Your Mods To 2006-2011 FD Civics

[Wayne]

yeah.. because taiwanese and japanese have nice stuff that hardly get here.. xD

[amurray]

I got a set of 17" wheels and slammed my car even more last night lol.. side skirts are 60mm :P haha

[black8thgen]

wow. pics!!!

[TurBIce]

people who are still running stock suspension.
can you check for me,
Does your right side sag more than the left.
my car, on the right i can fit 3 fingers. the left side i can fit 4ish fingers

[dannybubu]

is that with handbrake on? coz if handbrake is on i think the rear on the right side will look like it is sagging...just try...

[TurBIce]

oh really!!
coz yes in fact. everytime i checked my hand break is on. coz i got out of the car. ill give it a go without n check it out.
tah

[denot]

wow dannybubu, is that true? i wanna ceck mine to now... except that mine is @ smash repair :(

[liquid23]

wow which means u need more than $500 us just to ship the hood!!!

well at the current rate now yes cause of the recession. when i did it, aus dollar was high US$1 = AU$0.96 :D

[sKy.xD]

oh really!!
coz yes in fact. everytime i checked my hand break is on. coz i got out of the car. ill give it a go without n check it out.
tah

also check where the fuel tank is, it could be the tank is more on the right side which just adds a bit more weight.

[ej20i]

well u do sit on the rite more often than the left?maybe the rite sags quiker than ur left

[kazam]

spotted 1 of u guys 2day, black with bodykit and black rims with red lip, i've seen pics of it before, i think he was at syd monthly, looks even meaner in person

[air23box]

shipping from jap can cost you up to 700-800 buxs depends one how big is the item.....they dun count weight on bulkie items....they count on size......thai and taiwan may be a bit less......$1800 sounds a bit pricey......unless its a geniune product......if anyone after geniune product I can certainly get a price for you......as I get my stuff from jap direct...

[TurBIce]

could be the fuel tank.
and could be coz i sit on the right.~
btu yeah. hand break on or off. its teh same thing.
so i guess excuss to get coil overs>? lol

[FallenAngel]

That would be rene i think

[amurray]

http://img355.imageshack.us/img355/7576/civicpj6.jpg (http://imageshack.us)

thought i would post it up lol.. my little baby 17's

[black8thgen]

holy damn thats pretty slammed. those 17s look bigger with the car so low haha. got your imported kit yet? :L

[LD_Mart]

i reckon the 17s look alot nicer then the 20s...

[ej20i]

those are nice..well done...black on white is actually nice too huh...

[markCivicVti]

Looks great... but I wonder if the tyre is too low profile to still have the same overal diameter... can't quite tell from the pic. I was going to get white, just never found the right set.

[Wayne]

nice wheels u have.. if u install the mugen kit.. it will look more lowered.. =)

[rene]

Man why dont you say hello! :P


spotted 1 of u guys 2day, black with bodykit and black rims with red lip, i've seen pics of it before, i think he was at syd monthly, looks even meaner in person

[kazam]

lol u drove past me, and i only noticed as u got closer that it had full body kit and i quickly raised a hand coz i new u were from here coz i'd seen your pictures from the syd meet earlier that day.

[rossSmith1950]

Just been playing around with Black Tape trying to change Grill appearance I hate all that Chrome. I cant get Photo to upload you can see it on my profile pic

[kazam]

no we can't

[Wayne]

use www.imageshack.us xD

[rene]

kaz where was this anyway? just wondering ehhe.


lol u drove past me, and i only noticed as u got closer that it had full body kit and i quickly raised a hand coz i new u were from here coz i'd seen your pictures from the syd meet earlier that day.

[black8thgen]

btw amurray what rims are those white ones?

and where u get em from?

[kazam]

i dunno dude, sum where between castle cove and willougby lol

[rene]

Oh yea willoughby..another photo session lol, if you like i'll post the pics from that place...the view of the location was breath taking..


i dunno dude, sum where between castle cove and willougby lol

[black8thgen]

post those pics!!!!

[kazam]

yeh there was another FD infront of u, it was around 5.20 as i was on my way 2 willoughby leisure centre

[rene]

yep thats my mate's car Silver Grey FD's, i'll post it as soon i have em...lazy bastards prolly still asleep.

[black8thgen]

rene whered u get ur cf lip from?

[cracker]

eastern valley way

[dmx]

http://img355.imageshack.us/img355/7576/civicpj6.jpg (http://imageshack.us)

thought i would post it up lol.. my little baby 17's

This nice and neat !!!:thumbsup:
prefer this looks than with ur 20", but personal pref.;)

[howy]

Seems like there's a few of us that are around castle cove / willoughby area :)

Could do a mini meet there...

[black8thgen]

im in hornsby area, could definately come up around there :L

[LD_Mart]

^^^ we can drive there together...

[black8thgen]

hahhaha =]. btw what colour is ur fn2? i think i saw it on the road the other day =]

[LD_Mart]

hahhaha =]. btw what colour is ur fn2? i think i saw it on the road the other day =]

Black...i think i would stand out..
http://i75.photobucket.com/albums/i308/danny_mart/Image-22.jpg

[black8thgen]

oh right, wasnt yours then lol.

wow those are nice rims... whered you get them from?

[markCivicVti]

They are lenso samurai rims by the look of em (red thing in the middle). Tempe does lenso. So does Taleb Tyres (trader here)

[black8thgen]

ahhh. i'm sort of regretting my choice to go for fd2 instead of fn2r...

[markCivicVti]

I just wish I waited for the new Accord... (not the euro)... looks hot with mugen kit.

[black8thgen]

oh really? i reckon the new euro just seems a bit chunky =/. prefer the old model

[ekdez]

new accord v6 is hot

[LD_Mart]

They are lenso samurai rims by the look of em (red thing in the middle). Tempe does lenso. So does Taleb Tyres (trader here)



wow those are nice rims... whered you get them from?

Yeh they are Samurai lenso's SC-03x 19" i got them from jaxx tyres in thornleigh,
Not worth going to tempe or taleb tyres when you know u r just going to get a cheaper deal from these guys..
Plus last time i went tempe they treated me like shit and if i was the biggest retard ever...
Not to bag anyone out but here are the price differences...
Tempe w/ kumho ecstasy tyres - $2799
Bob Jane w/ Falken 451 tyres - $2589
Jax Quickfit w/ Falken 451 tyres & lock nuts - $2100

[black8thgen]

shit, that is CHEAP from jax... u got a great deal hey

[markCivicVti]

I would have gone for the white samurai (forgot the model) if i could get them in... but ended up with Rays G-Games :)

[black8thgen]

ur rays are lovely looking =].

btw does anyone know the width and offset of the 17" enkeis on civic FD2?

[rene]

post those pics!!!!

Pics as promised..black8thgen!! perfect place to hang around, huge parking lot and fishing?

http://img354.imageshack.us/img354/5973/willo13fc3.jpg (http://imageshack.us)

[URL=http://imageshack.us]http://img249.imageshack.us/img249/3852/resizeofrotationofdsc08bm6.jpg[/

[denot]

Yeh they are Samurai lenso's SC-03x 19" i got them from jaxx tyres in thornleigh,
Not worth going to tempe or taleb tyres when you know u r just going to get a cheaper deal from these guys..
Plus last time i went tempe they treated me like shit and if i was the biggest retard ever...
Not to bag anyone out but here are the price differences...
Tempe w/ kumho ecstasy tyres - $2799
Bob Jane w/ Falken 451 tyres - $2589
Jax Quickfit w/ Falken 451 tyres & lock nuts - $2100

LD, what do you think of Taleb Tyres then? Service wise? I was going to purchase my tyres from them...

[LD_Mart]

ive never dealt with taleb tyres before...
Im not saying any of these places are bad, they all sell good products just saying much sure you know you are getting the best price possible price before you buy anything..
Look at how much i saved in the end...
I mean when i rang back tempe to see if they could match the price they told me i was lying and blah blah so i was like stuff u then doesnt bother me u think im lier...

[denot]

well I've rang KMART auto and quote the price that Taleb gave me, and they said "what are you waiting for then?" so... :p

[black8thgen]

haha.

btw at rene: ive been to that spot before as well i think. for a family picnic lol. pretty peaceful and serena spot to hang around for a day =].

[denot]

^^^ is it bobbins head or Lane Cove?

[black8thgen]

i'm pretty sure its lane cove =]. or my memory might be failing me...

[LD_Mart]

^^^ is it bobbins head or Lane Cove?

Bobbin head is always a good drive we should do a cruise down to bobbin head...

[denot]

Bobbin head is always a good drive we should do a cruise down to bobbin head...

nope... theres where my fd2 got his 1st hit... 4 days after delivery from dealer!!!!!! :thumbdwn:

[black8thgen]

LOL.. so i guess ur definately not going there again huh? hahaha

[ej20i]

hahahha...yea bobbin head sounds nice yo

[rene]

where is bobbin head? the names ryhmes with Frodo bobbins?

[LD_Mart]

Theres 2 entrances...

One is 1st exit off the free way at Mt Colah...
Second one is off the pacific Hwy at Pymple...

We should do a cruise like meet at thornleigh maccas, drive to mt colah entrance do bobbin head run to the bottom have a rest do some photos, then cruise out the other side to turramurra/pymble..

[denot]

where is bobbin head? the names ryhmes with Frodo bobbins?

i think its frodo "baggins" :p, and yeah... no more trip to bobbins head for me :zip:

[rene]

baggins bobbins potato - potahto lol im terrible with names

[kazam]

Yeh they are Samurai lenso's SC-03x 19" i got them from jaxx tyres in thornleigh,
Not worth going to tempe or taleb tyres when you know u r just going to get a cheaper deal from these guys..
Plus last time i went tempe they treated me like shit and if i was the biggest retard ever...
Not to bag anyone out but here are the price differences...
Tempe w/ kumho ecstasy tyres - $2799
Bob Jane w/ Falken 451 tyres - $2589
Jax Quickfit w/ Falken 451 tyres & lock nuts - $2100

can vouch for jax 2.

[black8thgen]

anyone know prices on jax for fitting+balancing a new set of tyres if i buy from them?

[tony1234]

anyone know prices on jax for fitting+balancing a new set of tyres if i buy from them?
If you buy the tyres from them fitting and balancing is included in the price.

[black8thgen]

ahh ok. Alright cheers mate

[Stig]

people who are still running stock suspension.
can you check for me,
Does your right side sag more than the left.
my car, on the right i can fit 3 fingers. the left side i can fit 4ish fingers

YESS i thought that was just a problem with my car... the rear right sits a finger lower than the rear left

[dmx]

YESS i thought that was just a problem with my car... the rear right sits a finger lower than the rear left

yupe. just install my undercarriage cover, put the handbrake on.
jacked up the left side,after finish, move the scissor jack to right side and CANT fit. means right side slightly lower than left side.
like dannybubu said, coz the handbrake on.;)

[black8thgen]

anyone got problems with scraping under the front/rear/side bumpers? like on steep driveways etc.. its such a painful sound =[. anyway of fixing it? or is there no point since its underneath?

[liquid23]

go slow on an angle? so like just as the wheel is coming down the slope control with the brake so wheel just gently slides down.
unless your car is that lowered that it just can't be helped just park on the side of the road :thumbsup:

[black8thgen]

hahaha. yeah i guess so.. thanks =] ill have to be more careful.. and less lazy =.=

hows ur lambo doors coming along btw lol

[gerard]

yupe. just install my undercarriage cover, put the handbrake on.
jacked up the left side,after finish, move the scissor jack to right side and CANT fit. means right side slightly lower than left side.
like dannybubu said, coz the handbrake on.;)

Maybe its because the weight transfer to the other side so it's settled lower. then when you come around, its noticeable.

only practical way to check is by measuring it after a short drive on a level road.

[black8thgen]

uhhh ive got a weird problem....

i just noticed today under my car mats... its SOAKED.. only passenger side.. in a concentrated area.. its REALLY wet.... i dunno what the hell happened there, at first i thought it was a leaking bottle. but i checked the bottle and its full still... then i thought it was water splashing in from the fenders.. but i checked fenders and their all tight and no gaps or anything...

so now ive come to the conclusion.. its the A/C unit leaking out water... but im not sure where it is because the leakage is only in the bottom left hand side of the foot well area... and fills up about 1/2 of the whole surface area... if anyone has any ideas or had the same problem... wouldnt mind some help =]. cheers.

edit: BTW: does anyone have the MTEC halogen bulbs in for headlights on their car? and if so.. which one have u got, and are they really bright like in the pics? looking into getting a pair of these.. my narva ones are still an ugly yellowy colour =.=

[markCivicVti]

MTEC bulbs are rubbish IMO... have a set of the blue ice ones (not sure of name any more)... look bling bling but can't see crap lol.

[black8thgen]

oh really? lol.. even the for the halogen low beam headlights? the pics look pretty bright.... i thought only the parkers were rubbish.. so even the low beam halogens are too?

[TurBIce]

yea. i had the mtec bulbs.. what a waste of $
but its weid. i was driving for awhile. n it became REALLY bright.
then soemtimes its dull~~ but blueish.. looks cool..

bout my wheels..
my rear right wheel has camber. while the others dont. weird.

[ej20i]

there mite be a hole under the footwell...dont laugh as my mums mercedes benz C200 2000 model had a bolt missing so whenever it rains and in the car wash, the carpet will soak...at one time it was so bad...it kind of flooded and got my AF1...damit

[black8thgen]

haha nah we've found out that its the aircon hose that seems to be blocked off and it drips down into the footwell lol.. should be an easy fix though.

hmm what bulbs would u recommend that are pretty bright then.. with either a full white bright light or a bluish tint like those mtec...? and arent like those raybrig bulbs which are EXPENSIVE!

[dmx]

hmm what bulbs would u recommend that are pretty bright then.. with either a full white bright light or a bluish tint like those mtec...? and arent like those raybrig bulbs which are EXPENSIVE!
i used Mtec for my odc, bought 4900K, too bluish, crap. changed to 4300K, looks ok. pure white. only $30 :) can't compare to HID or diamond/blue vision.
bright or not, it depends. looks ok if compare to stock, but don't compare to HID/Philips - PIAA;) for that range of price, i highly recommend Mtec.

New family member ;) Leather seat cover
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/seat.jpg

[black8thgen]

ahh i see fair enough. HOLY SHIT THATS FCKING HOT!! where'd you get it from?!?!?!?! and is it like a cover as in.. it covers the whole seat which would then void my sport's warranty on airbags =/...

[ej20i]

im interested in that dmx, is that leather arm rest aswell??
how much is that??
has anyone thought about supercharging the fd?
will it be cheaper than turbo?

[bodaas]

dmx nice seat cover but
the stitching a bit dodgy??

[JaCe]

I haven't heard about s/c the FD. So far I've only heard turbocharging being successful on FD's with 1.6 and 1.8 engines.

[d@vid]

Just fitted HID 6000k, Mtec High beam, and LED parker.

Wanted to get either Panel Filter or CAI

[dmx]

ahh i see fair enough. HOLY SHIT THATS FCKING HOT!! where'd you get it from?!?!?!?! and is it like a cover as in.. it covers the whole seat which would then void my sport's warranty on airbags =/...
warranty ??? Vti-L/sports which is have side airbag ? so forget it then..lol
only available for VTI (non side air bag), VTI owner seems get more option ;)
like this example : CF door line trim
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/cfd.jpg
still have a few set (of 4)


im interested in that dmx, is that leather arm rest aswell??
how much is that??
has anyone thought about supercharging the fd?
will it be cheaper than turbo?
supercharger ? so u want make 0-100 from 7 sec to 4 sec ?:D
seems not available(yet), only Mugen dominator use this;)
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/market/rear6copy.jpg

yes, leather cover(s) with 15 pcs incl. arm rest but u need to dimantle the arm rest (+all DIY). $375 with 2color option and stitches. The leather is much much much softer than civic sport leather and much more comfy when u seat on it. claimed from italian leather material and been stitched by ex Korean KIA leather seat labour :confused:


dmx nice seat cover but
the stitching a bit dodgy??
stitching looks ok. all straight...lol
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/seat5.jpg
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/seat3.jpg
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/seat2.jpg

with type-R under door light (well.. not type-r anymore, now new JDM civic facelift also comes with this light..not sure with thai built)
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/seat6.jpg

[black8thgen]

ah.... damn the sports lol.. well can i get that cf door trim for my sports still? or is that again an only vti option.. which wouldnt really make sense =.=... and yeah the leather on my sports hurts ur ass after a couple hours lol.

[Wayne]

wow dmx.. i like the CF door line trim.. is that available in real CF instead of CF-Look?

[ryanc]

trim only for front seat right???

[edmbranch]

trim only for front seat right???

nar.. pics have rear seats lol..

nice trim dmx.. :cool: always surprising us to be the first to do anything.. it's time to convert ur car to the dominator

[aero]

what kit is that on the red super charged fd? is it called the Mugen Dominator kit?? coz im really liking that rear bumper and exhaust set up. would like to know where i could get my hands on it

[civic_07]

very nice dmx! thinking of doing for the rear seats for mine as i have the VTi-L :D

[dmx]

well can i get that cf door trim for my sports still?
doubt it. sport/VTI-L already have silver line trim, u need to remove that line trim, and not easy to remove it, u have to dismantle the door trim, drill out the line trim clips...and at the end, it won't match with your inner door handle trim(silver) and door switch trim (also silver). only match and better for Vti (which no door line trim) and the one who already have CF interior trim.


is that available in real CF instead of CF-Look?
errr..nope. not much diff in weight..lol but will dig ur pocket much deeper..


it's time to convert ur car to the dominator
lol... no for this, not suitable for my age to drive the car with chunky wing..:D


thinking of doing for the rear seats for mine as i have the VTi-L :D
so u can't do for ur front seat due to side airbag ? means will be diff. rear and front ? errr.. better not doing it..;)

[dmx]

what kit is that on the red super charged fd? is it called the Mugen Dominator kit?? coz im really liking that rear bumper and exhaust set up. would like to know where i could get my hands on it
i think, dominator is concept car (well..limited, before Mugen RR, on 2007), less than Mugen RR. to be honest, never (or not yet ???) know ppl drive this Mugen dominator (if Mugen RR -- yes, we got a couple close to here, Sing got 1, Malaysia got 1, Indonesia got 3, HK got 5,and aussie get 0 :D)

also the bodykit, never see in the market.only type-r and jump to Mugen RR. they skip the dominator style due to more complicated rear kit (need to move the exhaust)

[rk 86 wa]

FINALLY GOT MY BRIDE IN :D

it holds you daaaaaaaaaaaaaaaaaaaaaaaaaaaamn nicely :)

[aero]

also the bodykit, never see in the market.only type-r and jump to Mugen RR. they skip the dominator style due to more complicated rear kit (need to move the exhaust)

these are some pics i found online of an fd with the dominator kit in the phillipines

http://i167.photobucket.com/albums/u157/gh3ttolov3/DSC_0714.jpg
http://i167.photobucket.com/albums/u157/gh3ttolov3/DSC_0703.jpg

i must say that is one of the hotest fds ive ever seen... hence why i so badly want that kit :(
and it looks great with just the hybrid ducktail instead of the big wing.

[Wayne]

Sexy Ride!! xD

[black8thgen]

holy shitttttttt that front bumper is SEXY

[denot]

New Shoes: XD
http://img81.imageshack.us/img81/9630/img0145bw2.th.jpg (http://img81.imageshack.us/my.php?image=img0145bw2.jpg)
http://img186.imageshack.us/img186/2639/img0142zw0.th.jpg (http://img186.imageshack.us/my.php?image=img0142zw0.jpg)

sry for the crap iphone camera :(

[dmx]

these are some pics i found online of an fd with the dominator kit in the phillipines
i must say that is one of the hotest fds ive ever seen... hence why i so badly want that kit :(
and it looks great with just the hybrid ducktail instead of the big wing.
very nice indeed, but anyone notice to rear bumper body line is too explicit and rough? see
1. under the rear light (vertical),
2. bumper horizontal line and the meeting point between them not as a round shape, instead as a sharp point.
3. lower bumper side near the rims and also no air dam scoop

http://www.nihoncar.com/en/news_pics/208/gallery/7.jpghttp://images.paultan.org/dominator_back.jpg
http://i167.photobucket.com/albums/u157/gh3ttolov3/DSC_0714.jpg

and for front, much better, only slightly different shape at side, close to the rims, there's no air dam scoop

http://www.nihoncar.com/en/news_pics/208/gallery/4.jpghttp://images.paultan.org/dominator_front2.jpg
http://i167.photobucket.com/albums/u157/gh3ttolov3/DSC_0703.jpg

seems this replica not as smooth as other mugen replica, but better than nothing :thumbsup:
i believe this is a custom kit, not as mass production

[dmx]

New Shoes: XD

sry for the crap iphone camera :(
nice shoes and great iphone..;)

[denot]

^^^ ty DMX! XD

[rossSmith1950]

http://picasaweb.google.com/rosssmith1950/MyCar# Photos of My Mods

[dammit126]

http://picasaweb.google.com/rosssmith1950/MyCar# Photos of My Mods
Looks very nice I like the new grill. I was wondering what's the head unit model?
I'm looking at upgrading the stock sound system to a better one without a sub though. Also what do you have under the head unit?

[rossSmith1950]

Looks very nice I like the new grill. I was wondering what's the head unit model?
I'm looking at upgrading the stock sound system to a better one without a sub though. Also what do you have under the head unit?
It's a Pioneer DEH-2050MPG $109 at JB's, I wish now I chose one with blue display to match the other gauges on dash. It's a major improvement on the standard head unit that came with the car, I originally put in new speakers thought that would make it sound better but sounded flat and not much coming out of the rear speakers. I then added a Pioneer Amp to the rear speakers it sounded nice and loud but the sound quality was terrible. With the Pioneer it sounds fantastic I don't think I need the Amp but seeing that I had already installed it I decided to keep it.. I used the old speaker frames as mounting plates for the new Pioneer speakers I just cut the centres out with a sharp knife.The original speakers had flimsy plastic frames , the new ones were really easy to install .Even the front door ones, I didn't have to take all the door panel off just unclipped the door studs closest to the speaker mountings.
In the second Din pocket I mounted a clock/temp gauge to fill up the hole a bit cost $39 at Jaycar

[bodaas]

15" steelies

http://img120.imageshack.us/img120/2175/17809351yd8.jpg (http://imageshack.us)
http://img120.imageshack.us/img120/17809351yd8.jpg/1/w795.png (http://g.imageshack.us/img120/17809351yd8.jpg/1/)

[jem.142]

whoa ... what happened to the 20z?

[ryanc]

wow ur side skirt look realy crooked??? is that rite??? are all the replica like this?

[ej20i]

crooked??in wad sense...im looking to get the mooooogen bodykit now...any sources out dere?

[Sherweeeny]

wow ur side skirt look realy crooked??? is that rite??? are all the replica like this?

err its meant to be like that.

[rene]

wow nice steelies bodass! lol you ordering brand new rims from indo or somethin?

[black8thgen]

what happened to those 20's lol?1?!

[black8thgen]

hmm ive got a question about soldering wires to a cigarette lighter plug like this one:

http://www.dse.com.au/cgi-bin/dse.storefront/en/product/P1675

which terminal is for the neg wire and which is for the pos? the guy at dse told me when i bought the plug but i forgot which is which now haha.. can anyone help lol?

[rossSmith1950]

hmm ive got a question about soldering wires to a cigarette lighter plug like this one:

http://www.dse.com.au/cgi-bin/dse.storefront/en/product/P1675

which terminal is for the neg wire and which is for the pos? the guy at dse told me when i bought the plug but i forgot which is which now haha.. can anyone help lol?
I just cut the cigarette lighter connection off my Temperature Gauge and connected it to the same accessory wire I used for the CD/Radio. From what I saw the centre wire on mine (+) was the black wire with silver traces on it, the negative was the plain black wire. I hope this helps

[black8thgen]

oh, hmm in the plug theres no wires though, its just uhm.. at the top theres the small silver rod that sticks out (thats one terminal), and inside theres a metal piece that pops out the side on both sides which slides into the cig socket (another terminal), i cant remember which one is neg and which is pos to solder wires too =/

[rossSmith1950]

oh, hmm in the plug theres no wires though, its just uhm.. at the top theres the small silver rod that sticks out (thats one terminal), and inside theres a metal piece that pops out the side on both sides which slides into the cig socket (another terminal), i cant remember which one is neg and which is pos to solder wires too =/

Im not sure but the ones on the side are probably the negative

[markCivicVti]

"Your mods to 2006-2007 fd civics?" Just had my car serviced. Normally doesn't count... but when a standard service costs $240 then it sure feels like a mod :(

On a serious not, the tyres are finally in. Having the rims FINALLY properly fitted tomorrow. Also will add my newest mod to the car... my new ozhonda sticker :)

Then another 2 mods planned to follow shortly... more on that later.

[bodaas]

whoa ... what happened to the 20z?


what happened to those 20's lol?1?!

it still on 20's :D


wow nice steelies bodass! lol you ordering brand new rims from indo or somethin?

not from indo hehehe, but smaller size rims

[ej20i]

where did everybody get their mooogen kit from??(sydney)

[black8thgen]

nicee mark =]. get some pics up asap!!!!

and mugen kit im getting mine from ebay for 400 bucks off this guy.. its ABS plastic and doesnt seem dodgy or anything, but im gna go up to the warehouse and test fit it first before i purchase so yeah...

http://cgi.ebay.com.au/HONDA-CIVIC-SEDAN-TO-SUIT-2007-MODEL-ONWARDS_W0QQitemZ320328989976QQcmdZViewItemQQptZAU _Car_Parts_Accessories?hash=item320328989976&_trksid=p3911.c0.m14&_trkparms=66%3A2|65%3A1|39%3A1|240%3A1318

[ktvin09]

nicee mark =]. get some pics up asap!!!!

and mugen kit im getting mine from ebay for 400 bucks off this guy.. its ABS plastic and doesnt seem dodgy or anything, but im gna go up to the warehouse and test fit it first before i purchase so yeah...

http://cgi.ebay.com.au/HONDA-CIVIC-SEDAN-TO-SUIT-2007-MODEL-ONWARDS_W0QQitemZ320328989976QQcmdZViewItemQQptZAU _Car_Parts_Accessories?hash=item320328989976&_trksid=p3911.c0.m14&_trkparms=66%3A2|65%3A1|39%3A1|240%3A1318

$400 sounds great to me, it also says that the kit is primed and ready to paint! but isn't that the starting bid price?

[black8thgen]

yeah, but even so. no one bids on that kit lol, which does seem a bit sus to me.... but no complaints.. or anything so yeah im gna head up to the warehouse and check fit it myself asap =].

[bodaas]

looks like somebody gonna start bidding by now. hehehe.. j/k

i really want to sell my kit,, but its already painted lol,,

[black8thgen]

why u wanna sell ur kit? and is it the one on ur car now? so its white?

[funkdr]

How much for your kit? How well does it match?

[denot]

oh nooo bodaas, you going to sell the Civic? :eek:

[markCivicVti]

New mod :D


Finally.. FINALLY now have those rims on..

http://a7.vox.com/6a00fad697b9e80004010980c5eebf000b-500pi

Drop?

http://a1.vox.com/6a00fad697b9e800040109811b0481000c-500pi


I DON'T think so!!

http://a2.vox.com/6a00fad697b9e800040109d0fa9afa000f-500pi

Some new Buddyclub extended lug nuts thanks to 999 Automotive!

http://a1.vox.com/6a00fad697b9e800040109d078fe09000e-500pi

One MOAR!!1! :P

http://a4.vox.com/6a00fad697b9e800040109811b143c000c-500pi

2 mods in one day :P

http://a4.vox.com/6a00fad697b9e80004010980c5eec4000b-500pi

[dyljoy]

nice!

[black8thgen]

thats HOT. btw theres no drop on that right?

what tyres you on? 215/40/18? or 225? what toyo's are they?

aand btw is there any scrubbing or sticking out too much from the guards?

lol sry abt the load of questions :L

damnnn thats a nice looking ride haha

[markCivicVti]

THanks mate.

The tyres are 225/40/18, yep they are toyos tranpath something or another (sorry havent really checked) with 92 W load/speed rating.

The rims are almost flush with the guards (+35 offset).. so not sure if I can lower it. My ride is stock height.. but on a very slight slope the rear sits only one finger above the tyre... so would be worried about scrubbing with passengers in the back. So far tho no scrubbing - tho i havent driven far yet on them.

Maybe I'll need to get some stiff as coilovers if i'm gonna lower it.

EDIT: It doesn't stick out enough to get done for... so +35 offset is safe.. maybe not with 8" or 8.5"

[black8thgen]

ahh i see, that looks great though, but yeah seems there could be a problem if you were to drop it =/. im thinking of going 225/40/18 aswell when i get some rims.

since your 7.5 width with +35 fits, do you reckon i could slide in 18x8 +35 and 18x9 +43?

[markCivicVti]

18x8 with +35 would be the max I'd try on that offset... not sure about the other offset mate. Use the offset calculator. Because it sits flush with the guards... u couldn't lower it much unless u roll 'em. And thats not something i want to do.

http://www.1010tires.com/WheelOffsetCalculator.asp

[black8thgen]

ahh isee. thanks. hmm heres another offset calculator if you havnt found it yet =].

http://www.rims-n-tires.com/rt_specs.jsp

hmm 27mm less clearance to the strut housing... is that a big margin?.. because it sounds like it lol =/

[n/a]

nice wheels and good choice markCivicVti!!!

i dont think i have posted up my wheels or my ride yet... check it out!!!
i've been quiet on the forums just been reading about what fd owners have got to say...

anyways you guys know anything about changing our indicators at the front to an amber
colour???? like the USDM models???

http://img.photobucket.com/albums/v113/jdjc86/ozh.jpg

[denot]

markcivicvti, thats weird!!! mine still have 2-3 fingers gap with the same rim size and tyre size :confused:

[black8thgen]

probably cos his was on the slope lol. just added more weight to the rear =]

[markCivicVti]

Yeah it was a very slight slope... with some load in the back, but not to much.

but yeah, if thats how low it is in that circumstance then I dunno if I can lower it.

[ej20i]

i just added these today yo..hehehehe
Alpine Type E Splits for rears
http://i193.photobucket.com/albums/z257/ej20i/DSC_0002.jpg

Coustic 4 Channel Amp
http://i193.photobucket.com/albums/z257/ej20i/IMG_2960.jpg

Fire Extinguisher!!
HAHAHHA
http://i193.photobucket.com/albums/z257/ej20i/IMG_2966.jpg

Glove Box Lights
http://i193.photobucket.com/albums/z257/ej20i/IMG_2969.jpg

[JOhnnyFD]

Honda CIVIC FD1 (JDM R18A engine)

http://www.ozhonda.com/gallery/showphoto.php?photo=7483&size=big&cat=
Mods Additions:
+ EURO Opti Blue Xenon Bulbs 4200k 9006
+ ZOOM LED Blue Globe Front Parker/Position Lights
+ Buddy Club P1 SF 18 X 7.5J Special Lighweight Racing Wheels Gunmetallic 5/114.3 42+offset
+ Buddy Club Racing Pro Spec Nuts M12-1.5 & Lock Nuts
+ Yokohama Racing Tyres V402A 225/40R18

So far.. more to come TBA

[black8thgen]

looking sexyyyyy ej20. btw did you get a chance to check out that warehouse yet? i think his actual warehouse is in kirraween though.

[bodaas]

there is fd fn s2k meet up & cruise this saturday,, we cruise up to singleton & last destination "city"

anyone interested??

[denot]

Honda CIVIC FD1 (JDM R18A engine)

http://www.ozhonda.com/gallery/showphoto.php?photo=7483&size=big&cat=
Mods Additions:
+ EURO Opti Blue Xenon Bulbs 4200k 9006
+ ZOOM LED Blue Globe Front Parker/Position Lights
+ Buddy Club P1 SF 18 X 7.5J Special Lighweight Racing Wheels Gunmetallic 5/114.3 42+offset
+ Buddy Club Racing Pro Spec Nuts M12-1.5 & Lock Nuts
+ Yokohama Racing Tyres V402A 225/40R18

So far.. more to come TBA

hey johnny... cant see the pics man... somehow :confused:

[Sherweeeny]

nice wheels and good choice markCivicVti!!!

i dont think i have posted up my wheels or my ride yet... check it out!!!
i've been quiet on the forums just been reading about what fd owners have got to say...

anyways you guys know anything about changing our indicators at the front to an amber
colour???? like the USDM models???

http://img.photobucket.com/albums/v113/jdjc86/ozh.jpg

looks really good mate! the car AND the photography. i dont get putting lame ricey wheels on civics, they just dont look with them, that and mass wings, but each to their own!

[denot]

i dont get putting lame ricey wheels on civics, they just dont look with them, that and mass wings, but each to their own!

its better than put a 20" Mirrors as your wheels or a 13" fat fives :p but like u sed each to their own... :p

[Sherweeeny]

LOL you are correct, but i mean the shape of the civic is so awkward that a lot of stuff simply doesnt look good on its MPV futuristicish shape, making it pretty hard for modders to get it right, hence why im not really going to bother trying unless i know its a 100% CORRECT mod.

[black8thgen]

yeah true that. although im sure everyone can agree that a full body kit including a wing (mugen or typeR) looks to be a perfect mod (well obviously since their made for the damn car) but yeah.. the rims is a big decision and can change the whole look and feel of the car i guess.

[JOhnnyFD]

hey johnny... cant see the pics man... somehow :confused:

picture should be under the Gallery Tab and under the Civic section here.

[amurray]

hey guys have u found out how to clear engine codes yet lol ....

[ej20i]

im going to kiraween tomorow man

[black8thgen]

ahh i see. hmm its a long drive though isnt it =/. well couple hours? ahh lol. pm me the details after you check it out mate =].

[rene]

Nice car Sherweeny.


looks really good mate! the car AND the photography. i dont get putting lame ricey wheels on civics, they just dont look with them, that and mass wings, but each to their own!

[deepulse]

hey guys have u found out how to clear engine codes yet lol ....

you can get a scangauge(http://www.scangauge.com/) to clear codes, i'd lend you mine but i'm in canberra :(

best investment i ever made! used it on 3 cars so far...see if theres someone in brisbane with a scangauge who might lend you theres?

[deepulse]

Also should post what i've done to my civic...no pictures yet...waiting for my mods to be done :)

What I've done:
Civic 2007 FD1 VTi-L
K&N Short Ram Air Intake
NST Pulley Kit
Mugen Sports Exhaust
Mugen Aero Kit (Replica)
Red neons under front passenger/driver seats
Double Din Fascia
Car PC (1.6Ghz Intel Atom running Centrafuse frontend, GPS, Bluetooth, WLAN, Reversing Camera, Steering wheel controls)
Stock sound system but powered by a 600W Pioneer amp for my Car PC
18" Iniri Competition Gunmetal rims
Red H's
Mugen emblems

Mods I'm going to do:
Buddyclub/Skunk2 Coilovers (haven't decided which ones yet)
Carbon fibre hood

Mods I WANT to do:
Type-r front AND REAR seats, I can buy the front but there's no point without the rear, might have to buy from Honda Japan somehow...

[denot]

share us some pics deepulse... also, did u install the car pc yourself? what brand is it?

[deepulse]

share us some pics deepulse... also, did u install the car pc yourself? what brand is it?

yep i installed it all myself :) all the mods I've installed myself, I like to play with my car hehe

its a custom made one, bought parts from mp3car.com, ebay and computer stores in sydney, specs are:

Intel Atom 1.6GHz
2GB DDR2 Ram
320GB SATA 2.5" HDD

and then a ton of USB ports :) it also hooks into my OBDII port for engine stats and to clear codes, so i don't need to have my scangauge plugged in all the time

I might take pics when I'm back in canberra, currently in sydney on holidays atm :)

[jpestrada115]

yeah, but even so. no one bids on that kit lol, which does seem a bit sus to me.... but no complaints.. or anything so yeah im gna head up to the warehouse and check fit it myself asap =].

yipee! finally - someone from sydney will test fit the $400 kits from ebay.:)

yeah that's the starting bid price for 2-3 months now and always ends as $400 - more like a "buy it now" price.

can you PM me when you've test fitted it? wanna hear feedback about fitment. thanks.:)

[jpestrada115]

seems this replica not as smooth as other mugen replica, but better than nothing :thumbsup:
i believe this is a custom kit, not as mass production

agree - a bit rough compared to the real thing but still hot as hell!:D

the dominator kits are actually mass produced now in manila, philippines by a number of shops - all fiberglass at the moment though. the kit would cost around AUD1,000 - 1,500 painted and fitted to the car but doesn't include the relocation of the exhaust.

[Sherweeeny]

Nice car Sherweeny.

lol thanks?

[dmx]

Car PC (1.6Ghz Intel Atom running Centrafuse frontend, GPS, Bluetooth, WLAN, Reversing Camera, Steering wheel controls)
...

Carputer :thumbsup:

[black8thgen]

those are insane mods mate... ok well the carpc is at least =]

[ej20i]

YO GUYS...i got MY KIT TODAY!!!!400$$$$ AND THEY FIT PERFECT....well after all its a replica but im more than happy with my fitting...painted it my self...matt black...thought something different...to get yours painted and fitted is 1000$ al up...bad news...ONLY 3 LEFT!!!well 2 NOW!!!hhahahha
and they are not bringing it in again!!!Its up at around hurtsville...well around 10 minutes from hurtsville...

[kazam]

K&N Short Ram Air Intake

Mugen Sports Exhaust

where did u buy those 2 from?

[markCivicVti]

What does it include? The full kit? As in rear spoiler and front grill with the full lip kit? Or just the lip kit.

Congrats mate.. I'm just happy ur not in brisvegas... so far i've only seen one full mugen kit here.. and thats me :D

[black8thgen]

its just the lip kit, no grill no wing. =].

im getting my hands on this kit now too. FINALLY! hehe =]

[deepulse]

where did u buy those 2 from?

I got the K&N from ebay and the mugen exhaust from JDMConcept here, its in the traders section, great guy and i've never had a problem with him :)

[kazam]

how's the SRI sound?

and do u still happen 2 have its link?

[jpestrada115]

YO GUYS...i got MY KIT TODAY!!!!400$$$$ AND THEY FIT PERFECT....well after all its a replica but im more than happy with my fitting...painted it my self...matt black...thought something different...to get yours painted and fitted is 1000$ al up...bad news...ONLY 3 LEFT!!!well 2 NOW!!!hhahahha
and they are not bringing it in again!!!Its up at around hurtsville...well around 10 minutes from hurtsville...

just wondering, did you buy your kits from the ebay seller "stylish bodykits"?

[FallenAngel]

hey ej20 what comes with the kit?

[dmx]

YO GUYS...i got MY KIT TODAY!!!!400$$$$ AND THEY FIT PERFECT....well after all its a replica but im more than happy with my fitting...painted it my self...matt black...thought something different...to get yours painted and fitted is 1000$ al up...bad news...ONLY 3 LEFT!!!well 2 NOW!!!hhahahha
and they are not bringing it in again!!!Its up at around hurtsville...well around 10 minutes from hurtsville...
400 ?? 400 ?? 400 ?? :thumbsup::thumbsup::thumbsup:
the cheapest Mugen replica kit ever known.
fitting ? DIY !!! medium easy, esp. ABS material.
painting ? don't matt black. looks funny. just B92P and DIY, prob. only cost u 200-250:D
unless you want matt black, but the wholecar need to be matt black too, like current trend :D
http://i171.photobucket.com/albums/u283/jasperdmx/viewimage3.jpg
http://i171.photobucket.com/albums/u283/jasperdmx/viewimage7.jpg


hey ej20 what comes with the kit?
dont bother him, he too busy now !!!:D

LAST mods, i reckon :o
rear 303mm rotor with bracket plus EBC Greenstuff
http://i171.photobucket.com/albums/u283/jasperdmx/rear.jpg
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/ebc.jpg

[dmx]

New mod :D

http://a1.vox.com/6a00fad697b9e800040109811b0481000c-500pi

:thumbsup::thumbsup:
Now, need BBK to fill the space inside the rim :thumbsup:

[denot]

:thumbsup::thumbsup:
Now, need BBK to fill the space inside the rim :thumbsup:

dmx, u kno how expensive bbks are... :p

[ej20i]

the kit came with front side and rears only...
and i painted it in matt black already...the front...it looks mean, the rear...TBH...it kinda looks MYEH!prolly get it painted later on

[SaBReT00tH]

wow Brabus looks amazing. Is that in the US?

[warwick108]

brabus is mercedes.. which is on top of amg.. if I remember right.. dont see much is aus.. but you do seem them now and then.. =)

[air23box]

brabus is mercedes.. which is on top of amg.. if I remember right.. dont see much is aus.. but you do seem them now and then.. =)

Nah....they are just like mugen and spoon for mercs......but Brabus do Ferrari and Poshes too.....which is like apex or HKS in Jap......:p

[cracker]

i saw a brabus M class...its supercharger was the loudest thing ive heard

[ekdez]

Mods I'm going to do:
Buddyclub/Skunk2 Coilovers

what coils have buddyclub released for fd?

[deepulse]

how's the SRI sound?

and do u still happen 2 have its link?

the SRI sounds like sex :D i dont have the link for mine but theres are the exact same, i bought mine before the dollar crashed

link one (http://cgi.ebay.com/ebaymotors/K-N-Typhoon-ShortRam-Air-Intake-06-07-08-Honda-Civic_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el117 7QQhashZitem370128289578QQitemZ370128289578QQptZMo torsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)

link two (http://cgi.ebay.com/ebaymotors/K-N-TYPHOON-SHORT-RAM-INTAKE-CIVIC-1-8L-06-08-SILVER_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el11 77QQhashZitem200287957342QQitemZ200287957342QQptZM otorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)


what coils have buddyclub released for fd?


Buddy club have the n+ for the civic fd1 :)

just got back to canberra so i'll get a camera and take some pics hopefully this weekend :)

[denot]

^^^ thanks for the links man... too bad its for FD1, again... :(

[rk 86 wa]

^ the fd1 and fd2 coilovers are exactly the same denot, only the fd2r ones differ i think

[denot]

^^^ ah sorry, what i mean is the "links" which are for the SRI

[dmx]

dmx, u kno how expensive bbks are... :p
yeah..., BBK is the most exp in simple mods-aesthetic (note: simple mods, means not incl. engine).btw, just do one by one first.
1. rims+lowered
2. Bodykit(s)
3. BBK
and add some small things in between..:D


wow Brabus looks amazing. Is that in the US?

brabus is mercedes.. which is on top of amg.. if I remember right.. dont see much is aus.. but you do seem them now and then.. =)

Nah....they are just like mugen and spoon for mercs......but Brabus do Ferrari and Poshes too.....which is like apex or HKS in Jap......:p
OOT :
we have Brabus official branch at south melb. so VIC ppl might lucky enough to spot some brabus merc:p
Brabus is like Mugen (honda) which dedicated to merc only.
only Hamman/Alpina/project kahn/ which also do mix tuning to merc/ferarri/porsche/bmw/etc
Normally porsche go with gemballa and Ferarri with novitec rosso:thumbsup:
(we also have gemballa here in QLD :D
apex and HKS is not a tuning house* ;)
*which can supply most of car parts - interior (seat-pedal-knob-etc)/ext (bodykit-exhaust-rims-susp-etc)

[dmx]

wow Brabus looks amazing. Is that in the US?

i think, it's weird..well personal pref. but don't like the matt finish, but can save ur wax..lol
OOT : another matt :(:(
http://www.carzi.com/wp-content/uploads/flat-gold-nissan-gtr-1.jpg
http://www.carzi.com/wp-content/uploads/flat-gold-nissan-gtr-2.jpg
http://www.carzi.com/wp-content/uploads/flat-matte-black-bugati-veyron-1.jpg
http://www.carzi.com/wp-content/uploads/flat-matte-black-bugati-veyron-2.jpg
http://www.carzi.com/wp-content/uploads/2008/12/specialty-car-craft-phantom-1.jpg
http://www.carzi.com/wp-content/uploads/2008/12/specialty-car-craft-phantom-4.jpg
http://www.carzi.com/wp-content/uploads/2008/12/matte-white-ferrari-599-gtb-22.jpg
http://www.carzi.com/wp-content/uploads/2008/12/matte-white-ferrari-599-gtb-3.jpg

eghhhhhh....:confused:

[dmx]

after lose some weight coz front BBK upgrade,
for rear BBK upgrade cost me some weight gain...erghhh:thumbdwn:
with 303 mm rotor and EBC greenstuff
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/rearbbk.jpg

[denot]

dmx can the green stuff fit oem brake? how does it performs?

[ej20i]

dmx, now u can stop!!!!all u need now is TURBO!

[black8thgen]

sorry to sound like a douche.. but whats BBK? =[.

and i just got my mugen kit paid.. so theres one left, and that one is up for auction on ebay atm. if anyone wants one.. GET IT NOW!

[markCivicVti]

my guess is "Big Brake Kit".

[warwick108]

the matt finish is made to save weight.. haHAHAHAa..

[dmx]

dmx can the green stuff fit oem brake? how does it performs?
yupe, my fren use for stock rear FD, but i forgot what series, i think it's for prelude ones.


dmx, now u can stop!!!!all u need now is TURBO!

ej201, ur car too fast!!all u need now is BBK !
lol.. nope for turbo, won't play with engine anymore, also turbo is non-aesthetic mods..lol my eyes can't see where my money goes.:D


my guess is "Big Brake Kit".
:thumbsup:


the matt finish is made to save weight.. haHAHAHAa..
remind me to junk cars at wreckers..lol

[ej20i]

hahhaha...well, cant afford bbk...btw...herd that u can source jdm type r signal lights?

Heres my kit...i know that some of you will laugh...but o well i like it!

http://i193.photobucket.com/albums/z257/ej20i/DSC_0004-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0006-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0007.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0012.jpg

[TurBIce]

that looks pretty cool!!!!

[BC8]

ur kit's sprayed in matt black aye?

it will look better if its sprayed to match the car

nevertheless, looking good mate. Like the duck tail and kuro rims !

[ej20i]

yea....i dont want to have it colour coded like everyone else...i was thinking of something different and i quite like it actually..

[dmx]

hahhaha...well, cant afford bbk...btw...herd that u can source jdm type r signal lights?

Heres my kit...i know that some of you will laugh...but o well i like it!


not bad at all mate !!!:thumbsup:
my bro's TLC100 also have kind of diff color compare the bodycolor, looks cool too (green and slightly lighter green- lexus copycat he said..lol)
nice nice nice :thumbsup:

but i see an "echo" at other side...lol
http://i193.photobucket.com/albums/z257/ej20i/DSC_0012.jpg

jdm type-signal light ? ur fren just snatched from me...lol
love it, very nice indeed the signal.:thumbsup:

[BC8]

yeah, prob wont see another kit sprayed matt.I guess it would look alot different in real life compared to the photos anyway :)

Was it a home job?

[ej20i]

yea thats my bros FD...with 17s Type M Lenso and thats all done to it and the carbon inter from you...would i be able to get my hands on those jdm signals?

yea it was a home job diy

[amurray]

looks really neat man... owwww guess what just got here from singapore!!!! WOOOO finaly.

[ej20i]

ummmm TURBO!??!??!?!?!

[JOhnnyFD]

hahhaha...well, cant afford bbk...btw...herd that u can source jdm type r signal lights?

Heres my kit...i know that some of you will laugh...but o well i like it!

http://i193.photobucket.com/albums/z257/ej20i/DSC_0004-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0006-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0007.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0012.jpg

niicee... what exhaust catback did u get?

[rk 86 wa]

ej20i looking very schmick :)

[ej20i]

Thanks guys, im using xforce twin loop

[JOhnnyFD]

Thanks guys, im using xforce twin loop

niicee... im wanting to get myself the mugen twinloop silencer but heard the replica x-force is just as good and cheaper:thumbsup:

[rk 86 wa]

is that from our cat all the way back? one muffler? how does it sound etc?

[denot]

ej would you mind sharing the cost of the catback (or muffler?)

[JOhnnyFD]

ej would you mind sharing the cost of the catback (or muffler?)

ye... i know toda aus supplies x-force... any1 else??

[funkdr]

ej20i i like that matt black looks awesome

[ej20i]

yay!!!ppl likes the matt black look!!!hehehhehe
i got the muffler for 280 but it was from my exhaust guy and he's really nice to me...and for xhaust wise...he got me a new pipe with the resonator GONE! for free hehehehe
so i paid 280 all up!

[black8thgen]

thats awesome, which exhaust guy do u go too =]. and whered you get your rear ducktail from?

my kit is getting delivered TMRW! hopefully.. haha. install this weekend if all goes well =].

[rene]

Nice Car EJ!, we should do photo shoot sometimes! I am gathering couple FD's right now for the session, any of you guys be interested? fully sick fd's that is :P all welcome actually.


hahhaha...well, cant afford bbk...btw...herd that u can source jdm type r signal lights?

Heres my kit...i know that some of you will laugh...but o well i like it!

http://i193.photobucket.com/albums/z257/ej20i/DSC_0004-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0006-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0007.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0012.jpg

[ej20i]

im interested!..not so far please

[denot]

I'm interested as well... but mine is not that "fully sick" :(

[black8thgen]

im interested! but i've only got a stock fd2 with mugen lip kit atm.. =[

[markCivicVti]

Mine is fully sic... (imo lol) but not in nsw :(

[rene]

lol as I said all FD's are welcome! fully sick or not...mine is not fully sick but hey here I am! lol.

I am thinking to do it somewhere around willoughby? I am open for suggestion as long its in NSW.

[denot]

im interested! but i've only got a stock fd2 with mugen lip kit atm.. =[

hahaha yours might be better than mine mate! Mines only got a stock FD2 with replica CTR wing and 18" :p

[JOhnnyFD]

i'm interested:D... but i wont get my typeR kit with carbon fibre wing til next month... ive only got so far r my 18" rims and tyres... and thinkin of whether i should get the mugen/x-force twinloop exhaust sometime soon... carbon fibre hood??? ehhhh??:confused:

sugguested photoshoots >>> olympic park, homebush (me and my friends did a photoshoot there, really nice with the lights at night)

[markCivicVti]

tweed heads is in nsw... i can drive there from here :P

[ej20i]

lol as I said all FD's are welcome! fully sick or not...mine is not fully sick but hey here I am! lol.

I am thinking to do it somewhere around willoughby? I am open for suggestion as long its in NSW.


urs is not fully sick rene???are i serz???!!!!hahhahaha

[denot]

anywayyyyyy
i was thinking of meet up @ somewhere quiet? Kellyville sounds good :p

[ej20i]

KELLYVILLE SOUNDS GREAT!!!!!!i like rouse hill at nite...at CIVIC WAY!!!hahhaha

[denot]

^^^ hmmm is Civic Way the one inside a bus depot or sumthing like that?

[BC8]

i'll join you guys with my fully sick stock FD1 :) haaha

[JaCe]

KELLYVILLE SOUNDS GREAT!!!!!!i like rouse hill at nite...at CIVIC WAY!!!hahhaha

lol ultra near to us!

[black8thgen]

noooooo! willoughby :L. sounds awesomee hahaha

[cracker]

willoughby is hektikkkk!!

[cracker]

furthermore does anybody know who can hook me up with some H.I.D's? mine have ****ed up

[jem.142]

rousehill sounds awesome! decent outside parking lot aswell ... ohh yeh and its heaps close 2 me =]

[denot]

k lets open a new meetings thread? and vote?

[FallenAngel]

and track the car =]

[JOhnnyFD]

k lets open a new meetings thread? and vote?

FD Meetup.. ye!:thumbsup:

[denot]

so? who wants to open the FD cruise thread? :p

[denot]

Guys, just want to share some info... the Angel Eyes for Civic FD with R8 looks, is available from Eagle Eyes Auto Lamp Centre... for RM1,500
http://www.eagleeyes-asia.com
unfortunately you have to register to see the product, but just want to share this info ^_^

[JaCe]

Guys, just want to share some info... the Angel Eyes for Civic FD with R8 looks, is available from Eagle Eyes Auto Lamp Centre... for RM1,500
http://www.eagleeyes-asia.com
unfortunately you have to register to see the product, but just want to share this info ^_^

Dude that's bloody expensive. RM1,500 is about $650-700aud! Thanks for sharing though :) It seems there's a few shops (also in Australia) who are trying to sell the eagle eyes at a huge premium over the street price in Asia.

I bought my tail lamps from SpeedLine off eBay and have the highest regard for their quality and they offer reasonable prices (note: since I bought my headlamps, the AUD has depreciated considerably so they may not be so price-effective after all). Reason I raise this is because they also sell Eagle Eyes for RHD without the HID lamps (just the module and standard halogens- you need to buy your own HIDs).

On another note, in Singapore the shop McWell's Ventures are selling Eagle Eyes which have been tested and met the local design standards and have the approval of the Singapore equivalent to the RTA! They charge a slight premium over other shops but they can offer their customers a copy of the certification to prevent any conflicts with local law enforcement! Imagine if we had something like that here...!

[markCivicVti]

My mod for this weekend:

front
http://a6.vox.com/6a00fad697b9e800040109d07b7cae000e-500pi

and back

http://a1.vox.com/6a00fad697b9e800040109815d3e11000d-500pi

[NightRyder]

hey buddy, that area you live in looks awfully familiar!... :D ..or it is just me...LOL


hahhaha...well, cant afford bbk...btw...herd that u can source jdm type r signal lights?

Heres my kit...i know that some of you will laugh...but o well i like it!

http://i193.photobucket.com/albums/z257/ej20i/DSC_0004-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0006-1.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0007.jpg

http://i193.photobucket.com/albums/z257/ej20i/DSC_0012.jpg

[black8thgen]

wow mark, thats awesome. How'd you do it? Hmm ireally wanna do that to my calipers =].

btw: just installed my interior neons/LED's =]. Simple job hehe. cant wait to get my mugen kit installed =].

[ej20i]

umm its kellyville, u live around here?

[NightRyder]

I use to live in kellyville/beaumont hills with the family...

Nice area...


umm its kellyville, u live around here?

[dmx]

Guys, just want to share some info... the Angel Eyes for Civic FD with R8 looks, is available from Eagle Eyes Auto Lamp Centre... for RM1,500
http://www.eagleeyes-asia.com
unfortunately you have to register to see the product, but just want to share this info ^_^

US$350 from www.civicdrm.co.nr shipped :p

[denot]

^^^ wow its available from your friend too dmx? :p

[dmx]

^^^ wow its available from your friend too dmx? :p
by request only. he gettin' lazy and lazy to do the business..lol

[denot]

^^^ lol but its the R8 style right?

[rk 86 wa]

http://i353.photobucket.com/albums/r384/milba1112/DSC_0044-1.jpg

http://i353.photobucket.com/albums/r384/milba1112/DSC_0047-2.jpg

holds me well :)

[dmx]

^^^ lol but its the R8 style right?
not only R8 style, but all audi now like that..:D

lower grille mesh (de-kitting if wanted)
http://i171.photobucket.com/albums/u283/jasperdmx/ozhonda/low.jpg

[dmx]

Holds me well :)

bride always hold groom well...;)

[rk 86 wa]

haha :P yes they do

[black8thgen]

ur car is so ****ing hot lol. can you hook me up with the extra front lip?