, 05:38 PM

interesting design... thought it looks kind of ugly in the engine bay

aaronng

07-06-2007, 06:16 PM

OMG, did J's Racing just rip my design off? :p

http://img181.imageshack.us/img181/4146/25paintedqs4.jpg

http://img181.imageshack.us/img181/7008/17intakeholewithsidetz8.jpg

http://img242.imageshack.us/img242/5109/20clamparoundthepipenb7.jpg

http://img151.imageshack.us/img151/9952/22pipethroughfoglightpa3.jpg

http://img176.imageshack.us/img176/7349/24closeupnz2.jpg

Chris_F

07-06-2007, 06:28 PM

yep looks like they did, yours sits more flush though :P

whereabouts did you pick up that ducting? I've been looking for some

ALN

07-06-2007, 08:25 PM

It is very2 identical. It is also similar to Gruppe M design .

type-vtec

08-06-2007, 11:57 AM

JasonGilholme

08-06-2007, 12:42 PM

yep looks like they did, yours sits more flush though :P

whereabouts did you pick up that ducting? I've been looking for some

You can get that ducting from bunnings.

Its in the kitchen section. Its meant to be used for channeling hot air from above the oven out of the house so its a descent heat resistant material.

I used some for ducting some air as well. Easy to work with and does the job quiet well.

J-TODA

08-06-2007, 01:10 PM

yer or u can get the rubber type one ...from repco or autobarn...comes in a variety of colours..:p ...i got a black one...not using it atm though might use some of it to direct air to the comptech funnel...

Chris_F

08-06-2007, 01:32 PM

You can get that ducting from bunnings.

Its in the kitchen section. Its meant to be used for channeling hot air from above the oven out of the house so its a descent heat resistant material.

I used some for ducting some air as well. Easy to work with and does the job quiet well.

sweet! I'll go to bunnings and check it out

JasonGilholme

08-06-2007, 01:34 PM

sweet! I'll go to bunnings and check it out

:thumbsup: its not tooo expensive. Easy to work with as well.

aaronng

08-06-2007, 02:22 PM

LOL, there the same IMO, but urs is more ghetto in the bottom

Mine channels direct cold air into the enclosure. The J's one doesn't because they need it to work with fog lights. Mine is a base model, so I could channel from the fog light cover for better gains. :p

aaronng

08-06-2007, 02:22 PM

yep looks like they did, yours sits more flush though :P

whereabouts did you pick up that ducting? I've been looking for some

Yup, it's the ducting that jasongilholme mentioned.

Chris_F

08-06-2007, 05:37 PM

Mine channels direct cold air into the enclosure. The J's one doesn't because they need it to work with fog lights. Mine is a base model, so I could channel from the fog light cover for better gains. :p

we all know the base model is better, but it looks like j's racing has some sort ducting aswell
http://www.aj-racing.com/ajpwr/CL7W/CL7intake-3.jpg

E-Gene

08-06-2007, 05:47 PM

we all know the base model is better, but it looks like j's racing has some sort ducting aswell
http://www.aj-racing.com/ajpwr/CL7W/CL7intake-3.jpg

This ducting is similar to the Mugen one which I've got.

aaronng

08-06-2007, 06:13 PM

we all know the base model is better, but it looks like j's racing has some sort ducting aswell
Yes, the ducting is like the one that is supplied with the Mugen airbox. Good for directing air, but no ram air effect.

sodaz

09-06-2007, 10:27 AM

LOL they copied your ghetto intake Aaron. :D

tony1234

11-06-2007, 09:07 AM

LOL they copied your ghetto intake Aaron. :D
Yeah Aaron.time to get lawyers involved...:D

040501912

11-06-2007, 10:46 AM

or HE COPY J's racing ? HAHAHAHAH :p

aaronng

11-06-2007, 11:39 AM

or HE COPY J's racing ? HAHAHAHAH :p
LOLOLOL!!! :p

Well, I finished mine on 10/10/2006, and started the project on 1/9/2006. I hope J's Racing started their earlier, otherwise I'll be having my virtual lawyers after them. :p

Nah, with J's Racing using the same design, it means that my ghetto design is not so ghetto after all. :)

beeza

11-06-2007, 01:32 PM

I remember the DIY ya did on that one,Great write Up aaronng!
But I couldn't find the tubing at any of the above places.I ended up finding it at a place called 'Flexi hoses'.So if ya run into the same prob check that name out in a directory search.Just call 1223 he he.

beeza

11-06-2007, 03:21 PM

76 mm Flexi hose into a PVC Y Joiner (plumbing shop)
http://i99.photobucket.com/albums/l287/beeza2/DSCF1165.jpg

http://i99.photobucket.com/albums/l287/beeza2/DSCF1170.jpg

http://i99.photobucket.com/albums/l287/beeza2/DSCF1171.jpg
The Large Ducts at the front I got from a plumbing shop to,Everything fitted snug as :thumbsup:
http://i99.photobucket.com/albums/l287/beeza2/coldairduct.jpg

040501912

11-06-2007, 05:00 PM

WWHOOAAAH thats so GETHO !!! LOL
so many of them? wats the use? LOL

E-Gene

11-06-2007, 07:12 PM

Oh no, looks like we've got another contender for Ghetto install king!

EuroAccord13

11-06-2007, 07:50 PM

Nice work you have there...

Sure to get Ghetto Seal of Approval from Aaron!

aaronng

11-06-2007, 09:34 PM

WOW! That's A LOT of piping. Very nice! You should consider doing an enclosure around your pod. RMN15N did a DIY for the EG, which should be similar in position to your EK. http://www.ozhonda.com/forum/showthread.php?t=52057

I kept my piping short because I wanted air to directly flow in without changing too much direction (so I would get better air velocity).

beeza

12-06-2007, 06:56 PM

Ha Ha.Yeh I started with just 1 piece of tubing and then I thought what the hell the more cold air the better and ended up with 4 :p
I had planned to build a perspex box around the Filter then my friend told me about one of those 20 Litre style containers he saw they use for chemicals and reckoned cut right it will work a treat.So when I find one of them I will do that.
That way it will be easy :thumbsup: .
I mean I was going to paint my Valve cover,build a nice looking box and get it looking real pretty under there but I guess I'm just Paranoid cause if a thief pops the hood and see's how Ghetto it is Hopefully he won't want to steal the car :cool:
Ghetto ftw :thumbsup:

beeza

12-06-2007, 07:03 PM

Thanks for the too Link aaronng.Something else to think about...

K24A

19-09-2010, 11:24 AM

Does anyone have english installation instructions for the j's racing intake?

Razer

19-09-2010, 10:31 PM

OMG, did J's Racing just rip my design off? :p

http://img176.imageshack.us/img176/7349/24closeupnz2.jpg

Hey Aaron, justed wanted to ask, if the foglight cover was stuck to the end of your piping, would the flow be even better?? Since the foglight cover kind of acts like a "velocity stack" for your intake. Ive got the 06' so I can have both foglight and intake duct, and just wanted to know. Cheers!