Your Mods To 2006-2011 FD Civics

[Honda_FD]

What's the best bang for buck stereo mod? I just want more bass really and am a noob at ICE. (But meth I'm an expert)

Planning on keeping the OEM Headunit?
If so, And you want more bass then get a Amp + Sub.
Since out headunit does not have output RCAs you will need a low level converter.
Some amps have them built in, Making life alot easier but you can just pick up a branded one for about $100

If you plan on changing the headunit then wait and do it all at once. Saves money and time

[threesix]

Yeah, gonna keep the head unit. Is that a big job to fit an aftermarket one anyway?

Amp and sub sounds good. I don't want ear melting bass... Just some more oomph. Would a head unit change give me that much extra bass with the stock speakers??

I remember when I first joined here there was a stereo cheat where you held down/pushed certain and it made the stock system bump more. Anyone remember what it was??? Cause since then I've had the battery replaced and doesn't that reset all settings?

So many questions. Sozzy. Lol

[Honda_FD]

Yeah, gonna keep the head unit. Is that a big job to fit an aftermarket one anyway?

Amp and sub sounds good. I don't want ear melting bass... Just some more oomph. Would a head unit change give me that much extra bass with the stock speakers??

I remember when I first joined here there was a stereo cheat where you held down/pushed certain and it made the stock system bump more. Anyone remember what it was??? Cause since then I've had the battery replaced and doesn't that reset all settings?

So many questions. Sozzy. Lol

Changing the headunit alone without a sub will not make the stock speakers pump out more bass.
You might get a bit better sound quality but not more bass. If you're not a massive basshead then I would recommend something around the 600w RAMs range.
Most amps have a Sub control now anyways. You can adjust the bass like the volume knob

[nedkerry]

Yeah, gonna keep the head unit. Is that a big job to fit an aftermarket one anyway?

Amp and sub sounds good. I don't want ear melting bass... Just some more oomph. Would a head unit change give me that much extra bass with the stock speakers??

I remember when I first joined here there was a stereo cheat where you held down/pushed certain and it made the stock system bump more. Anyone remember what it was??? Cause since then I've had the battery replaced and doesn't that reset all settings?

So many questions. Sozzy. Lol

If you buy an OEM fascia kit, it's a pretty straight forward job to switch the head unit around - a couple of hours, tops. eBay kits are luck of the draw. Some of them fit well, some of them don't.
Upgrading the head unit will give you an overall cleaner signal and delivery of sound. Bass will sound a lot better, and you'll be able to adjust more bass settings. For example, on my stock unit, I had bass turned up to +4, volume on 8 to 12, and when I played a bassy track like Markus Schulz - Love Rain Down, I could hear the speakers popping and bass sounding like balls.
I replaced it with a $200 head unit and the output was so much better at similar volumes. There were more bass customisations and it allowed me to really enjoy my music more.
In saying that though, if you turn it up really really loud (equivalent to volume 15-20 on stock), it's going to struggle, and that's when you'll need a sub.

If you're only out to achieve louder bass, but not cleaner bass, go for the sub.
Otherwise, upgraded head unit is best bang for buck as it improves overall sound quality.

[darktmt]

Hey guys need help ASAP !!!!
took out stock strut to put in coil overs but the assembly is stuck in POSITIVE CAMBER AND I CANT PUT THE LAST BOLT IN.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/10325379_591132041001049_1603865197721681075_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10371957_591141837666736_4940733298876154133_n.jpg

People been saying pull out the disc and rotate till you hear a click to allign the CV splines but its not working!

[jprak]

Use a jack to hold the disk and lift it so you can bolt it

Think that's what I did I think

[Stevil]

Yep CV shift has popped out, if you put weight on it ?? Then you may have put a burr on the end of the shaft and you will find it almost impossible to get back in ! CV will need to be removed and serviced, if you didn't put weight on the wheel then get somebody like a mobile mechanic to drop in an fiddle with it, they should be able to get it back in.

[threesix]

dudes!! thanks so much for the info and advice. love you ozhomos. xoxoxo

i think i will go for a head unit upgrade as it sounds best bang for buck.

what do you guys have? and pics??

thanks again!!!!

sorry if this should have been in the audio section.

[threesix]

changing the front speakers to aftermarket would be fairly cheap yeah?

[darktmt]

@stevil, The CV shaft spline popped out, posted this picture on the mighty car mods forum and someone came over at 2am in the morning. Its fixed now !

[nedkerry]

changing the front speakers to aftermarket would be fairly cheap yeah?

Yeah it'll range from $80 - $200 depending on quality.
JB Hi Fi have 30% off car audio until Sunday so it's a good opportunity to pick something up. If you change your mind, just return it later :P

If you're working on a budget, start with the head unit first and if you're still not satisfied, update the speakers to something that'll push out more air/more bass.
I haven't opened up my door trim to check our speakers, but on my girlfriend's GD1 Jazz, the stock speakers were as fragile as a piece of paper and the quality reflected that, so there was an urgency to replace them.

[threesix]

thats what i was thinking. although the hybi comes with different seat and all the fruit im sure the speakers are they same doo doo paper thin speakers.

gonna hunt for a new head unit first for sure.

thanks again dude!!!

[threesix]

2006 HONDA CIVIC 4DR SEDAN WITH 1.3L HYBRID ENGINE AND STANDARD AUDIO SYSTEM

Speaker Specifications


Location Size Depth

Front Speaker 6.5 3

Front Tweeter 1.25 2

Rear Speaker 6.5 3

2006 HONDA CIVIC 4DR SEDAN WITH STANDARD AUDIO SYSTEM

Speaker Specifications


Location Size Depth

Front Speaker 6.5 3

Front Tweeter 1.25 2

Rear Speaker 6.5 3

[curtis265]

yeah best upgrade is the heatunit only as a first step, when you pump more power into speakers it tends to really boost clarity

[Stevil]

darktmt good result !! what I described is actually what I did to my car, yep I popped the CV spline out and thought Id whack the wheel back on and massage it back into place !! not very smart I burred it badly and had to get it fixed ! lol best bet is to get another jack n support the hub/brakes so it wont pop out.

[jprak]

http://img.tapatalk.com/d/14/05/15/ru3a9y5a.jpg

This my cockpit guys, was bored so took a pic

Heard from tyre king in my area that someone from melb came down and deposit on the fd2r front end and some interior parts

Got sad. Told him if the guy doesn't buy the armrest I'll buy it. Only thing missing in my car =|

[stevo1210]

http://img.tapatalk.com/d/14/05/15/ru3a9y5a.jpg

This my cockpit guys, was bored so took a pic

Heard from tyre king in my area that someone from melb came down and deposit on the fd2r front end and some interior parts

Got sad. Told him if the guy doesn't buy the armrest I'll buy it. Only thing missing in my car =|

Be ghetto and paint armrest black lol. Y U ALWAYS AT HUNGRY JACKS CABRA?

LOL

[stevo1210]

What's the best bang for buck stereo mod? I just want more bass really and am a noob at ICE. (But meth I'm an expert)

Bass works kit from Honda. Worst bang for buck but OEM. LOL

I got it. Makes deeper bass but no where near a sub - cost around $550.

[jprak]

Be ghetto and paint armrest black lol. Y U ALWAYS AT HUNGRY JACKS CABRA?

LOL


LOl i was only there once

[lolmclol]

Jprak nightly HJ visits

(-;

[jprak]

Jprak nightly HJ visits

(-;

hehe headjob... gotcha ;D

[lolmclol]

hehe headjob... gotcha ;D

That's why you need the black arm rest, no stains, no evidence ;D

[darktmt]

Anyway guys after the incident i return back to stock as i was too scared to put on the coil overs so im selling them.

if anyone in QLD want to buy BC coil overs FRONT ONLY contact me!

or if anyone in melb or sydney want to buy im driving down on the next month!

ILL SELL CHEAP!

[jprak]

Anyway guys after the incident i return back to stock as i was too scared to put on the coil overs so im selling them.

if anyone in QLD want to buy BC coil overs FRONT ONLY contact me!

or if anyone in melb or sydney want to buy im driving down on the next month!

ILL SELL CHEAP!

really? if youre scared let a mechanic do the job for ya... such a waste :(



That's why you need the black arm rest, no stains, no evidence ;D

ah yea you get me

sighs...we're meant to be <3

[lolmclol]

Yeaaaah baby

[darktmt]

@jprak got no money man.. :( gotta save up for my trip down to syd and melb haha
not sure how much to sell it for, probs sell for $300

[nedkerry]

For those in Victoria, come to the Garage Cafe opening tonight :)
https://www.facebook.com/events/831875176842006/

I'll be frequenting the Estblshd stand in an Adventure Time tshirt and beanie. Come say hi! :D

[Honda_FD]

dudes!! thanks so much for the info and advice. love you ozhomos. xoxoxo

i think i will go for a head unit upgrade as it sounds best bang for buck.

what do you guys have? and pics??

thanks again!!!!

sorry if this should have been in the audio section.

I have a Genuine Facia Kit. Perfect fit with a Alpine Doubledin headunit.
Front - 6.5" Soundstream rbc.6 80w rms - Powered by an 120w RMS Amp
Rears - 6" Alpine Type S - No Amp
Bass - Alpine 1000w RMS Type R Sub in a Alpine ported box to suit the sub.
Powered by an Alpine X-Power 1100w RMS Amp.

http://i194.photobucket.com/albums/z236/crazyazn312/1240461_10151669248515794_1826335320_n.jpg

[chrischris]

Anyone know where i can source an oem front badge cheap? Haven't had much luck on ebay.
It fell of the other night :(
http://i.imgur.com/aC6e01w.jpg

[nedkerry]

I have a spare grille that comes with the badge if you want :)
$25?

[chrischris]

I have a spare grille that comes with the badge if you want :)
$25?

PM sent

[Honda_FD]

Anyone know where i can source an oem front badge cheap? Haven't had much luck on ebay.
It fell of the other night :(

Honda World or Honda Wrecker in Clayton?
Honda world has a few FDs. I got some stuff off it a few times

[chrischris]

Honda World or Honda Wrecker in Clayton?
Honda world has a few FDs. I got some stuff off it a few times

Thanks, i have them a call this morning but they had no badges available. I picked up the front grille from @nedkerry :)

[nedkerry]

I picked up onion rings from Chris :)

Honda_FD, were you Garage Cafe tonight? Did they announce your car being illegally parked? lol

[iou]

What is your next mod guys. I'm thinking whether to get rear sway bar or auto power folding mirrors.

[curtis265]

What is your next mod guys. I'm thinking whether to get rear sway bar or auto power folding mirrors.

sway bar

[Honda_FD]

I picked up onion rings from Chris :)

Honda_FD, were you Garage Cafe tonight? Did they announce your car being illegally parked? lol

My brother went with the Civic lol. ****en idiot. I'll ask him later

@IOU If you like to run around and do heavy cornering then Sway bars.
If you like to cruise then sound system :)

[*DAN*]

IOU, go with the sway bar imo, nothing more fun than taking corner without slowing down much ;)


Has anyone here registered for that Honda Network meet? Just sent mine in, trying to see else i should be expecting there :D

[Honda_FD]

Has anyone here registered for that Honda Network meet? Just sent mine in, trying to see else i should be expecting there :D

George replied to me saying he's received my registration but nothing has been confirmed yet.

He also left me a message: "P.S. Who the **** is Ben?" haha! Made me lol


Pics of new setup?


Also, Why are my swear words coming up as stars? :(

[Stevil]

iou whats ya location ? I have a custom built 18mm RSB looking for a home (free B-) ) , Just needs new bushes and bracket ($50) if ya local ..........

I track my car so I ended up with Cusco F&R as they were a smidge stiffer.

[*DAN*]

iou whats ya location ? I have a custom built 18mm RSB looking for a home (free B-) ) , Just needs new bushes and bracket ($50) if ya local ..........

I track my car so I ended up with Cusco F&R as they were a smidge stiffer.

Hey dude, is your axleback still for sale? $200 posted to melbourne as well or? Might be interested if i can get rid of my varex


George replied to me saying he's received my registration but nothing has been confirmed yet.

He also left me a message: "P.S. Who the **** is Ben?" haha! Made me lol


Pics of new setup?


Also, Why are my swear words coming up as stars? :(

hahaha only because youve asked five times in this thread. Still need to lower and put negative camber in the front since its on positive atm

http://i811.photobucket.com/albums/zz38/omgeeitsdaniel/IMG_4210.jpg (http://s811.photobucket.com/user/omgeeitsdaniel/media/IMG_4210.jpg.html)

http://i811.photobucket.com/albums/zz38/omgeeitsdaniel/IMG_4203.jpg (http://s811.photobucket.com/user/omgeeitsdaniel/media/IMG_4203.jpg.html)

[Honda_FD]

Hey dude, is your axleback still for sale? $200 posted to melbourne as well or? Might be interested if i can get rid of my varex

hahaha only because youve asked five times in this thread. Still need to lower and put negative camber in the front since its on positive atm

Looks good!
New muffler? Why not use the Varex?

[nedkerry]

IOU, go with the sway bar imo, nothing more fun than taking corner without slowing down much ;)


Has anyone here registered for that Honda Network meet? Just sent mine in, trying to see else i should be expecting there :D

Yeah I registered, but haven't heard anything back.
*Fingers crossed we all get in * :)

[Honda_FD]

Yeah I registered, but haven't heard anything back.
*Fingers crossed we all get in * :)

Lol IF we all make it in. All ask my friends to try get us a spot together

[*DAN*]

Looks good!
New muffler? Why not use the Varex?

Thanks dude!

Decided i didnt want anything too loud since its an auto. Want to go with the subtle route with this car (besides the blue rim lol)

[iou]

iou whats ya location ? I have a custom built 18mm RSB looking for a home (free B-) ) , Just needs new bushes and bracket ($50) if ya local ..........

I track my car so I ended up with Cusco F&R as they were a smidge stiffer.

Thanks man but i think i'm gonna get the Cusco rear sway bar, dont want the front one cause not much different compare to the stock one.

[iou]

http://i811.photobucket.com/albums/zz38/omgeeitsdaniel/IMG_4210.jpg (http://s811.photobucket.com/user/omgeeitsdaniel/media/IMG_4210.jpg.html)

http://i811.photobucket.com/albums/zz38/omgeeitsdaniel/IMG_4203.jpg (http://s811.photobucket.com/user/omgeeitsdaniel/media/IMG_4203.jpg.html)

Nice mods. Black on black. That's my style as well. We are "Men In Black", lol

[jprak]

hey guys

no more FD owner...just traded it in for a 1.5L i-vtec honda city

will be getting a modulo kit for it

[SharkChu]

hey guys

no more FD owner...just traded it in for a 1.5L i-vtec honda city

will be getting a modulo kit for it

wot...

[Honda_FD]

hey guys

no more FD owner...just traded it in for a 1.5L i-vtec honda city

will be getting a modulo kit for it

Late April fools?

[stevo1210]

hey guys

no more FD owner...just traded it in for a 1.5L i-vtec honda city

will be getting a modulo kit for it

not sure if srs.

[jprak]

not sure if srs.


Late April fools?


wot...


AHAHAHHA only half right...mum just ordered the new 2014 honda city.....to be honest...i actually like it

http://www.gettinlow.com/wp-content/uploads/2013/12/honda-new-city-putih-07.jpg

[Honda_FD]

AHAHAHHA only half right...mum just ordered the new 2014 honda city.....to be honest...i actually like it

We were supposed to get one instead of the FD.
Wouldnt mind either.

[Stevil]

Tanabe muffler sold

[curtis265]

i couldn't rock a city

something about micro sized sedans just look awkard

[Honda_FD]

Should have told your mum to wait and get the Civic Hatch turbo haha

[nedkerry]

i couldn't rock a city

something about micro sized sedans just look awkard

yeah i'm with you there.
I saw a new City with what I assumed was a Modulo kit at my local Honda and it looked like all sorts of strange - reminded me of an outdoor TV antenna.

[jprak]

yeah i'm with you there.
I saw a new City with what I assumed was a Modulo kit at my local Honda and it looked like all sorts of strange - reminded me of an outdoor TV antenna.


Should have told your mum to wait and get the Civic Hatch turbo haha



i couldn't rock a city

something about micro sized sedans just look awkard




ahahahah guys...trust me if it was me..would of picked a civic sedan 9th gen...but for its price not worth it.

im waiting later on when someone wrecks their modulo honda city so i can take the kit off it ;)

http://geartinggi.com/wp-content/uploads/2014/02/Honda-City-Modulo-2014.08.jpg

http://www.motortrader.com.my/news/wp-content/uploads/images/2014/03/City-Modulo-version.jpg

will go wingless on her car ;D

[chrischris]

roof wing arrived :)

http://i.imgur.com/eqj33U6.jpg

[curtis265]

ahahahah guys...trust me if it was me..would of picked a civic sedan 9th gen...but for its price not worth it.

im waiting later on when someone wrecks their modulo honda city so i can take the kit off it ;)

http://geartinggi.com/wp-content/uploads/2014/02/Honda-City-Modulo-2014.08.jpg

http://www.motortrader.com.my/news/wp-content/uploads/images/2014/03/City-Modulo-version.jpg

will go wingless on her car ;D

Nice tissue box

[chrischris]

anyone have a boot lip they would sell cheap?

@Honda_FD didn't you have one a while back?

[Honda_FD]

anyone have a boot lip they would sell cheap?

@Honda_FD didn't you have one a while back?

I do but still contemplating whether to get it painted and glued on.

Nice roof spoiler. Did you glue it on? Im thinking of gluing mine on but not sure if it can be removed afterwards?
I tried double sided tape but wouldnt stay on

[Stevil]

All this wing talk got me a bit excited, So lasted nite my fd got some carbon fibre love, more function over form, will post pics later.

[chrischris]

it came pre lined with 3m tape and a prep liquid. I gave it a wash with alcohol wipes, then the prep stuff. Seems to stay on quite strong.

How much would you sell it for? Or maybe swap for modulo spoiler? I'm still undecided if i should leave it how it is, thats why id want a cheap boot lip to try it out. I already got a can of alabaster silver to colour match the grille i got from @nedkerry

[jprak]

All this wing talk got me a bit excited, So lasted nite my fd got some carbon fibre love, more function over form, will post pics later.


carbon boot?
carbon bonnet?
carbon front end?!


damn what a teaser... ;)

[NeedVtec]

Just installed a k&n typhoon, low end took some damage but mid-high feels like I gained a pony or 2. Bloody loud now too.
Install was straight forward, only headache was trying to position it so everything lined up.

[Honda_FD]

it came pre lined with 3m tape and a prep liquid. I gave it a wash with alcohol wipes, then the prep stuff. Seems to stay on quite strong.

How much would you sell it for? Or maybe swap for modulo spoiler? I'm still undecided if i should leave it how it is, thats why id want a cheap boot lip to try it out. I already got a can of alabaster silver to colour match the grille i got from @nedkerry

If I were to sell it. I'd probably let it go for about $120. Only because the mounting points have be broken off.
So the spoiler will need to be glued down instead of screwed into the boot lid. Nothing major.
Light scratch in the middle because the boot was up at the wrecker and idiots scratched it.
Will sand out. Which is okay because you will be painting it anyways

[chrischris]

If I were to sell it. I'd probably let it go for about $120. Only because the mounting points have be broken off.
So the spoiler will need to be glued down instead of screwed into the boot lid. Nothing major.
Light scratch in the middle because the boot was up at the wrecker and idiots scratched it.
Will sand out. Which is okay because you will be painting it anyways

Sorry but too much, i know its oem, but on ebay i found some for 50$ link (http://www.ebay.com.au/itm/Unpainted-R-Type-Trunk-Lip-Spoiler-Boot-Wing-for-Honda-Civic-8th-Sedan-2006-2011-/281341765966?pt=AU_Car_Parts_Accessories&fits=Model%3ACivic&hash=item418146a94e&_uhb=1)
link2 (http://www.ebay.com.au/itm/Unpainted-Boot-Wing-Trunk-Lip-Spoiler-for-Honda-Civic-8th-4Dr-Sedan-2006-2011/181401633957?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222003%26algo%3DSIC.FIT%26ao%3D1%2 6asc%3D20140106155344%26meid%3D7026995553999771751 %26pid%3D100005%26prg%3D20140106155344%26rk%3D1%26 rkt%3D6%26sd%3D281341765966&rt=nc)

[jprak]

Sorry but too much, i know its oem, but on ebay i found some for 50$ link (http://www.ebay.com.au/itm/Unpainted-R-Type-Trunk-Lip-Spoiler-Boot-Wing-for-Honda-Civic-8th-Sedan-2006-2011-/281341765966?pt=AU_Car_Parts_Accessories&fits=Model%3ACivic&hash=item418146a94e&_uhb=1)
link2 (http://www.ebay.com.au/itm/Unpainted-Boot-Wing-Trunk-Lip-Spoiler-for-Honda-Civic-8th-4Dr-Sedan-2006-2011/181401633957?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222003%26algo%3DSIC.FIT%26ao%3D1%2 6asc%3D20140106155344%26meid%3D7026995553999771751 %26pid%3D100005%26prg%3D20140106155344%26rk%3D1%26 rkt%3D6%26sd%3D281341765966&rt=nc)

LOL

OEM is bigger than those...i had that on my car..it was ok but didnt stick well under the heat of the sun

[chrischris]

LOL

OEM is bigger than those...i had that on my car..it was ok but didnt stick well under the heat of the sun

any pictures?

[jprak]

http://img.tapatalk.com/d/14/05/20/negyduhe.jpg

http://img.tapatalk.com/d/14/05/20/7y8esata.jpg

Just these I got

[chrischris]

http://img.tapatalk.com/d/14/05/20/negyduhe.jpg

http://img.tapatalk.com/d/14/05/20/7y8esata.jpg

Just these I got

looked good, i wish there was one available that was more pronounced

similar to this but a little less out there

http://www.speedhunters.com/wp-content/uploads/2013/08/86-Day-2013-10.jpg
or this
http://blog.modbargains.com/wp-content/uploads/2013/12/frs-brz-db-style-trunk-spoiler-9.jpg

[Honda_FD]

@Chris
Those ebay spoilers dont look as good as the oem in my opinion.
They're really skinny. Looks weird.

The spoilers you want. Modulo in America has them. They're called Modulo Type R

http://i672.photobucket.com/albums/vv86/kpgd/ap_F23_20100617035402440.jpg

http://www.blogcdn.com/www.autoblog.com/media/2007/12/tas_modulo_civic-15.jpg

http://i672.photobucket.com/albums/vv86/kpgd/21010043582646_508.jpg

[Stevil]

And the towbar will get pulled off on friday so its a wee bit quicker on the track next monday, runnng 6 deg of camber in the rear now and 4 deg in the front, torque steer is loads of fun ! NOT and new 245/40/17 rubber gets debuted on Monday, could probably run 255's up front but Id rather not with only 8.5 rims, really need some 9.5 s lol.

http://madmick3006.com/ahngallery/upload/files/2014-05/4a83c752.jpg

http://madmick3006.com/ahngallery/upload/files/2014-05/4d8fb7d9.jpg

[iou]

http://img.tapatalk.com/d/14/05/20/guza7asy.jpg

[iou]

My one look like this :-)http://img.tapatalk.com/d/14/05/20/ura4ahun.jpg

[Honda_FD]

Should I.....?


https://scontent-b-lax.xx.fbcdn.net/hphotos-ash3/t31.0-8/1617774_10152528428605466_555157299922772060_o.jpg

[lolmclol]

Not sure if serious

[Stevil]

Yeah man ahead of the curve !! I reckon those rims will be all the rage in 5 or 6 years LOL

iou yeah its effin huge, I'd been thinkin about a Wing for quite a while as I've almost run out of things to upgrade that would make the car quicker at the track, really only have shit like spherical bearings, front splitter and better positioning of the air intake to go. As I get a car allowance for the car and leases costs are down to $270/mth theres a little bit of play money every month for silly purchases like this wing, which by the way is 4 years old, at 100kmh it feels like there is 2 chicks in the boot.

and Im on the lookout for a white FD boot as I dont want to daily the wing, so if anybody knows of a front ended white 1 lt me know. here another angle for ya

http://madmick3006.com/ahngallery/upload/files/2014-05/82ba1050.jpg

[iou]

Yep, it's quite big for a daily driving car. It will look more perfect if you have bodykit on. You're gonna track your car so what will be your next upgrade? Sway bars, brake kit, coilover......???

[Honda_FD]

http://madmick3006.com/ahngallery/upload/files/2014-05/82ba1050.jpg

Invest in a bodykit!
It'll look tough as with a full mugen RR or full Type R + Js Racing lip!
Get a carbon boot and Carbon Mugen Hood aswell!

You're the only here going full functional. Show us Carpark Whores how its done!

http://image.hondatuningmagazine.com/f/features/htup_1208_2008_honda_civic_fd1/38215424/htup-1208-02-o%2B2008-honda-civic-FD1%2BJDM-CTR-rear-bumper.jpg

[Stevil]

Shit don't go putting pic's up like that !!

[chrischris]

Should I.....?


https://scontent-b-lax.xx.fbcdn.net/hphotos-ash3/t31.0-8/1617774_10152528428605466_555157299922772060_o.jpg

i think they look alright, maybe do a photoshop mockup. Are they good specs atleast? real 3 piece ?

[Honda_FD]

i think they look alright, maybe do a photoshop mockup. Are they good specs atleast? real 3 piece ?

They're Genuine Carving Tisters.
18x8+35 all round. Specs arent wide but for $640. Not bad lol


Shit don't go putting pic's up like that !!

Lol Whyyy? Its sexy as helllll

[curtis265]

Yep, it's quite big for a daily driving car. It will look more perfect if you have bodykit on. You're gonna track your car so what will be your next upgrade? Sway bars, brake kit, coilover......???

it's so you can see past it

people have thought these things through

[iou]

it's so you can see past it

people have thought these things through

:-)))))))

[chrischris]

Anyone know what the front lip is called? STI lip maybe?

http://ladyonwheels.com/wp-content/uploads/2013/05/Nagib-FD1-2.jpg
source (http://ladyonwheels.com/all-life-is-only-an-experiment-nagibs-civic-fd1/)

[Honda_FD]

Anyone know what the front lip is called? STI lip maybe?

http://ladyonwheels.com/wp-content/uploads/2013/05/Nagib-FD1-2.jpg

Correct. Its a 2007 V-Limited STI Lip.
I was originally going to put it on my car but I couldnt find one. Now they have heaps on ebay lol.
Not sure if it will suit your bumper though.

Might take my lip off and get an STI lip though. The mugen lip is so big and bulgy.
Trying to make the car more OEM+ look

[nedkerry]

http://www.ontherunmotorsports.com/index.php?option=com_content&view=article&id=293:honda-fd-civic-cf-v-lip-for-mugen-style-front-lip&catid=37:exterior&Itemid=71

OTR do them. Kinda tempted, actually.

[threesix]

that STI lip is imo the best looking add on to our fronts. love love love them.

and get those rims for sure honda_FD. 10/10

[chrischris]

Correct. Its a 2007 V-Limited STI Lip.
I was originally going to put it on my car but I couldnt find one. Now they have heaps on ebay lol.
Not sure if it will suit your bumper though.

Might take my lip off and get an STI lip though. The mugen lip is so big and bulgy.
Trying to make the car more OEM+ look

yeah it might not suit my pre face lift :(
I really like the mugen bumper but im afraid i might get pulled up for it as it quite lower than 100mm
and being on springs would cost to much to clear defect as exhaust is lower than 100mm too, without the lip the car doesnt look that low, i went through two booze bus stops with hwy patrol cars there and they said nothing about wheels or ride height

how it looks no until i get the lip colour and grille colour matched
http://i.imgur.com/1oQdOuq.jpg

trial on my old grille colour matched and missing the H badge (wifes car in the back)
http://i.imgur.com/rkoff2M.png

[Honda_FD]

http://www.ontherunmotorsports.com/index.php?option=com_content&view=article&id=293:honda-fd-civic-cf-v-lip-for-mugen-style-front-lip&catid=37:exterior&Itemid=71

OTR do them. Kinda tempted, actually.

Is that CF V-Lip the same as the STI ones?
Not sure about CF as my car is low lol. One bump and that lip will crack and break off.
Thats why I like plastic lips. Only cracks, Doesnt shatter

[jprak]

Is that CF V-Lip the same as the STI ones?
Not sure about CF as my car is low lol. One bump and that lip will crack and break off.
Thats why I like plastic lips. Only cracks, Doesnt shatter


V-lip for mugen 06-08 lip...it extends the mugen lip. friend damage his lip and bumper....

guys...got a surprise...

;)

[Honda_FD]

V-lip for mugen 06-08 lip...it extends the mugen lip. friend damage his lip and bumper....

guys...got a surprise...

;)

So it wont fit on my facelift front?


WHATS THE SURPRISE?!?!?!
AS IF STOP HALFWAY! WHAT A TEASE!

[jprak]

nah...just get a sti lip its universal...


cant get pics atm...too dark <.<

[Honda_FD]

nah...just get a sti lip its universal...


cant get pics atm...too dark <.<

Lol Can we get a hint?

[jprak]

exterior... that is all

[Honda_FD]

exterior... that is all

Lol What a tease!
I'll be expecting a post from you early tomorrow morning!

[lolmclol]

Different colour rear bumper! (-;

[nedkerry]

trial on my old grille colour matched and missing the H badge (wifes car in the back)
http://i.imgur.com/rkoff2M.png

the wheels on your wife's Swift look nice :)


guys...got a surprise...

;)

leaving me hanging...you're just as bad as my girlfriend

[jprak]

http://img.tapatalk.com/d/14/05/22/egehe9u6.jpghttp://img.tapatalk.com/d/14/05/22/epyqurus.jpg



Here guys

[Honda_FD]

http://img.tapatalk.com/d/14/05/22/egehe9u6.jpghttp://img.tapatalk.com/d/14/05/22/epyqurus.jpg




http://data3.whicdn.com/images/7523206/large.jpg

CF?! What happened to the other one?

@lolmclol
You were right lol. He does have a different coloured rear bar

[Honda_FD]

Anyone in VIC wanna buy my Mugen front lip? Only had it for little over a month
Has all original bolts and brackets thats never been used.
Slight crack on the bottom of the lip.

[chrischris]

Yeah, found them cheap. They dont look too great stock though

http://www.tyrepitstop.com.au/site/DefaultSite/filesystem/images/66-ENKEI-SC22-large.png

[stevo1210]

http://img.tapatalk.com/d/14/05/22/egehe9u6.jpghttp://img.tapatalk.com/d/14/05/22/epyqurus.jpg



Here guys

So like... 3 tone car now. :P

[stevo1210]

Might take my lip off and get an STI lip though. The mugen lip is so big and bulgy.
Trying to make the car more OEM+ look

OEM Modulo face lift front lip. :P

It actually looks good for OEM, that's not cause I have one... but yeah. Found Mugen to be a bit too bulky.

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/10155266_10152359901703428_390840860_n.jpg

teehee.

Was gonna get new wheels at one stage... but only got one job ATM (plus another on and off job) and bracing myself for the upcoming Tony Abbott budget. Unless someone finds me a 3rd income, then grey baby will be cool again. LOL.

[jprak]

http://data3.whicdn.com/images/7523206/large.jpg

CF?! What happened to the other one?

@lolmclol
You were right lol. He does have a different coloured rear bar


lolmclol knows me well <3

ahahah carbon? its hydro dripped man :D

[darktmt]

@jprak damn how much did that cost you? to hydro dip?

[jprak]

@jprak damn how much did that cost you? to hydro dip?

ahahah sorry man was kidding. its actual carbon

but i would estimate around 200-300...

[Honda_FD]

What happened to your fiberglass one?
I'll take it :)

Someone buy my mugen lip! Need the money for new part :)

[curtis265]

lolmclol knows me well <3

ahahah carbon? its hydro dripped man :D

ooo

how much it cost to get that sorta thing done?

[jprak]

Hydro dip varies on how big the item is.
If your in NSW Facebook just dip it hydrographic and get a quote

He's got a bigger machine coming in for bigger stuff so yeah.


Btw guys EOI my fd2r Js racing 60Rs titanium ver. Let me know if keen

[lolmclol]

lolmclol knows me well <3

ahahah carbon? its hydro dripped man :D

Hrhrhrhr <3

[threesix]

So guyz...

Battery is dead (on my keys!!) and need to replace it. What's the battery size model? CR1616 right???

Can these be bought anywhere???


Ps. Jprak ������������������������������

[curtis265]

So guyz...

Battery is dead (on my keys!!) and need to replace it. What's the battery size model? CR1616 right???

Can these be bought anywhere???


Ps. Jprak ������������������������������

any mr minnut

[lolmclol]

So guyz...

Battery is dead (on my keys!!) and need to replace it. What's the battery size model? CR1616 right???

Can these be bought anywhere???


Ps. Jprak

Chemists also sell them

[threesix]

Jackpot!! Flanks guys.

My plastic key case cracked a while ago and I superglued it up... So I gotta break it open. Just got 2 new cases off eBay for 10 bones.

All up a cheap fix. Honda probably would have charged 80 bucks or something : /

[lolmclol]

$80 for the battery alone ;-)

[jprak]

threesix...you called?

[threesix]

I put lots of emoticons that were thumbs ups, happy faces, and so on regarding your new stuff.

All though I still think you should piss the crooked yellow number plate off. But hey... It's your world and I'm just living in it. ;)

[Honda_FD]

Should I?
Not sure if it will look good on my car.

http://www.ultrex.com.au/images/chargespeed%20style%20my06-07%20lip%2001.jpg

[SharkChu]

Upgraded stock horn with the Accord horn =D

[jprak]

Lol! Don't have the bolts for it lol. I'll be getting custom plates anyways:)


Do it bao!

[Honda_FD]

Do it bao!

Most likely will. Dont really like the Mugen lip I have now :(
Want to get rid of it.

[jprak]

Really I like them both :)

[Honda_FD]

I dont like the facelift Mugen lip. Too bulgy. Im trying to go for a OEM+ clean look.

[jprak]

Suspension blew guys

borrowed my friends SSRs too wide and rubbed on the airline.
Slight chance airbag popped as well

[darktmt]

@jprak LATERS! i feel for you man.. stay strong haha

[Honda_FD]

Suspension blew guys

borrowed my friends SSRs too wide and rubbed on the airline.
Slight chance airbag popped as well

Farrrkkkk Shattered as Bro!
RIP JPraks Wallet!

[jprak]

Farrrkkkk Shattered as Bro!
RIP JPraks Wallet!

airline just damaged..luckily got spares (Y)

working on it today later on

[nedkerry]

Good luck with it, dude!

[jprak]

Good luck with it, dude!

thanks man! got it all fixed :)

my mate helped out.

daylight pic of my front end. will get a rear shot soon:

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10338308_10203787787478120_8826022221791562230_n.j pg



Rear shot

http://img.tapatalk.com/d/14/05/25/a4yva3a7.jpg

[Honda_FD]

@Jprak Looks so bloody good bro! It needs a spoiler or something in the rear.
If you went full Functional/Track that would look mint as!

[jprak]

Dw I'm getting something for the rear ;)

[stevo1210]

Dw I'm getting something for the rear ;)

Is it Sparkle Grey paint? LOL

[nedkerry]

OH LAWDY! xD
that looks freaking awesome!!!
so that's what you've been up to!

[jprak]

OH LAWDY! xD
that looks freaking awesome!!!
so that's what you've been up to!

ahahha thanks :)


Is it Sparkle Grey paint? LOL



ahahah not yet :)

[Honda_FD]

@jPrak Is that a type R front? That grill on it looks hawt!

[jprak]

Yeah type r bumper with grille

I tried putting the same grille on facelift

Didn't work out lol!

[Honda_FD]

Yeah type r bumper with grille

I tried putting the same grille on facelift

Didn't work out lol!

Really? Damnnnn! I've always wanted one :(
Are you going to get the mugen badge on the side?

http://www.zerotohundred.com/newforums/attachment.php?attachmentid=407495&d=1319981761

[jprak]

No badge there gonna out a grade A Sticker there

I got a spare type R grille so one silver and one black

[threesix]

Is it Sparkle Grey paint? LOL

the was a low key zing! hehe

[NeedVtec]

Any of you melbourne boys wanna buy a k&n typhoon intake for a fd2? Going back to stock. Near new condition, and selling for how much I got it for $100

[EKVTIR-T]

if you can throw in sum king springs since we're both asian would take it for 50

[Honda_FD]

Any of you melbourne boys wanna buy a k&n typhoon intake for a fd2? Going back to stock. Near new condition, and selling for how much I got it for $100

Whyyy....?
I'll take the silicone joiner :)

[nedkerry]

So I think I just got jibbed.
After my friend showed me what his Crystalvision lights look like on his early 2000 Megane, I decided to buy a pair for my Civic.
I found a pair of Crystalvision headlights for $25 on Amazon, and thought why the hell not? I thought it should have been okay as I thought Amazon had significantly less fakes.
...Sigh, I found out (again, for the 100th time) that you get what you pay for.

For a bit of fun though, in the picture below, who reckons they know which one is the Crystalvision, and which one is the OEM light? :)
https://dl.dropboxusercontent.com/u/108454819/headlights.jpg

[jprak]

So I think I just got jibbed.
After my friend showed me what his Crystalvision lights look like on his early 2000 Megane, I decided to buy a pair for my Civic.
I found a pair of Crystalvision headlights for $25 on Amazon, and thought why the hell not? I thought it should have been okay as I thought Amazon had significantly less fakes.
...Sigh, I found out (again, for the 100th time) that you get what you pay for.

For a bit of fun though, in the picture below, who reckons they know which one is the Crystalvision, and which one is the OEM light? :)
https://dl.dropboxusercontent.com/u/108454819/headlights.jpg


philips crystal vision? yea you got jibbed man :(

i had philips crystal vision. wasnt like that.

ebay man, get diamond vision...its around 50-60max...worth it though :)

[SharkChu]

So I think I just got jibbed.
After my friend showed me what his Crystalvision lights look like on his early 2000 Megane, I decided to buy a pair for my Civic.
I found a pair of Crystalvision headlights for $25 on Amazon, and thought why the hell not? I thought it should have been okay as I thought Amazon had significantly less fakes.
...Sigh, I found out (again, for the 100th time) that you get what you pay for.

For a bit of fun though, in the picture below, who reckons they know which one is the Crystalvision, and which one is the OEM light? :)
https://dl.dropboxusercontent.com/u/108454819/headlights.jpg


If you in NSW, I got heaps of spare headlights for cheap. ahaha nightbreakers, HIDs etc.

But yeah, def fakes.

I tend to spend that extra $$ for the car.. !

[jprak]

If you in NSW, I got heaps of spare headlights for cheap. ahaha nightbreakers, HIDs etc.

But yeah, def fakes.

I tend to spend that extra $$ for car.. !

hey babe do you have a spare key...









to your heart


<3

[NeedVtec]

Whyyy....?
I'll take the silicone joiner :)

Just buy the whole thing hahaha

[Honda_FD]

@Jprak What did you do to get the Js Lip to fit the Facelift front?
Might look into getting one if I cant get a Subaru Lip

[jprak]

@Jprak What did you do to get the Js Lip to fit the Facelift front?
Might look into getting one if I cant get a Subaru Lip

just test fittted it?? should fit straight on...will only mod IF you want the js duct on it as well.

[*DAN*]

Any of you melbourne boys wanna buy a k&n typhoon intake for a fd2? Going back to stock. Near new condition, and selling for how much I got it for $100

guys reckon it could be retrofitted onto a r18? Wouldnt mind if its still for sale and funds clear up

[NeedVtec]

guys reckon it could be retrofitted onto a r18? Wouldnt mind if its still for sale and funds clear up
Happy for you to come suss it out. Will probably need a different joiner

[*DAN*]

Happy for you to come suss it out. Will probably need a different joiner

Will take you up on that offer when im ready to buy

[Honda_FD]

I think the R18 and the K20z has different air sensors.

[FDYOU2]

Hey guys, just an update on some purchases lately. Mate got his J's Racing Carbon Fibre Bonnet

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10418865_10152441161924763_4862992686146494241_n.j pg

Just bought a Mugen RR one for me, hopefully it arrives tomorrow.

http://img.photobucket.com/albums/v620/hyuuganeji/Carbon%20Fiber/10122009157.jpg

And if guy are thinking of upgrading your lights. I really recommend these HIDs from ebay. 6000k with the ballast connected to the bulb.

http://i249.photobucket.com/albums/gg222/95soarer/Civic%20HID/9006AIOA.jpg

[jprak]

Where did you guys order the carbon bonnets from? Nice progress, more faster then me lol


The HIDs, they blind oncoming or they adjusted any pics of install + light cutting off from wall

[FDYOU2]

Where did you guys order the carbon bonnets from? Nice progress, more faster then me lol


The HIDs, they blind oncoming or they adjusted any pics of install + light cutting off from wall

The bonnets were from eBay. And the left side is adjusted higher than the right so it won't blind oncoming traffic. Install would just be the same as a normal bulb install. Plug and play, no cutting needed.

[darktmt]

How often do you guys change your engine oil?

[NeedVtec]

How often do you guys change your engine oil?

7.5 till 10k km

[jprak]

Thanks for the info.


Saw the fd yesterday looks nice

Should get photos done when mines finished LOL

[Honda_FD]

To all the boys in Melbourne. Did you get Accepted into Honda Network?

I know ChrisChris and I have.

[nedkerry]

To all the boys in Melbourne. Did you get Accepted into Honda Network?

I know ChrisChris and I have.

Yeah, my car got in...just! I think my game console got me through haha.

[Honda_FD]

Yeah, my car got in...just! I think my game console got me through haha.

Lol what?

"If you would like to park among any friends, please come together so we can park you together."

Meet up somewhere?

[SharkChu]

I have this damn rattling noise coming from the rear of the car, I can't seem to figure it out, it vibrates when i accelerate, esp when the exhaust starts to get loud. Or when I'm driving over bumpy roads. It sounds like its coming from the back shelf?

Any ideas where to look for this damn rattle?

[lolmclol]

I have this damn rattling noise coming from the rear of the car, I can't seem to figure it out, it vibrates when i accelerate, esp when the exhaust starts to get loud. Or when I'm driving over bumpy roads. It sounds like its coming from the back shelf?

Any ideas where to look for this damn rattle?

I'll take a photo tomorrow its one of the bars in the boot

[SharkChu]

I'll take a photo tomorrow its one of the bars in the boot

Thanks! I assume have to just put some padding or tape it down ?

[lolmclol]

Thanks! I assume have to just put some padding or tape it down ?

http://s27.postimg.org/56iescvgz/IMG_20140530_233447.jpg

Its those two bars, I've been lazy, I just used a hand towel for the time being until I can be bothered to properly work out what I want to do with it, I'm planning on using some foam on either ends eventually.

[nedkerry]

Its those two bars, I've been lazy, I just used a hand towel for the time being until I can be bothered to properly work out what I want to do with it, I'm planning on using some foam on either ends eventually.
If I didn't read your description, I would have thought you were using your boot as a clothesline lol.


Lol what?

"If you would like to park among any friends, please come together so we can park you together."

Meet up somewhere?

http://www.youtube.com/watch?v=hOjKOkWnHLc
I think my in-car gaming system got me through :P
To finish off the exterior, I wanted to carbon wrap a few things before the event, but the vinyl won't arrive on time. So I have a plan B which is either going to be really awesome or really bad :P

Yeah it would be good to meet up first so we can all drive in together :)
There's Parkmore Shopping Centre 5 minutes from the venue. We could meet there.

[chrischris]

If I didn't read your description, I would have thought you were using your boot as a clothesline lol.

I think my in-car gaming system got me through :P
To finish off the exterior, I wanted to carbon wrap a few things before the event, but the vinyl won't arrive on time. So I have a plan B which is either going to be really awesome or really bad :P

Yeah it would be good to meet up first so we can all drive in together :)
There's Parkmore Shopping Centre 5 minutes from the venue. We could meet there.

Wow OUYA in the car, thats so cool. Pre meet at the shopping centre sounds alright

[*DAN*]

Didn't get accepted, all my friends did :( many feels

[Honda_FD]

Yeah it would be good to meet up first so we can all drive in together :)
There's Parkmore Shopping Centre 5 minutes from the venue. We could meet there.


Pre meet at the shopping centre sounds alright

Sounds good to me! Its probably just us 3 though lol. Havent heard from any other FD owners.
I would most likely go with DAN and all the westsider but I'll just make a quick detour and come meet you guys.
We'll organize it closer to the day.

@Nedkerry. Add me on facebook! https://www.facebook.com/Pandahahaaa

You guys can add me aswell. Dont stalk plz... ;)
I dont bite..

[nedkerry]

Didn't get accepted, all my friends did :( many feels

http://www.youtube.com/watch?v=Kp_S9q9sHWE
:(


Sounds good to me! Its probably just us 3 though lol. Havent heard from any other FD owners.
I would most likely go with DAN and all the westsider but I'll just make a quick detour and come meet you guys.
We'll organize it closer to the day.

@Nedkerry. Add me on facebook! https://www.facebook.com/Pandahahaaa

You guys can add me aswell. Dont stalk plz... ;)
I dont bite..

added
https://www.facebook.com/andpoon
any of you guys reading, feel free to add me - couple it with a PM though so I know who you are lol.

[iou]

"Another day in paradise"


http://img.tapatalk.com/d/14/05/31/vutupa6e.jpg

[threesix]

Please, please tell me these ain't ROTAS..
http://i745.photobucket.com/albums/xx93/getbuck_2010/14C8E9B4-9DD0-4292-B0A0-F88021DC8B7A_zpsyffsyabj.jpg

[threesix]

"Another day in paradise"


http://img.tapatalk.com/d/14/05/31/vutupa6e.jpg

Oh wow!!! Dump it on it gutz bro bro!!! 10/10

[nedkerry]

"Another day in paradise"

http://img.tapatalk.com/d/14/05/31/vutupa6e.jpg

damn that looks boss!
batman's daily lol

[darktmt]

anyone know what these are for?

http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/AA4AAOxyHIlTZu3Z/$_57.JPG


http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/QK8AAOxyi-ZTZu7Q/$_57.JPG

[jprak]

first one mazda 3 or 6...


2nd unconfirmed...

how you get those bumpers lol?

[threesix]

Liberty?

[darktmt]

some guy selling.. haha he is not sure but says its a "late model honda"

[iou]

Oh wow!!! Dump it on it gutz bro bro!!! 10/10


damn that looks boss!
batman's daily lol



http://img.tapatalk.com/d/14/05/31/vutupa6e.jpg

Thank guys
Can't believe that one day my car become like this :):):)
what you like the most about your car? wheels, headlights, bodykit, exhaust, coilover.........
my one is the headlights

[jprak]

Thank guys
Can't believe that one day my car become like this :):):)
what you like the most about your car? wheels, headlights, bodykit, exhaust, coilover.........
my one is the headlights

mine would be the wholeset up on the car LOL! the kit the bags etc :L

[threesix]

defo the shape of the FD lowered on good rims. looks 100 times better that other cars of that year/series

[*DAN*]

http://www.youtube.com/watch?v=Kp_S9q9sHWE
:(



added
https://www.facebook.com/andpoon
any of you guys reading, feel free to add me - couple it with a PM though so I know who you are lol.

Spoke too soon, I'm back in guys. Will see you all there :)

[Honda_FD]

defo the shape of the FD lowered on good rims. looks 100 times better that other cars of that year/series

:thumbsup::thumbsup::thumbsup:


Anyone tried 9.5+23 on a slammed FD?
Rolled and lipped guards. Got them pulled out as much as i could without having to repaint it.
Bumper tab relocated but wheels rub right at the old bumper tab spot.
No money for a camber kit though -.-

http://i194.photobucket.com/albums/z236/crazyazn312/10443613_10152151332930794_6921425489850939611_n.j pg

[nedkerry]

^I see you were at TPNM haha


Spoke too soon, I'm back in guys. Will see you all there :)
awh snap crackle pop!!!! 4 FDs at the event :D

[jprak]

I ran 17x9.25 +20 poked out so much >.>

[*DAN*]

"Another day in paradise"


http://img.tapatalk.com/d/14/05/31/vutupa6e.jpg


^I see you were at TPNM haha


awh snap crackle pop!!!! 4 FDs at the event :D

if only, dont drive a FD. Ive got an 9th gen :D

[nedkerry]

oh yeah my bad!
well, at least we all get to park together :D

[Honda_FD]

I ran 17x9.25 +20 poked out so much >.>

If I had bags I would rock these daily.


@DAN/Westsiders attending Honda Network.
Car wash at Derrimut Sunday night?
I want to give the car a proper wash top to bottom.
It'll be packed Monday mornming

[iou]

Please, please tell me these ain't ROTAS..
http://i745.photobucket.com/albums/xx93/getbuck_2010/14C8E9B4-9DD0-4292-B0A0-F88021DC8B7A_zpsyffsyabj.jpg

what car is that?

[EKVTIR-T]

e90 bmw

[chrischris]

Trying a new colour for honda network
http://i.imgur.com/h9IQOMo.png

[FDYOU2]

My Mugen RR Carbon Fibre Bonnet finally arrived!

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/1908045_10152453240969763_5235386727141533192_n.jp g

[jprak]

Nice man! Looking good!

[LetsDuDiss]

Fuarkk!! Nice FD man, how good was the fitment? From what i read, you got it from ebay yeah?

Btw, im new here. Hi guys FD head. Ill be like one of you guys soon, i hope lol

[iou]

welcome aboard :-) your fd's photos??? it's time to spend money, lol. Gonna be crazy with the mods

this is my FD from the first time.......
http://img.tapatalk.com/d/14/06/04/pubabeme.jpg

..........and now
http://img.tapatalk.com/d/14/06/04/qyzu6uhe.jpg

[chrischris]

welcome aboard :-) your fd's photos??? it's time to spend money, lol. Gonna be crazy with the mods

this is my FD from the first time.......

..........and now


such transformation, wow

Still need to give a clear coat.
http://i.imgur.com/oAtCshF.jpg

[LetsDuDiss]

welcome aboard :-) your fd's photos??? it's time to spend money, lol. Gonna be crazy with the mods

this is my FD from the first time.......

..........and now


LOL okay, I will take a picture after work. Not much done on it as of now though. Only visor and door sills.

I wish that front lip is available for pre-facelift hahaha oh well

I'm thinking of getting a RR kit from OTR but I'm not sure how well it will fit. Anyone got any ideas or got kits from them before or where you got your kits?


such transformation, wow

Still need to give a clear coat.


I have stockies :P Imma copy your white color. Still dont know how to paint rims but ahahah

[nedkerry]

such transformation, wow

Still need to give a clear coat.
http://i.imgur.com/oAtCshF.jpg

xD really looking forward to seeing this on Monday!!!


LOL okay, I will take a picture after work. Not much done on it as of now though. Only visor and door sills.

I wish that front lip is available for pre-facelift hahaha oh well

I'm thinking of getting a RR kit from OTR but I'm not sure how well it will fit. Anyone got any ideas or got kits from them before or where you got your kits?

I have stockies :P Imma copy your white color. Still dont know how to paint rims but ahahah

welcome, dude :)
RR kit will fit fine. I got my Mugen kit done from them back in Nov 2013 (opted for a subtle look) and they did a pretty good job (not perfect), but pretty good considering the kit isn't OEM. They're good with communications, too.
I've seen a couple of RR kits in Melb and they look pretty sweet!
The quotes I got from them back in Nov were:

Civic FD Mugen RR Kit (Front lip, side skirt, and rear lip with LED) - $1000
Civic FD Mugen kit (Front lip, side skirt, and rear lip) - $600
Currently (Nov 2013) we only have the Mugen style wing in stock - $250

We do offer painting and fitting:
Mugen RR kit - $900
Mugen kit - $600
Wing - $200

Come to the Honda Network meet (https://www.facebook.com/events/233891376810587/?fref=ts) on Monday (public hol) - our FDs + a 9th Gen will be on display. Come say hi :)

[LetsDuDiss]

xD really looking forward to seeing this on Monday!!!



welcome, dude :)
RR kit will fit fine. I got my Mugen kit done from them back in Nov 2013 (opted for a subtle look) and they did a pretty good job (not perfect), but pretty good considering the kit isn't OEM. They're good with communications, too.
I've seen a couple of RR kits in Melb and they look pretty sweet!
The quotes I got from them back in Nov were:

Civic FD Mugen RR Kit (Front lip, side skirt, and rear lip with LED) - $1000
Civic FD Mugen kit (Front lip, side skirt, and rear lip) - $600
Currently (Nov 2013) we only have the Mugen style wing in stock - $250

We do offer painting and fitting:
Mugen RR kit - $900
Mugen kit - $600
Wing - $200

Come to the Honda Network meet (https://www.facebook.com/events/233891376810587/?fref=ts) on Monday (public hol) - our FDs + a 9th Gen will be on display. Come say hi :)

Oh wow, they quoted me 350 for the rear wing. But yeah same price for RR kit, 1000. This is my quote;

Civic FD
Mugen RR Style Front bumer bar with fog light, grille, mesh - $550
Mugen RR Style Rear bumper lip with LED (single exhaust outlet) - $275
Mugen Style Side Skirt - $250
Mugen Style Wing - $350
Mugen Style Window Visor Civic FD - $80

Mugen RR bodykit package price for (Front Bumper, side skirt, and rear
lip) will be $1000. Kindly let us know your postcode in order to quote
shipping cost.

Too bad, I am in Sydney lol anyone from Sydney going there?

[jprak]

Oh wow, they quoted me 350 for the rear wing. But yeah same price for RR kit, 1000. This is my quote;

Civic FD
Mugen RR Style Front bumer bar with fog light, grille, mesh - $550
Mugen RR Style Rear bumper lip with LED (single exhaust outlet) - $275
Mugen Style Side Skirt - $250
Mugen Style Wing - $350
Mugen Style Window Visor Civic FD - $80

Mugen RR bodykit package price for (Front Bumper, side skirt, and rear
lip) will be $1000. Kindly let us know your postcode in order to quote
shipping cost.

Too bad, I am in Sydney lol anyone from Sydney going there?


fitment wise from OTR...they're pretty good + theyre PP material :)

welcome, what area you from in syd?

you can always change your preface to facelift bumper. straight bolt on

[Honda_FD]

@Chris Looks good bro. Wont be doing much to my car for Network. Parts wont arrive in time :(

@IOU Did I just drive past you on the way to Sunshine at 12:30?
Looks tough as bro! Cant wait till you lower it.
You actually live close me aye? I live near the end of Glengala Road near Fitzgerald Road
I've seen your car a few times back when it was stock and only had Mugen lip.
Always wondered who it was. Your TE37 looks mad! So much Concave!

I'll buy them off you! :)

[jprak]

What yiu order mate?! Tell me bun bao!

[LetsDuDiss]

fitment wise from OTR...they're pretty good + theyre PP material :)

welcome, what area you from in syd?

you can always change your preface to facelift bumper. straight bolt on

Where did you get your kit from jprak, sick FD you got there dude, mismatch colour though hahaha :P personal preference aye? lol

I'm in Kellyville but I go Cabra A LOT. Sadly I haven't seen any modifed FD in Cabra (I lived there for 5 years, just moved)

Where can I get a bumper? Wreckers? I wouldn't mind a facelift bumper with mugen kit and rear RR lip LOL would that look weird?

[jprak]

Hmm bought the type r bumper off my mate which he bought it off from some guy ozhonda
Same goes for the lip.

Mismatch, you mean I'm cheap ATM Lol!

Cabra? Really I'm local as I'm from mt Pritchard. I'm always around cabra LOL

Best chance are wreckers man. Won't look weird make it diff. I had mugen front side and RR single outlet back. I like that look but I got the current parts cheap so yeah =)

[LetsDuDiss]

Hmm bought the type r bumper off my mate which he bought it off from some guy ozhonda
Same goes for the lip.

Mismatch, you mean I'm cheap ATM Lol!

Cabra? Really I'm local as I'm from mt Pritchard. I'm always around cabra LOL

Best chance are wreckers man. Won't look weird make it diff. I had mugen front side and RR single outlet back. I like that look but I got the current parts cheap so yeah =)

Hahaha that's sick. I used to live in Fairfield hahaha I only saw euro and ep3 around cabra so weird lol

LOL nah man respray is expensive as fk. I don't see how being unable to afford one is cheap lol it's like 3k or something lol 3 RR kits there

I know JDMyard stock Type R kits but they sell it as a kit which is gay....LOL I really like rear RR, front RR is so expensive though that's why I wouldn't mind a facelift mugen lift. That stuff looks good with mugen grill so yeah.

Wreckers are ripoffs man, last time I got quoted 300 for a bonnet because some douche smashed my windscreen and bonnet not long ago

What happened to your RR bars then. Sold it?

[jprak]

Yeah they don't wanna part out cause they themselves bought it as a kit


Wreckers, should of bargin man. Cash in hand would of been an easier transaction.

[Honda_FD]

What yiu order mate?! Tell me bun bao!

Nothing Major atm. Was going to get Rear Camber arms, Type R side and rear. MAYBE a BYS (Back Yard Special) Front lip.
Either BYS Or Seekers. Happy with a Type R Conversion and Seibon Rear Diffuser... Too many options

Saving up for a new car atm. Dont plan on changing the FD too much

Always loved the Seibon diffuser

http://hellaflush.com/wp-content/uploads/2012/07/DSC_0776.jpg

[LetsDuDiss]

Yeah they don't wanna part out cause they themselves bought it as a kit


Wreckers, should of bargin man. Cash in hand would of been an easier transaction.

Meh, I didn't really need a bonnet at the time anyway, there was no paint damage so I just popped the bonnet right up.

But yeah, will change my bonnet if I got a cheap RR front. Not many are being sold around Sydney, I wanna test fit first before paying because i'm cheap lol

[Honda_FD]

I know JDMyard stock Type R kits but they sell it as a kit which is gay....LOL I really like rear RR, front RR is so expensive though that's why I wouldn't mind a facelift mugen lift.

Mars Performance in Melbourne sells them as singles. They do shipping aswell.
By the time you buy Facelift front and Mugen front lip. You will be looking ATLEAST $400 - $500 fitted and painted.
Might aswell save a little more and get whole kit.

Only good thing about the Mugen lip is that it is plastic. If you plan on slamming your FD
in the future. Make sure your kit is plastic. Fiberglass shatters on impact. Were plastic is more flexible and doesnt shatter.

[LetsDuDiss]

Mars Performance in Melbourne sells them as singles. They do shipping aswell.
By the time you buy Facelift front and Mugen front lip. You will be looking ATLEAST $400 - $500 fitted and painted.
Might aswell save a little more and get whole kit.

Only good thing about the Mugen lip is that it is plastic. If you plan on slamming your FD
in the future. Make sure your kit is plastic. Fiberglass shatters on impact. Were plastic is more flexible and doesnt shatter.

You mean RR bars? I dont see any Type R kits/bars on their website.

Hmm yeah you're right. Dw then, RR or Type R bars now ahaha.

I'm not gonna slam it any time soon, saving up for respray job. And yeah thanks for the info

Anyone got RR bars for sales? LOL

[Honda_FD]

You mean RR bars? I dont see any Type R kits/bars on their website.

Hmm yeah you're right. Dw then, RR or Type R bars now ahaha.

I'm not gonna slam it any time soon, saving up for respray job. And yeah thanks for the info

Anyone got RR bars for sales? LOL

Didnt you say you wanted RR Side and rears? Lol
If you want singles then Mars. If you're getting a full kit then go local. Save money instead of paying for shipping.

I dont mind the RR. Only reason Im not getting it because 7/10 FDs here have them. Want to do something different.
and go different direction. Not "Ohh.. Another RR kitted FD"

[LetsDuDiss]

Didnt you say you wanted RR Side and rears? Lol
If you want singles then Mars. If you're getting a full kit then go local. Save money instead of paying for shipping.

I dont mind the RR. Only reason Im not getting it because 7/10 FDs here have them. Want to do something different.
and go different direction. Not "Ohh.. Another RR kitted FD"

LOL nah when I was talking JDMyard, I was talking about Type R kits. hahaha but all good.

I don't mind any kit at all lol as long as it fits and cheap and convenient to buy (hate shipping). Where to get RR kits in Sydney? I only know JDMyard with Type R kit. That's only kit in Sydney that I know of

[jprak]

Or buy a facelift with the same colour win!!

Lol! I wanted that idea , seibon diffuser lol=(

Might give my rear end a diff path

Lol

[Honda_FD]

LOL nah when I was talking JDMyard, I was talking about Type R kits. hahaha but all good.

I don't mind any kit at all lol as long as it fits and cheap and convenient to buy (hate shipping). Where to get RR kits in Sydney? I only know JDMyard with Type R kit. That's only kit in Sydney that I know of

Not sure as I am from Melbourne.
Is JDM Concept and JDMYard the same?

[jprak]

Not sure as I am from Melbourne.
Is JDM Concept and JDMYard the same?

nope diff companies LOL!


hmm best bet get it from OTRmotorsports as shipping was around 50-80 bux.ive used them before and i recommend it

[LetsDuDiss]

Not sure as I am from Melbourne.
Is JDM Concept and JDMYard the same?

Nah man JDMConcept is different

Where are your RR kits, jprak?

[Honda_FD]

Nah man JDMConcept is different


nope diff companies LOL!
hmm best bet get it from OTRmotorsports as shipping was around 50-80 bux.ive used them before and i recommend it

Lol Their page setup looks the same.

OTR is good. Service is good. They have a bit of hate towards hondas when I go to their shop.
Because I dont have a high horsepower Evo or Subaru like them they talk down on me.

Other than that. They're really good. Cheapest in Melbourne.
Just their attitude

[LetsDuDiss]

nope diff companies LOL!


hmm best bet get it from OTRmotorsports as shipping was around 50-80 bux.ive used them before and i recommend it


Lol Their page setup looks the same.

OTR is good. Service is good. They have a bit of hate towards hondas when I go to their shop.
Because I dont have a high horsepower Evo or Subaru like them they talk down on me.

Other than that. They're really good. Cheapest in Melbourne.
Just their attitude

HAHAHA, they probably look down on this whole forum then LOL

Alright, I'll see what I can afford this month. Should I paypal or bank deposit. 4% surcharge for paypal. 40 bucks more.... Any thoughts? Will I get jibbed paying by bank deposit? LOL

[jprak]

Lol nah they're a legit business
Jsut notify them you plan to deposit money into their acc and take a pic of receipt to them

Thy usually send it out the same day or day after

[LetsDuDiss]

LOL ok. Decide after this long weekend. Don't wanna wait for it over the weekend LOL. Gonna paint my stockies white this weekend

Do you know where to get paint in sydney?

[nedkerry]

Lol Their page setup looks the same.

OTR is good. Service is good. They have a bit of hate towards hondas when I go to their shop.
Because I dont have a high horsepower Evo or Subaru like them they talk down on me.

Other than that. They're really good. Cheapest in Melbourne.
Just their attitude

Yeah I got the same attitude, too lol. I was enquiring about an exhaust system from that and in a nutshell, they're like, "FDs are slow so you shouldn't bother doing performance mods to it - just do cosmetic". He even went as far to say the FD2 was slower than the FD1 because it was heavier.
I mean, it's practical advice and at least they're not out there to rip you off, but it was kinda lol.


HAHAHA, they probably look down on this whole forum then LOL

Alright, I'll see what I can afford this month. Should I paypal or bank deposit. 4% surcharge for paypal. 40 bucks more.... Any thoughts? Will I get jibbed paying by bank deposit? LOL

I'm tightarse so I'd go bank deposit. Agree with jprak, they are a legit business. Should anything go pear shape, your bank will recover the money for you anyway.

[threesix]

this thread is pumping again!!! love it.

[LetsDuDiss]

Yeah I got the same attitude, too lol. I was enquiring about an exhaust system from that and in a nutshell, they're like, "FDs are slow so you shouldn't bother doing performance mods to it - just do cosmetic". He even went as far to say the FD2 was slower than the FD1 because it was heavier.
I mean, it's practical advice and at least they're not out there to rip you off, but it was kinda lol.



I'm tightarse so I'd go bank deposit. Agree with jprak, they are a legit business. Should anything go pear shape, your bank will recover the money for you anyway.

LOL but FD looks nice. I'm so sick of looking at EVOs tbh but wow at it everytime hahaha

[jprak]

LOL ok. Decide after this long weekend. Don't wanna wait for it over the weekend LOL. Gonna paint my stockies white this weekend

Do you know where to get paint in sydney?

go to like peps supercheap or autobarn they all do paints there

[nedkerry]

LOL but FD looks nice. I'm so sick of looking at EVOs tbh but wow at it everytime hahaha
Yeah they do look nice ^_^
If only Japan exported the Mugen Type R Civic to Australia. That'd be the best of both worlds!
Are evo's everywhere in Sydney? Sounds like you have a minor vendetta against them lol jks

[jprak]

Yeah they do look nice ^_^
If only Japan exported the Mugen Type R Civic to Australia. That'd be the best of both worlds!
Are evo's everywhere in Sydney? Sounds like you have a minor vendetta against them lol jks

mugen RR right? theres apparently one in WA... thats what ive heard....


hes right...evos are like the new hondas for full license people LOL!

[LetsDuDiss]

go to like peps supercheap or autobarn they all do paints there

What about V.G.Paint. They quoted me $25 for a can of base coat. Ripoff?


Yeah they do look nice ^_^
If only Japan exported the Mugen Type R Civic to Australia. That'd be the best of both worlds!
Are evo's everywhere in Sydney? Sounds like you have a minor vendetta against them lol jks

LOL evos are everywhere in Cabramatta.

Hahaha nah I wanted an EVO back when I was a L plater LOL can't afford it so I went for EP3, can't afford it so I went for FD lol I regret notthing, FD is fast enough to speed (for me) ahahaha I dont want a speeding ticket

[iou]

What about V.G.Paint. They quoted me $25 for a can of base coat. Ripoff?



LOL evos are everywhere in Cabramatta.

Hahaha nah I wanted an EVO back when I was a L plater LOL can't afford it so I went for EP3, can't afford it so I went for FD lol I regret notthing, FD is fast enough to speed (for me) ahahaha I dont want a speeding ticket

Haha, you are right. Of course Evos are better than FDs in terms of performance when they are moded, but for daily driving FDs are good enough. So that's why i dont spend much money on performance mods for my FD. In my opinion, you can spend on turbo charge, air intake,........just for better feeling but not for racing with Evo which is has the same mod. Even, with a turbo FD, i dont know whether they can beat a mazda mp25 or not. How do you think guys?

[LetsDuDiss]

Haha, you are right. Of course Evos are better than FDs in terms of performance when they are moded, but for daily driving FDs are good enough. So that's why i dont spend much money on performance mods for my FD. In my opinion, you can spend on turbo charge, air intake,........just for better feeling but not for racing with Evo which is has the same mod. Even, with a turbo FD, i dont know whether they can beat a mazda mp25 or not. How do you think guys?

I thought mp25 is about the same as FD2. If youre driving a FD1, there is not much in terms of performance mods that you can do on a R18. But FD2, I think there is more potential. LOL i'm not sure, just my thought from what I know. But yeah I'm sure a turbo FD2 can chop a mp25 no problem. But I would never spend money on turbo coz that shit is fuel hungry as fk. Maybe CAI

I drive manual so my acceleration is always slower than others ahahaha unless I hit vtec but I feel bad for my petrol tank LOL

[Honda_FD]

I thought mp25 is about the same as FD2. If youre driving a FD1, there is not much in terms of performance mods that you can do on a R18. But FD2, I think there is more potential. LOL i'm not sure, just my thought from what I know. But yeah I'm sure a turbo FD2 can chop a mp25 no problem. But I would never spend money on turbo coz that shit is fuel hungry as fk. Maybe CAI

I drive manual so my acceleration is always slower than others ahahaha unless I hit vtec but I feel bad for my petrol tank LOL

Exhaust and Intakes are the main performance mods people do to their FDs not days.
I've done Exhaust, Intake and the rest is on handling and cosmetic.

When I race against the new V8 Holdens/Fords. They take me on straights but around corners and round abouts
I gain on them and pretty much eatting their rear bumpers. Thats on cheap china tyres.
Going for a wheel alignment soon to add more camber to the front for better grip around corners.

With alignment and good tyres I could easily past them.

FDs arent as bad as people think they are. Especially for us kids that on their P plates.
The only people that insults FDs are kids with rich parents that buys them any car they want.
Saw a kid the other day with a built DC5R. Still had his High School uniform on.

[LetsDuDiss]

Exhaust and Intakes are the main performance mods people do to their FDs not days.
I've done Exhaust, Intake and the rest is on handling and cosmetic.

When I race against the new V8 Holdens/Fords. They take me on straights but around corners and round abouts
I gain on them and pretty much eatting their rear bumpers. Thats on cheap china tyres.
Going for a wheel alignment soon to add more camber to the front for better grip around corners.

With alignment and good tyres I could easily past them.

FDs arent as bad as people think they are. Especially for us kids that on their P plates.
The only people that insults FDs are kids with rich parents that buys them any car they want.
Saw a kid the other day with a built DC5R. Still had his High School uniform on.

What handling mods do you have?

LOL agreed. Back then there was this kid at church with a convertible Merc as a red P and full "dis" my EK1 LOL. Honda owners have a lot of haters LOL

[integraR]

Exhaust and Intakes are the main performance mods people do to their FDs not days.
I've done Exhaust, Intake and the rest is on handling and cosmetic.

When I race against the new V8 Holdens/Fords. They take me on straights but around corners and round abouts
I gain on them and pretty much eatting their rear bumpers. Thats on cheap china tyres.
Going for a wheel alignment soon to add more camber to the front for better grip around corners.

With alignment and good tyres I could easily past them.

FDs arent as bad as people think they are. Especially for us kids that on their P plates.
The only people that insults FDs are kids with rich parents that buys them any car they want.
Saw a kid the other day with a built DC5R. Still had his High School uniform on.

do you mean rx7 fd

http://www.j-spec.com.au/SEVS/images/Mazda_RX-7_FD3S_6.jpg

[EKVTIR-T]

hnnnnggggggg ^

[FDBenni]

I was enquiring about an exhaust system from

What exhaust options do OTR stock?

[*DAN*]

These civics have heaps of potential if you know how to drive them right, could potentially keep up/beat a lot of cars if you know what youre doing.

Most of these 'kids' dont know what theyre doing so makes it easier i guess

[nedkerry]

Even, with a turbo FD, i dont know whether they can beat a mazda mp25 or not. How do you think guys?

These civics have heaps of potential if you know how to drive them right, could potentially keep up/beat a lot of cars if you know what youre doing.
Most of these 'kids' dont know what theyre doing so makes it easier i guess
I've been waiting for Stevil to kick in, 'yo, but he's beaten Evos and Rex's in his FD. I think there are videos on youtube of it.

The biggest performance gains for an FD that I've heard of are turbo/supercharger which looked like it was gonna be $6-$10K all up for an extra 10-20kw? and an FD in Singapore pulling an extra ~20kw on an eManage ultimate ECU, ($2000 AUD?). My theory behind the gains is that Singapore have better fuel quality than Australia and hence, it can extract more power.


FDs arent as bad as people think they are. The only people that insults FDs are kids with rich parents that buys them any car they want.
Saw a kid the other day with a built DC5R. Still had his High School uniform on.
Agreed.
My first car was a hand me down 1988 Pulsar sedan. I loved it to bits. So much fun to drive. I wish my parents didn't have to get rid of it. Other international kids in uni were driving BMW M3's, AMG's, and whatnot. I still felt like a boss in my Pulsar lol.
I've had my FD for 7 years. It's the first-ish car I bought with my own money. It would be heart wrenching to part with it T__T

[nedkerry]

http://www.elantraxd.com/forums/showthread.php?35338-DIY-Eyelids
DIY eyelids. Looks pretty lol. Gonna give it a shot. Hopefully have it ready before Monday.

[SharkChu]

Tbh, I hardly see any modded civics around Fairfield, (I live around the area) .

I have not ONCE seen jpraks civic on the road =[ like whattttttt.

Plenty of FDs with just HID "upgrades" at the most I've seen here.

If you head east to around hurstville/kogarah area, that's where most of the modded FDs are about! Don't think they're on ozhonda though =[

[FDYOU2]

I drive past fairfield pools nearly everyday LOL. I sometimes see a white fd with mugen kit here and there. But seeing done up FDs are quite rare.

[stevo1210]

Tbh, I hardly see any modded civics around Fairfield, (I live around the area) .

I have not ONCE seen jpraks civic on the road =[ like whattttttt.

Plenty of FDs with just HID "upgrades" at the most I've seen here.

If you head east to around hurstville/kogarah area, that's where most of the modded FDs are about! Don't think they're on ozhonda though =[

But... but...

I'm always at Green Peppercorn or the bowling alley in Fairfield!

Then I hang out at John street in Cabra cause I feel more at home than where I am. LOL.

[jprak]

Lol!! Why have we all not met it seen each other's cars XD

I've seen your black fd and your mates fd once. That black and white combo XD

[chrischris]

http://www.elantraxd.com/forums/showthread.php?35338-DIY-Eyelids
DIY eyelids. Looks pretty lol. Gonna give it a shot. Hopefully have it ready before Monday.

looks really cool and simple to do, ive kept an eye out for eyelids on ebay for a while but never decided to buy any, might give this a try. Already have a spray can of alabaster silver :)

[nedkerry]

looks really cool and simple to do, ive kept an eye out for eyelids on ebay for a while but never decided to buy any, might give this a try. Already have a spray can of alabaster silver :)

yeah eyelids are ridiculously expensive for what they are, but i guess that can be said about any car part haha.
i've got really low expectations for this DIY, but gonna be lols trying to do it.

[Stevil]

Hey anybody got a spare GRILL lying around, want something that looks better than what Ive got, Black would be nice ,Id like to present my pos better for the NSW time attack which is on in a fortnight and a bit, Sydney prefered !

[SharkChu]

Hey anybody got a spare GRILL lying around, want something that looks better than what Ive got, Black would be nice ,Id like to present my pos better for the NSW time attack which is on in a fortnight and a bit, Sydney prefered !

I have a mugen grille painted in sparkle grey? =P

[Stevil]

yeah sounds good, can ya flick us an sms ??