View Full Version : Stupid Honda Horn Design
aimre
14-06-2007, 01:06 AM
Normal cars have horns that just ground on the chassis through their bracket.
But no, Honda have a constant 12v line and a negative as the trigger.
So no, how do i wire up a normail horn to our hondas??
ANy ideas
thanks
[[d a n n y]]
14-06-2007, 01:11 AM
dunno anywyaz call me 2mrw
ill have it with me and ill be in north sydney from 1pm
Edgeauto
14-06-2007, 09:03 PM
Use a relay and wire like this:)
Pin 30 and 85 - +12v
Pin 86 - Horn switch
PIn 87 - New horn
riruiz_88
19-08-2008, 05:15 PM
i am having problems with my horn now. i had to remove the horn from its position to fix something. i hooked everything back up, and now the horn only works once, then shuts off after that. i push the connector to the horn to see if its a loose connection but as said above only works once. i have a OEM steering wheel btw. and the fuse is fine just to point out. any ideas?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.