Your Mods To 2006-2011 FD Civics

[threesix]

You just do you player. My opinion means dick squat(s) anyway.

I loved when you first did different panels but now it's looking all over the shop.

It's all love anyway (^_^)

[integraR]

Yeah I was worried about engine light but it's all good, its so fun to drive, high rpms intake noise is soo loud

http://4.bp.blogspot.com/-mexWkNFp88Y/Ux3WG7ynV4I/AAAAAAAAAQ8/otKHJNaf1I0/s1600/Check+Engine.jpg

[autobach]

New colour again, still have the other side blue until i get time to spray them too. Front looks a bit weird cause of negative camber, need to adjust the camber plates but have been to lazy lately.
http://i.imgur.com/2IKBbgO.jpg

I am on the evo8 enkei as well..what tyres are you using? Im still on the stock 235/45/17 allround and lowered 15mm allround with mugen suspensions.

Anyone here can advice if i can swap the springs on mugen suspensions..car kinda sitting on stock height as u can imagine 15mm drop + 17s :eek: its a vtil too

[threesix]

I swear sometimes our cars look like RC cars. http://i33.photobucket.com/albums/d90/187AK/D1333564-F765-403E-8D9C-7864FFB941CE.jpg

[chrischris]

I am on the evo8 enkei as well..what tyres are you using? Im still on the stock 235/45/17 allround and lowered 15mm allround with mugen suspensions.

Anyone here can advice if i can swap the springs on mugen suspensions..car kinda sitting on stock height as u can imagine 15mm drop + 17s :eek: its a vtil too

I am on 215/45 but it want to go 205. It doesn't rub only at full lock over a big bump. When I had the stock tires and was only on king springs it would rub a bit. I have my set of king springs you could have for 100$ if you are interested, have a look on my intro thread how the car sat

[autobach]

I am on 215/45 but it want to go 205. It doesn't rub only at full lock over a big bump. When I had the stock tires and was only on king springs it would rub a bit. I have my set of king springs you could have for 100$ if you are interested, have a look on my intro thread how the car sat

Thanks for the kind offer. I ll have to confirm if my springs can be swapped on the mugen. I am going to change the tyres very soon as the currents 235/45 are in bad condition. I think I ll go with 215/45 like yr current setup. How much are you lowered atm with those tyres? 205/40 will be sick !!!

[threesix]

So I rang honda and asked about the 12v battery replacement. I said that my engine was cranking over to turn on in the cold mornings (normally when I turn the key it's silent... No engine crank what so ever)

They told me it was gonna be $260 to replace and fit it!!!

Fxck that.

I went and bought a battery from Battery World (same as the last one) for $120. Took 5 minutes to swap as you guys would know.

Anyway, this morning (-3) I turned the key and the engine made the cranking noise.

Does hybrid start off they hybrid battery and not the 12v engine one? Hope me big battery isn't dying. $$$$$$$$$ :(. Yay!!!!!!

[Honda_FD]

I am on 215/45 but it want to go 205. It doesn't rub only at full lock over a big bump. When I had the stock tires and was only on king springs it would rub a bit. I have my set of king springs you could have for 100$ if you are interested, have a look on my intro thread how the car sat


Thanks for the kind offer. I ll have to confirm if my springs can be swapped on the mugen. I am going to change the tyres very soon as the currents 235/45 are in bad condition. I think I ll go with 215/45 like yr current setup. How much are you lowered atm with those tyres? 205/40 will be sick !!!

Go for 215/40 front and 215/45 rears.
215/40 worked for me and Im sure Chris's height is about the same as mine. Only down side is that going for a 40 profile is that it threw my speedo out a little.

If you're rubbing when you're turning then try putting the dampers up. if its on max then go for 215/40.
I honestly wouldnt go any lower than 215/40 as it is skinny enough. I used to have the same problem and going from
a 45 profile to a 40 profile made a HUGE difference.

[autobach]

Go for 215/40 front and 215/45 rears.
215/40 worked for me and Im sure Chris's height is about the same as mine. Only down side is that going for a 40 profile is that it threw my speedo out a little.

If you're rubbing when you're turning then try putting the dampers up. if its on max then go for 215/40.
I honestly wouldnt go any lower than 215/40 as it is skinny enough. I used to have the same problem and going from
a 45 profile to a 40 profile made a HUGE difference.

Good idea on the front and rear setup.
By swapping to 215/40 on my front wheels, wheel calculator is showing ~-5% reading on the speedo. 215/45 is ~-1.5%. My preference is actually 225/40 but is rare to find em'.
I hope to achieve a setup with lowest possible diameter while maintaining the grip with those 17x8 38+ enkei rims.
Do you know anyone with mugen suspensions on their fd? The springs + struts non-adjustable ( i read damper is 5 click adjustable). Just wanna find out anyone swap them springs with others brands.

[Honda_FD]

Good idea on the front and rear setup.
By swapping to 215/40 on my front wheels, wheel calculator is showing ~-5% reading on the speedo. 215/45 is ~-1.5%. My preference is actually 225/40 but is rare to find em'.
I hope to achieve a setup with lowest possible diameter while maintaining the grip with those 17x8 38+ enkei rims.
Do you know anyone with mugen suspensions on their fd? The springs + struts non-adjustable ( i read damper is 5 click adjustable). Just wanna find out anyone swap them springs with others brands.

Why do you want to get a small diameter? Hitting potholes and bumps with small profile tyres are noisy and can easily damage the rim.
Generally swapping springs can be done on any Suspension system. Even on coilovers so I dont see any problems with changing yours.
Our rear is separate so that shouldnt be a problem. Only 1 bolt and it comes out. Just take it to a Suspension specialist just to confirm.

What state do you live in?

[jprak]

http://img.tapatalk.com/d/14/08/12/bygyje3e.jpg

Dis my car wen lite up at nyt

No h8 plz

<3

[autobach]

I am from Perth WA. Sorry for the no intro and popping out of nowhere but have been avid fans of Ozhonda members rides. I just brought my fd1 about 3 weeks ago. First mod in was the mugen showa coilovers and then the 17x8 enkei.
Perhaps i should rephrase" smallest wheel diameter" to best tyres size for handling and looks based on 17x8 rims. I really adore the setup that you and chrischris have but i don't think i can pull it off knowing lowering springs will take 1-2inch off. Hence trying to go lower by changing tyres size without touching the springs or affect the ride too much. I do agree with you that my springs could possibly be swapped.

I was inspired by the first FD Type R concept by SPOON based on a FD1 chasis many years ago. They had a F20 head on a K20a block inside.

[lolmclol]

http://img.tapatalk.com/d/14/08/12/bygyje3e.jpg

Dis my car wen lite up at nyt

No h8 plz

<3

http://cdn0.vox-cdn.com/uploads/chorus_image/image/60959/hate_hate_hate_standard_1348621435_730.jpg








Natsrs, coming together nicely man, not far to go now ;-)

[jprak]

http://cdn0.vox-cdn.com/uploads/chorus_image/image/60959/hate_hate_hate_standard_1348621435_730.jpg







Natsrs, coming together nicely man, not far to go now ;-)


nah man! too many stuff to do!
interior gotta be finished
exterior parts coming over from JPN
new paint for whole car (already decided)
gonna run my old BBS wheels (Y)

[autobach]

Hi fellow FDs owner,

Got a few question in relation to swapping seats on fd vtil and sport.

1) Which manufacturing year fd vti does not have side airbags or OPDS?

2) Is the SRS module unit connect to the ECU of the car?

3) Will i have any issue if i swap my current vtil SRS module unit with a non side airbags SRS module unit say from 2006 VTI civic? Non-crashed SRS unit of course.

4) Also anyone know or tried to swap Integra Type S seats with airbags and OPDS into a FD VTIL or Sport? Any issue with the SRS unit registering the new seats?

Thanks and look forward to inputs from experienced FD gurus

[Honda_FD]

I am from Perth WA. Sorry for the no intro and popping out of nowhere but have been avid fans of Ozhonda members rides. I just brought my fd1 about 3 weeks ago. First mod in was the mugen showa coilovers and then the 17x8 enkei.
Perhaps i should rephrase" smallest wheel diameter" to best tyres size for handling and looks based on 17x8 rims. I really adore the setup that you and chrischris have but i don't think i can pull it off knowing lowering springs will take 1-2inch off. Hence trying to go lower by changing tyres size without touching the springs or affect the ride too much. I do agree with you that my springs could possibly be swapped.

I was inspired by the first FD Type R concept by SPOON based on a FD1 chasis many years ago. They had a F20 head on a K20a block inside.

If you are going for a functional build then I would go for something around 215/45, 225/45 or 225/40.
In order for your car to handle better you need as much contact to the road as possible. So chunky tyres is a must.
But even 215/45 on an 8" Wide rim isnt even chunky.
Its hard to get best of both worlds. Its either built to Function or Hard Parked.

----------------------------------

@JPrak
M8, Join the club and get HIDs!

[autobach]

Agreed, it's hard to get best of both world. I will try 215/45 and maybe move to 225/45 later stages. Thank you for your advices there are valuable to me

[Honda_FD]

Agreed, it's hard to get best of both world. I will try 215/45 and maybe move to 225/45 later stages. Thank you for your advices there are valuable to me

All good.
As of your Seats question. A member did a FN2R seat change in his FD. Not sure if he had Airbags in his original seats
but he had to pay about $500 to get the FN2R seats in his car. Think JPrak had to do the same but with his Recaro seats.

I swapped my driver seat to a Recaro seat and currently driving with my SRS light on. Doesnt bother me as much
but will be getting a resistor sooner or later to get rid of the light. Right now its throwing the code out and bags wont deploy if I get into an accident.
But then again. Safety is for faggots anyways cause #YOLO.

Jokesss Lol. Just havent had time to get the resistor yet.

http://i194.photobucket.com/albums/z236/crazyazn312/10555130_10152241974395794_1947101113_n.jpg

[autobach]

Sometimes we all like to live on the edge LOL
Anyway, correct me if i am wrong but the resistor is just to bypass the side airbags for both driver and passenger seat but to bypass the OPDS on the passenger seat is whole different story.

From what i know the below method to bypass the OPDS;

1) Take the OPDS and sensors from original seat and stuck it to the aftermarket seat. ( Read a Accord Euro CL doing this)
2) Buy a pair of FD2R seats and basically plug everything in ( rail mods required i believe) ( i have also read USDM Honda Fit with SI seats-apparently their current SRS modules accepts the new seats)

I am investigating the below unproven possibilities:

1) Swapping out the SRS module to a non side airbag SRS module ( say 2006 VTI civic)
2) Swap Integra Type S seats w/ side airbags OPDS

Please to hear any comments from fellow members

[SharkChu]

So I did something similar to this about 2 weeks ago to my car, I'll try answer your questions for you.


Hi fellow FDs owner,

Got a few question in relation to swapping seats on fd vtil and sport.

1) Which manufacturing year fd vti does not have side airbags or OPDS?
Pre-facelift 2006 to 2008, has no side airbags in their vti models, correct me if I'm wrong

2) Is the SRS module unit connect to the ECU of the car?
There's apparently a control unit in each seat which communicates to the computer of the car, (abit vague, i'm not sure if its srs/ecu modules)

3) Will i have any issue if i swap my current vtil SRS module unit with a non side airbags SRS module unit say from 2006 VTI civic? Non-crashed SRS unit of course.

If you car comes with airbags, and you swap it to seats with no airbags, you will have the airbag light appearing. rendering ALL airbags off. I think your question refers to SRS itself to make it not even look for a side airbag right? Then not to sure, in theory it seems plausible.

4) Also anyone know or tried to swap Integra Type S seats with airbags and OPDS into a FD VTIL or Sport? Any issue with the SRS unit registering the new seats?

I swap, 2011 leather FD2 front seats, with my airbagged 2011 FD1 seats, and even though both contained airbags, and from same chassis, i still had the airbag light error. I took it to a work shop, resetting the code to clear it wasn't enough, the error just pops up again after you start your car again. Using the "paper clip" method, had the same result, the error appears.

I took it to Honda, paid about 130, they had to reinitialise the unit (i guess format it), and then reset it (match it with the cars unit). And it worked fine. NOTE: if you do go this option, make sure to get the VIN number of the car you're getting the seats from, it assists Honda with the process.

Thanks and look forward to inputs from experienced FD gurus

Ain't a guru, but You're welcome :D


Sometimes we all like to live on the edge LOL
Anyway, correct me if i am wrong but the resistor is just to bypass the side airbags for both driver and passenger seat but to bypass the OPDS on the passenger seat is whole different story.

From what i know the below method to bypass the OPDS;

1) Take the OPDS and sensors from original seat and stuck it to the aftermarket seat. ( Read a Accord Euro CL doing this)
I was on mightcarmods forum, and milkchicken (honda fanatic) told me of the same process, remove the control unit in each seat, and shove it in the aftermarkets, to make the computer think it's still connected to the factory ones. Was going to do it, but didn't like the idea of chopping up my stock seats (head onto 8thcivic, there's a DIY .pdf file that shows you step by step in taking apart your seat), and the fact it would be time consuming.

2) Buy a pair of FD2R seats and basically plug everything in ( rail mods required i believe) ( i have also read USDM Honda Fit with SI seats-apparently their current SRS modules accepts the new seats)

JDM FD2R seats do not have airbags, from memory

I am investigating the below unproven possibilities:

1) Swapping out the SRS module to a non side airbag SRS module ( say 2006 VTI civic)
In theory, yes.

2) Swap Integra Type S seats w/ side airbags OPDS

I wanted to swap FN2R seats, which have airbags, and pretty sure I have to take it to honda to do the same process. I'm not sure seats from a different model car would communicate the same.. as mine was from a FD2 to FD1, so I assume it was be kinda of more simple.



All good.
As of your Seats question. A member did a FN2R seat change in his FD. Not sure if he had Airbags in his original seats
but he had to pay about $500 to get the FN2R seats in his car. Think JPrak had to do the same but with his Recaro seats.


The member was DUFFY_FD, he didn't have side airbags in his original seats.
Jprak, also didn't have side airbags in his stock seats either.
Thus, neither had the airbag light error.




Hope my answers are helpful, I spent weeks of research, but couldn't get a definite answer, but I really wanted the leather, so I just yolo. Hope the above helps fellow/future FD owners.

[jprak]

Duffy_FD and me had to do custom rails as it wasnt a both straight bolt on
he had the FN2R seats while i had the evo ones.

M8, Join the club and get HIDs!
BAO BRAH! HIDs on our FDs are bright as ****...i hate it LOL!

[Honda_FD]

BAO BRAH! HIDs on our FDs are bright as ****...i hate it LOL!

Not even brooo. I point mine down and doesnt blind anyone. Get 6000k HIDs!
I got them pointed down before I started modifying my car and because my car is
lowered now I can barely see ahead of me lol. Can probably see 5m ahead of me? Or even less.
Need to readjust them but no time

Im thinking about retrofitting projector lights in.
Anyone recommend a good brand for projector lens?
Or should I just buy S2000 lens? Heard They're one of the best?

[SharkChu]

Not even brooo. I point mine down and doesnt blind anyone.
I got them pointed down before I started modifying my car and because my car is
lowered now I can barely see ahead of me lol. Can probably see 5m ahead of me? Or even less.
Need to readjust them but no time

Im thinking about retrofitting projector lights in.
Anyone recommend a good brand for projector lens?
Or should I just buy S2000 lens? Heard They're one of the best?

I didn't adjust my headlights when i first put HIDs in, and already it was pointing slightly closer than halogens. My HIDs in my foglights were more blinding than the HIDs in the low beams..

Retrofitting is good, just go TheRetrofitSource, they are quite pricey and the Quality control isn't the best, but they've ironed out a lot of the issues by now. It's a good read, talks about all the diff types of lenses/projectors, and yes the s2000 are great.

[*DAN*]

Not even brooo. I point mine down and doesnt blind anyone. Get 6000k HIDs!
I got them pointed down before I started modifying my car and because my car is
lowered now I can barely see ahead of me lol. Can probably see 5m ahead of me? Or even less.
Need to readjust them but no time

Im thinking about retrofitting projector lights in.
Anyone recommend a good brand for projector lens?
Or should I just buy S2000 lens? Heard They're one of the best?

Definitely s2000 lens or any other OEM honda projector and retro fitting. Could even paint your housing black if thats your thing :D

[Honda_FD]

Definitely s2000 lens or any other OEM honda projector and retro fitting. Could even paint your housing black if thats your thing :D

Thats the plan ;)
But first thing first. Got to order new springs from BC Racing.
Gunna YOLO and go 12kg rear springs and 12 or 14kg fronts.
The rubbing is starting to annoy me

Cheaper than getting Camber arms lol

[autobach]

SharkChu thanks for the input and congrats on the seat swap. I have also been researching for quite sometime on this matter.

I need to apologise as I stated wrongly on the fn2r seats..they do come with airbags n opds. I think with your recent experiences its proven that the srs module cannot interact directly with either a different airbag or opds from another car without resetting.

The only option yet to be tested is swapping a non airbag srs module unit. Hence I am curious if the module itself is connected to the car ecu. From my research the module itself its not cheap as wreckers have many that are not usable due to airbags deployed during accident. It would be great if someone with this valuable knowledge can shed some light.

[SharkChu]

SharkChu thanks for the input and congrats on the seat swap. I have also been researching for quite sometime on this matter.

I need to apologise as I stated wrongly on the fn2r seats..they do come with airbags n opds. I think with your recent experiences its proven that the srs module cannot interact directly with either a different airbag or opds from another car without resetting.

The only option yet to be tested is swapping a non airbag srs module unit. Hence I am curious if the module itself is connected to the car ecu. From my research the module itself its not cheap as wreckers have many that are not usable due to airbags deployed during accident. It would be great if someone with this valuable knowledge can shed some light.

Np, are you in Sydney?

Cause I've seen plenty of wreckers that have FDs that have their airbags still intact. Not sure about cost though..

[autobach]

Unfortunately im in Perth WA. I am actually looking for a used fd sport steering without airbag. I have a thing for leather as well LOL lemme know if anyone can source one for me..cant find much fd wrecking here

[NeedVtec]

Any of you guys got aftermarket pedals?

[lolmclol]

Unfortunately im in Perth WA. I am actually looking for a used fd sport steering without airbag. I have a thing for leather as well LOL lemme know if anyone can source one for me..cant find much fd wrecking here

There was one on Gumtree that was down rockingham way, if I remember correctly, not sure what model it was though.


Any of you guys got aftermarket pedals?

Mugen?

If so, they trap dirt real easy, I'd recommend looking at either strutking or dc5r/ dc5s pedals.

[threesix]

http://img.tapatalk.com/d/14/08/12/bygyje3e.jpg

Dis my car wen lite up at nyt

No h8 plz

<3

My hate was only to motivate (or something like that. Everyone's seen the DGK stickers)

BUT!! When it's finished (or at least painted) I will be eating my words. Or I can post a video of me punching myself in the dick really hard)

You'll probably have the best FD in AUS

[jprak]

I got mugen pedals
Get them pedals dirty and wear my shoes uneven
Lelz

What you guys think Evo gsr or mr recaros (9)

Thinking changing my Evo 7 ones


Threesix trust me I'm waiting for the day I get my car painted completely I hate it looking that. I'll be honest but it shits me seeing it like this.

Just few parts from japan and stuff from aus and should be good to go man. I'm putting too much $$ into detail esp in the interior, think I went over board on interior from Jpn LOL.

[FDYOU2]

nah man! too many stuff to do!
interior gotta be finished
exterior parts coming over from JPN
new paint for whole car (already decided)
gonna run my old BBS wheels (Y)

You painting it blue? That'll be something different. Have not seen many blue FDs around yet alone a done up one.

[Honda_FD]

What you guys think Evo gsr or mr recaros (9)

Thinking changing my Evo 7 ones

Evo 8 MR For the stealthy look! I've sat in both and personally like the MR Recaros better.
Bolsters are slightly bigger and holds you in better. Kinda squishes my balls though.

[autobach]

There was one on Gumtree that was down rockingham way, if I remember correctly, not sure what model it was though.



Mugen?

If so, they trap dirt real easy, I'd recommend looking at either strutking or dc5r/ dc5s pedals.

I rang the same day they sold it. It was a sport vers though

[Honda_FD]

Is there any difference between Blue and Gold HardRace Rear Camber arms?
Or are they both the same but just different colours?
Both will fit our FDs right?

Blue -
http://www.ebay.com.au/itm/HARDRACE-REAR-Adjustable-CAMBER-KIT-w-Hardened-Rubber-Honda-CIVIC-FD-Si-HR6999-/271328969111?pt=AU_Car_Parts_Accessories&hash=item3f2c778197&_uhb=1

Gold -
http://www.ebay.com.au/itm/HARDRACE-REAR-CAMBER-KIT-w-Hardened-Rubber-GOLD-Honda-CIVIC-FD-Si-HR6999-G-/271290973943?pt=AU_Car_Parts_Accessories&hash=item3f2a33bef7&_uhb=1

[jprak]

Is there any difference between Blue and Gold HardRace Rear Camber arms?
Or are they both the same but just different colours?
Both will fit our FDs right?

Blue -
http://www.ebay.com.au/itm/HARDRACE-REAR-Adjustable-CAMBER-KIT-w-Hardened-Rubber-Honda-CIVIC-FD-Si-HR6999-/271328969111?pt=AU_Car_Parts_Accessories&hash=item3f2c778197&_uhb=1

Gold -
http://www.ebay.com.au/itm/HARDRACE-REAR-CAMBER-KIT-w-Hardened-Rubber-GOLD-Honda-CIVIC-FD-Si-HR6999-G-/271290973943?pt=AU_Car_Parts_Accessories&hash=item3f2a33bef7&_uhb=1


both same?? i see no difference...

i got the old ver. of the camber arms <.<

http://www.velocityshop.com/images/products/1272156242-hr-camber-re-cvc-fd-1.jpg

[Honda_FD]

both same?? i see no difference...

i got the old ver. of the camber arms <.<

Oh okay. Do you know how many degrees they max out at?
I've already ordered the blue one. Should be here in a few days

[jprak]

Oh okay. Do you know how many degrees they max out at?
I've already ordered the blue one. Should be here in a few days

cant find any details but i know it goes more then jamie's fd went.

[Honda_FD]

cant find any details but i know it goes more then jamie's fd went.

Awesome. The wheels were rubbing so much that I raised my rear end 35mm just to shut it up for now.

[jprak]

Awesome. The wheels were rubbing so much that I raised my rear end 35mm just to shut it up for now.

NO! LOWER NOW!
lol i need new wheels<.<

gonna run my old BBS again :L, mate letting me borrow them (Y)

[*DAN*]

Awesome. The wheels were rubbing so much that I raised my rear end 35mm just to shut it up for now.

youd keep rubbing if you were a real man

[Honda_FD]

@DAN Lol ***** please!
--------------------------------------

You guys know whats the lowest bolt on spacers we can run?
Looking into 15mm bolt on spacers but heard some cars need to trim their stock studs to put wheels on.
Would 15mm clear our studs?

[jprak]

Might buy this

BWR made rear subframe for 06+ civic

http://img.tapatalk.com/d/14/08/17/usuhyqa7.jpg

[kikimushroom]

Did you get your spanners back Hondafd?

[Honda_FD]

Did you get your spanners back Hondafd?

Yeah. The renovators had it. Bastards..


Might buy this

BWR made rear subframe for 06+ civic

Ohhhhh!! Where?! BWR USA?
Any LCAs?

[jprak]

Yeah. The renovators had it. Bastards..



Ohhhhh!! Where?! BWR USA?

yea BWR USA, gonna order mine when the account is fixed, couldnt complete registration

[EKVTIR-T]

are you track your car jprak?

[jprak]

are you track your car jprak?

efame brah ! ahahah dbout i can go track with bags unless aircups

[Honda_FD]

yea BWR USA, gonna order mine when the account is fixed, couldnt complete registration

Im gunna look into it tomorrow and ask my friends. They distribute BWR so gunna go ask them.
If no LCAs then Im gunna Polish my OEM LCAs

[jprak]

Im gunna look into it tomorrow and ask my friends. They distribute BWR so gunna go ask them.
If no LCAs then Im gunna Polish my OEM LCAs

let me know how much, ill buizz

[Honda_FD]

let me know how much, ill buizz

$240 delivered
Hes checking if it is made for the 8th/9th Gen as it says 06-14.

8th Gen and 9th Gen have same subframe?

[FDYOU2]

Carbon J's Lip arrived this morning. Slight modifications to get it to fit.

https://scontent-b-lax.xx.fbcdn.net/hphotos-xfp1/l/t1.0-9/10406605_10152637861544763_2667074706085619041_n.j pg

[jprak]

Lol looks like our cars the same XD

[FDYOU2]

Lol looks like our cars the same XD

You getting panels from jap? Getting them vented fenders? that's the only panels i can think of.

[jprak]

Getting few bits and pieces from japan

http://img.tapatalk.com/d/14/08/19/ba7yvaze.jpg

Just bought FD2R steering wheel

[FDYOU2]

Getting few bits and pieces from japan

http://img.tapatalk.com/d/14/08/19/ba7yvaze.jpg

Just bought FD2R steering wheel

Really want recaros in my fd2 but heard the airbags are a bitch to deal with. Plus side of having a fd1.

[Honda_FD]

Really want recaros in my fd2 but heard the airbags are a bitch to deal with. Plus side of having a fd1.

Nahh Easy as. Buy Recaros and Rails and its direct fit. Buy the required resistor and plug it into the airbag plug.
Resistor only costs .90c.

@JPrak Did you change your door skin aswell? Looks different

[jprak]

Yeah Fd2R door trims

Currently experimenting my spare door trims

http://img.tapatalk.com/d/14/08/19/a5eru2y9.jpg

[chrischris]

@DAN Lol ***** please!
--------------------------------------

You guys know whats the lowest bolt on spacers we can run?
Looking into 15mm bolt on spacers but heard some cars need to trim their stock studs to put wheels on.
Would 15mm clear our studs?

depending on your wheels you dont need to cut the studs. if your wheels have the small gap next to where the stud goes through http://mbworld.org/forums/attachments/c63-amg-w204/242991d1346986092-fs-akropovic-evolution-exhaust-oem-19-multipsoke-rims-back.jpg

[integraR]

Yeah Fd2R door trims

Currently experimenting my spare door trims

http://img.tapatalk.com/d/14/08/19/a5eru2y9.jpg


deets on where to acquire fabric, (the 2nd one from left)

[threesix]

http://i745.photobucket.com/albums/xx93/getbuck_2010/2014-08/3DE605B6-3799-493D-BAA9-1B7318834F1C_zpsigimpiwl.jpg

Love love love

[jprak]

deets on where to acquire fabric, (the 2nd one from left)

It's from spotlight

[chrischris]

Where can I get some cheap side skirts (melb)? Mars performance has some mugen ones for 300$

[jprak]

Ontherunmotorsport sells them

[Honda_FD]

OTR is about the same.

[NeedVtec]

Thinking of injecting my mounts or at least the dog bone, what ya reckon boyzzzzzz?

[lolmclol]

Too much effort etc

It will reduce any movement from the engine, but in return it will increase vibrations transfered to the chassis at selected RPMs, as well as overall cruising noise.

It won't improve your performance and it certainly won't improve your comfort while driving. You'll almost certainly want to buy an extra mount to do it as you should let it cure for a period of time before using the mount again.

Overall, its more effort than its worth and its only worth it if you're planning on tracking your car.

[NeedVtec]

Thinking of doing just the dog bone which is an easy job to increase dem shifter feeeelz and reduce the bunny hopping

[lolmclol]

Yeah the bunny hopping is pretty annoying at times, if you are committed definitely get an extra mount to try it out, so if you don't like it you can switch back. You do get people say that once its worn in, its not as bad, but I think its more the fact people get used to the extra noise and vibrations.

For me when I tried it with a different mount, the extra vibrations and the fact the whole dash would rattle made me switch back to stock.

[NeedVtec]

Yh nh if dash rattles will def go back to stock

[kikimushroom]

https://www.facebook.com/groups/792244690790467/permalink/940078059340462/

genuine mugen rr bumper..

[jprak]

https://www.facebook.com/groups/792244690790467/permalink/940078059340462/

genuine mugen rr bumper..

Too bad won't fit our fenders

[nedkerry]

Hey guys! Back in Melbourne after 3 weeks of holidays and body clock readjustments :P

What's going on? :)
I saw Honda_FD attend the TPNM 3rd Birthday!

[chrischris]

Hey guys! Back in Melbourne after 3 weeks of holidays and body clock readjustments :P

What's going on? :)
I saw Honda_FD attend the TPNM 3rd Birthday!


I might be selling the FD and getting a alfa 147 gta, have wanted a manual car for a while now

[Honda_FD]

I might be selling the FD and getting a alfa 147 gta, have wanted a manual car for a while now

Get a manual FD! :)

[lolmclol]

Guies I spotted a real type r!

http://s27.postimg.org/wqacotq5v/IMG_20140826_133528.jpg

[jprak]

Dats me

[lolmclol]

That repainted rear end for extra multitone

;-)

[autobach]

Kindly asking if you have any suggestions to bypass the OPDS module + sensors on the passenger's side beside removing them and installing em on the recaros? This is all based on fds with side airbags + OPDS.

[Honda_FD]

Kindly asking if you have any suggestions to bypass the OPDS module + sensors on the passenger's side beside removing them and installing em on the recaros? This is all based on fds with side airbags + OPDS.


http://www.8thcivic.com/forums/inside-out/295298-official-everything-about-fooling-opds-thread-aftermarket-seats.html

Not sure if its exactly the same as our but. Have a read

[FDYOU2]

New plates ordered. Will match nicely with my bronze TE37SLs

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10580865_10152655296419763_4453654088817285635_o.j pg

[jprak]

New plates ordered. Will match nicely with my bronze TE37SLs

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10580865_10152655296419763_4453654088817285635_o.j pg

Nice I'm still deciding on what plates to get as well.

Did TE37SLs came in bronze? Thought they came in dark grey or something
Someone please confirm for me

[iou]

Nice I'm still deciding on what plates to get as well.

Did TE37SLs came in bronze? Thought they came in dark grey or something
Someone please confirm for me

They do come with bronze.

http://i.imgur.com/Oz6Pkuf.jpg

But if order brand new there are only 2 colours. Grey and Black

[iou]

New plates ordered. Will match nicely with my bronze TE37SLs



What offset are you gonna get and what tyres your set up?

[LetsDuDiss]

New plates ordered. Will match nicely with my bronze TE37SLs

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10580865_10152655296419763_4453654088817285635_o.j pg

Shouldve made it FD.YOU2 =P

[curtis265]

Thinking of injecting my mounts or at least the dog bone, what ya reckon boyzzzzzz?

i'd never

but thats because i'm too flaccid

[FDYOU2]

Shouldve made it FD.YOU2 =P

In Sydney if we get personalised plus is $500 annual fee.

[Honda_FD]

If my 3 piece Work Meister is leaking air out of a few bolts does that mean I need to take it apart and reseal the lip and barrel? Both rear rims has an airleak

[NeedVtec]

i'd never

but thats because i'm too flaccid

Floppy disk syndrome aye

Gonna look for spare one just in case I don't like it

[curtis265]

Floppy disk syndrome aye

Gonna look for spare one just in case I don't like it

wise idea milk

lmzo gotta love wheelhop and shaking dash

[NeedVtec]

wise idea milk

lmzo gotta love wheelhop and shaking dash

Yeh fkn coins falling out of the pocket as well

[stevo1210]

Got Honda Ultra FEO and OEM filter a few weeks ago and planned to do an oil change this week but no, it's pouring with rain AGAIN wtf.

sigh...

Everytime I plan to do it... it pours with rain.

Hoping it clears up on Monday though.

[davek]

Will a rear sway bar from a USA civic fit a FD?

[*DAN*]

Will a rear sway bar from a USA civic fit a FD?

If its the same chassis then yes it should

[Honda_FD]

Will a rear sway bar from a USA civic fit a FD?

The FA SHOULD fit.
FG wont fit

[FDYOU2]

Anyone know how or where I can change the dashboard/cluster light red?

[davek]

http://www.8thcivic.com/forums/diy-honda-civic-interior-style-mods/98461-diy-changing-out-switch-dash-lights-red-blue.html

[chrischris]

I've bought another car so the FD will go up for sale soon. Anybody after some coilovers? They are neomaxR (http://www.ontherunmotorsports.com/index.php?option=com_content&view=article&id=327&catid=41&Itemid=75).
My current set up
http://imgur.com/ZmDN1Dl.jpeg
65mm clearance.

Front maxed out
http://m.imgur.com/I2bJrKD.jpeg

[kikimushroom]

what car?

[chrischris]

i have wanted to learn manual for a long time so i wanted to buy a new car. My first car was a selespeed alfa 147 and i loved it. This time i bought a alfa 147 GTA

havent had a chance to take a good picture of the car, but its exactly like this http://img337.imageshack.us/img337/1950/alfa1uh0.jpg
http://img208.imageshack.us/img208/5039/alfa5tv1.jpg

[EKVTIR-T]

congrats,interesting choice there

best of luck :)

[Kienn.]

Hey guys im planning to do an oil change along with the transmission fluid for my fd1. Roughly how much transmission fluid do i need ?? cause I don't want to buy a 4L bottle from Honda when Im only going to be using 2.. Thanks

[threesix]

i have wanted to learn manual for a long time so i wanted to buy a new car. My first car was a selespeed alfa 147 and i loved it. This time i bought a alfa 147 GTA

havent had a chance to take a good picture of the car, but its exactly like this http://img337.imageshack.us/img337/1950/alfa1uh0.jpg
http://img208.imageshack.us/img208/5039/alfa5tv1.jpg

sick choice. please dump it on its guts. always loved those wheels. good stockies.

[*DAN*]

Don't stance a car like that! Go all out functional imho :)

[threesix]

lowering your car on stock wheels = stance???? : /

[threesix]

I really wanna get a lip kit. Don't really wanna lower it any more but want more low looks. Any suggestions?
http://i33.photobucket.com/albums/d90/187AK/6D1FCB85-735C-4CEF-80AD-06F560ECDA80.jpg

[lolmclol]

Mugen

http://s30.postimg.org/wvrj1nw41/images_q_tbn_ANd9_Gc_Renb_BNJcd_IPHQokij_Qn_bkto40 j_J.jpg

[threesix]

thats just the front lip right?

spose it doesnt need sides. just front and rear.

but yeah.. lolmclol thats Mugen is perfect.

[threesix]

http://i745.photobucket.com/albums/xx93/getbuck_2010/ricenice_zps16df5499.jpg

if this is static i will suck my own pee pee

[jprak]

Get mugen front side and RR rear like I did

Lol!

I'm parting out my side skirts cause me finding type r one

http://tapatalk.imageshack.com/v2/14/09/03/45eab453495c3ae4236cccfd586ef1df.jpg

http://tapatalk.imageshack.com/v2/14/09/03/d058283dd83df709e8da461d90040797.jpg

http://tapatalk.imageshack.com/v2/14/09/03/739a21475289d6149aaf0d2a274d91d2.jpg

[lolmclol]

thats just the front lip right?

spose it doesnt need sides. just front and rear.

but yeah.. lolmclol thats Mugen is perfect.

Whoops, yeah the car in that picture only has the front lip.

Yeah it comes as a full kit and as jprak said its pretty much mugen preface lift front lip, then the side skirts and rear lip are the same as the mugen facelift and mugen RR.

[chrischris]

I really wanna get a lip kit. Don't really wanna lower it any more but want more low looks. Any suggestions?
http://i33.photobucket.com/albums/d90/187AK/6D1FCB85-735C-4CEF-80AD-06F560ECDA80.jpg

Do you want a cracked mugen front lip? Unpainted, you can have it for 40$ and zip tie the cracks and spray it. I never got around to it and now I'm seeking the car, plus I have some brand new type BM sideskirts unpainted if anyone is interested for 100$

[chrischris]

sick choice. please dump it on its guts. always loved those wheels. good stockies.

I'm gonna keep it stock for a while. The massive power difference for the FD is enough for now. And Im learning manual on it so its heaps of fun. In a few months ill try find some coilovers and some wide rims

[threesix]

I'm gonna keep it stock for a while. The massive power difference for the FD is enough for now. And Im learning manual on it so its heaps of fun. In a few months ill try find some coilovers and some wide rims

dat stance :)

[threesix]

love the Mugen front. not a fan of the sides or the RR back. blah.

[Honda_FD]

I'm gonna keep it stock for a while. The massive power difference for the FD is enough for now. And Im learning manual on it so its heaps of fun. In a few months ill try find some coilovers and some wide rims

Do intake and exhaust. Get a bit of sound in there.


love the Mugen front. not a fan of the sides or the RR back. blah.

You're like me. I dont like Mugen lip kit. RR is too common.
I personally like the Type R and the Modulo kit.

[curtis265]

nice alfa-lmao!

My cousin had a 156 selespeed, it was slow but sounded amazing, and the interior was butiful

good choice. Hope yours lasts.

[autobach]

Get mugen front side and RR rear like I did

Lol!

I'm parting out my side skirts cause me finding type r one

http://tapatalk.imageshack.com/v2/14/09/03/45eab453495c3ae4236cccfd586ef1df.jpg

http://tapatalk.imageshack.com/v2/14/09/03/d058283dd83df709e8da461d90040797.jpg

http://tapatalk.imageshack.com/v2/14/09/03/739a21475289d6149aaf0d2a274d91d2.jpg

Hi Jpark, I always wonder if the mugen rr and the mugen has the same side skirts?

[jprak]

Same side skirts
Nothing different

[autobach]

Same side skirts
Nothing different

Thanks ! I saw a glimpse of your interior before, if not too troublesome can you show some pics of it, i am very interested in spraying all interior panels to satin black and changing the panels inserts to alcantara fabrics.

[jprak]

Heys my interior parts are OEM FD2R trims
I wanna spray my old ones black to test them

I'll get more pics aftrr

[iou]

Who is who :-)))))

http://tapatalk.imageshack.com/v2/14/09/04/fb739ca99eede7cf7ad961e7b5574201.jpg

[Honda_FD]

Who is who :-)))))

http://tapatalk.imageshack.com/v2/14/09/04/fb739ca99eede7cf7ad961e7b5574201.jpg

LOL That was so long ago! Woow
Jesus my car was high back then

[FDYOU2]

To the chick that drives the silver mugen rr fd that stopped at shell and asked us about me and my mates bonnets. You on here?

[jprak]

Hey ;)

[*DAN*]

So brought my car in to the dealership with the car slammed and everything and surprisingly there was no dramas. Even cable tied my loose wire for the varex for me. Mad +1 to westside honda in hoppers

[threesix]

http://i33.photobucket.com/albums/d90/187AK/1A5EA8BC-1893-47E9-A634-F0BCE3E588E8.jpg

Everyone should post a recent pic of their car! Or not lol

[Honda_FD]

Everyone should post a recent pic of their car! Or not lol

Mine still looks the same. Was running stock rear wheels for two wheels.
Looks cool with -3.5 degrees Camber. Full sunk in

[jprak]

Here's mine
http://tapatalk.imageshack.com/v2/14/09/05/9baf04539ee6c573a76e4d417acb0570.jpg


Lelz


Hmmm btw guys, EOI on my Evo 7 recaros with custom rails suit FD1/2

Rails will fit Evo 7-9 recaros

I'm going for a different direction with interior

[NeedVtec]

How much man, what was your situation with the srs light?

[jprak]

Prob sell 1.1k
I got no light cause I got a VTI
So no side airbags

You can buy a resistor or make it your own

[iou]

Here's mine........………................................... ..................i wish,haha

http://tapatalk.imageshack.com/v2/14/09/05/2aa56040b2b52de57714b9bf66ea8804.jpg

[threesix]

Mine still looks the same. Was running stock rear wheels for two wheels.
Looks cool with -3.5 degrees Camber. Full sunk in

I'd still like to see pics. Your a front runner on here.

[threesix]

Here's mine........………................................... ..................i wish,haha

http://tapatalk.imageshack.com/v2/14/09/05/2aa56040b2b52de57714b9bf66ea8804.jpg

Photoshop?

[iou]

Photoshop?
I think no :-) Why does it make you think so?
Nice tuck in under the guards hey?

What is your wheel spec 36, do u need to do any job or straight bolt on?

[Honda_FD]

I'd still like to see pics. Your a front runner on here.

Lol Nawww How kind of you :love:
Looking pretty shit though. Needs a wash and need to fix my front bumper. Its hanging on the other side
My opposite version of "Party at the front, Business at the back"
Just waiting to find the Modulo Side and rear

Does anyone know how many degrees HardRace V2 rear camber arms max out at? I cant even have 1 child in the back because of the rubbing.
Its fine without though

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/10355684_10152341679400794_4944004422071492897_o.j pg?oh=d4f16cb6751a74729f3be958a4a886d6&oe=540C6306&__gda__=1410092405_6bb5d4dbbbbdcc4ac15ade055f86fb4 1

[iou]

Nothing to show off guys?
Thinking to change tyres, too noisy. Is running kumho31. Any reccomendation for a better one :-)

[nedkerry]

Hey guys,
I got some FD parts for sale if anyone is interested (pick-up preferred):
http://www.ozhonda.com/forum/showthread.php?184039-CivicFD-Parts-4-Sale-Ralco-Pulley-Kit-DSpec-Throttle-Controller-Satechi-Soundfly

Ralco RZ Pulley Kit - $200
D-Spec Throttle Controller - $100
Satechi SoundFly - $30

[curtis265]

Nothing to show off guys?
Thinking to change tyres, too noisy. Is running kumho31. Any reccomendation for a better one :-)

ad08r

[FDYOU2]

Ying and Yang.

http://img.tapatalk.com/d/14/09/07/y2utynym.jpg

[SharkChu]

Ying and Yang.

http://img.tapatalk.com/d/14/09/07/y2utynym.jpg

More shots of your car,

Wheel specs? Springs? Coilovers?

And is that hood painted? I'm seriously considering getting one .

[Honda_FD]

Hey guys,
I got some FD parts for sale if anyone is interested (pick-up preferred):
http://www.ozhonda.com/forum/showthread.php?184039-CivicFD-Parts-4-Sale-Ralco-Pulley-Kit-DSpec-Throttle-Controller-Satechi-Soundfly

Ralco RZ Pulley Kit - $200
D-Spec Throttle Controller - $100
Satechi SoundFly - $30

I'll buy the Throttle control! Mates Rate?! ;)

[jprak]

More shots of your car,

Wheel specs? Springs? Coilovers?

And is that hood painted? I'm seriously considering getting one .

doesnt look painted, its a carbon hood.

looks good man...looks like mine except the multi color panels LOL

[FDYOU2]

More shots of your car,

Wheel specs? Springs? Coilovers?

And is that hood painted? I'm seriously considering getting one .

18x8 +40, hood is carbon fibre.

http://img.tapatalk.com/d/14/09/07/nepu8e2y.jpg

[itachi-kun]

Anyone want FD2R seats and Mugen RR bonnet?

FD2R Seats with rails, direct bolt on
Price: 1.1k ONO
https://scontent-b-sea.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/377947_10150605488931934_691809278_n.jpg?oh=c2bcc4 1bbb4007afdaf14009a05fadf4&oe=54956803

Mugen RR carbon fibre bonnet
Good fitment, bonnet is CF, vents are not CF
Price: 500 ONO
http://i.ebayimg.com/00/s/OTYwWDcxMg==/z/njIAAOSwRLZUCZj6/$_20.JPG
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xaf1/t31.0-8/194173_10151257305041934_1195918777_o.jpg

[iou]

ad08r
Thanks man. Will check the price

[iou]

18x8 +40, hood is carbon fibre.

http://img.tapatalk.com/d/14/09/07/nepu8e2y.jpg

What spec of tyres are you running? How do you feel when running 18" wheels? My one only 17" and i feel like i'm riding on a horse.
Honda_FD: it's time to have another fun with throttle controller ;-)

[FDYOU2]

What spec of tyres are you running? How do you feel when running 18" wheels? My one only 17" and i feel like i'm riding on a horse.
Honda_FD: it's time to have another fun with throttle controller ;-)

215/40 on the front (rubbing fender with 225) and 225/40 at the back. It's not bad, drove my mates stock fd, not much difference. Probably depends on your suspension.

[threesix]

im in love.
http://i745.photobucket.com/albums/xx93/getbuck_2010/hotcivichonda_zps9a586e10.jpg

[Honda_FD]

Honda_FD: it's time to have another fun with throttle controller ;-)

Yup Yup :D
More vtec down Glengala Road so you can hear me at night hahaha

All these nice as FDs with Js lip. Makes me want one! Cant find a plastic one :(
Is there any other Stanced FDs on here? Feeling kinda lonely

[jprak]

^ just you and me ATM


Friend finished installing his bags last week. So there's. Two. People on bags in syd =P

Js lip too common man. I gotta change it up >.<

[nedkerry]

Yup Yup :D
More vtec down Glengala Road so you can hear me at night hahaha

All these nice as FDs with Js lip. Makes me want one! Cant find a plastic one :(
Is there any other Stanced FDs on here? Feeling kinda lonely

Throttle Controller sold to Honda_FD.

[Honda_FD]

Throttle Controller sold to Honda_FD.

Already? He sounds desperate...


^ just you and me ATM


Friend finished installing his bags last week. So there's. Two. People on bags in syd =P

Js lip too common man. I gotta change it up >.<

Never seen one in Melbourne.
Do you know how much negative camber you get when you airout?
i have -3.5 now and Its still rubbing. Might do -5 and more low. Cause yolo

[Honda_FD]

Just found this Article. Good ole days

http://www.the-lowdown.com/first-love-civic/

That 17x10-3

http://the-lowdown.com/media/areis-civic/8588940730_522b1a4d73_b.jpg

[jprak]

Just found this Article. Good ole days

http://www.the-lowdown.com/first-love-civic/

That 17x10-3

http://the-lowdown.com/media/areis-civic/8588940730_522b1a4d73_b.jpg

I got most of the stuff from it
Camber arms
Camber bolts
Bags

Will get a custom plate later =P

[Honda_FD]

I got most of the stuff from it
Camber arms
Camber bolts
Bags

Will get a custom plate later =P

Thought so. I was gunna buy his Intake

[jprak]

He sold his intake the day I took out his bags lol

[threesix]

[QUOTE=jprak;3921743]^ just you and me ATM


QUOTE]

im 18x9 -2 something pov stance. but yeah. i dont really count.

[Honda_FD]

im 18x9 -2 something pov stance. but yeah. i dont really count.

-2?! I thought it would poke heaps.
9+22 on DANs civic has heaps of poke. Would be awesome to have negative or even single digit offset

[threesix]

im +38 i think.

-2 is nothing?????

[threesix]

has anyone done any 0-100 tests???

[Vvvtec]

nice!

[jprak]

8.5 +30 or 9 +35 flush fitment

[threesix]

i bought mine off Dez....


Car Model: FD on SSR Vienna Kreis
Front Wheel and Tyre Size: 18x8 +38 215/40r18
Rear Wheel and Tyre Size: 18x9 +38 215/40r18
Suspension: coil-overs
Guard Modifications: all guards rolled.
Issues with Setup: no issues.

cept im just on springs

[Honda_FD]

im +38 i think.

-2 is nothing?????

Ohhh Lol Your previous comment looked like it it said 18x9-2
But your setup is fine as your car isnt as low. Think the kids would rather more comfort anyways

-2 off would be crazy poke on our civics.

My rears are 9.5+35
Would like the offset to be lower though. I was looking into getting 15mm bolt on spacers
But think my stock studs will be too long and touch the rim unless trim the studs or get new studs.

[*DAN*]

-2?! I thought it would poke heaps.
9+22 on DANs civic has heaps of poke. Would be awesome to have negative or even single digit offset

Its actually not that bad :)

fronts poke a bit with only -1 camber, around 1cm out?

rears are neaaarly in line with the guard (about 1-2mm off) with around -2.4 degrees camber

that said my guards have been pulled on all 4's so that probably helps a bit lol

[darktmt]

im able to get 2.5inch drop ebay springs for $100 and i have spring compressors.. do or not? apparently ****s up your strut real fast? the stock spring are also so soft... i have 245/45/17 tyres and they scrub everytime i turn but will change them if i get the springs

[jprak]

im able to get 2.5inch drop ebay springs for $100 and i have spring compressors.. do or not? apparently ****s up your strut real fast? the stock spring are also so soft... i have 245/45/17 tyres and they scrub everytime i turn but will change them if i get the springs

why not just spend abit more to get better brand springs. I got BWR springs 1.5" front and 1.4" rear with OEM shocks going for 200$.

yea 245 is pretty thick. get 225 or 215 if ya want

[threesix]

i got pedders springs and cut bump stops for $250 lolololololol

[Honda_FD]

im able to get 2.5inch drop ebay springs for $100 and i have spring compressors.. do or not? apparently ****s up your strut real fast? the stock spring are also so soft... i have 245/45/17 tyres and they scrub everytime i turn but will change them if i get the springs

2.5" Drop is alot for springs. Your shocks would probably last for 1 year depending on its condition now.
It would also be very noisy when you go over bumps. As your shocks will bottom out since it doesn't have much travel.

If you're on stock height now and it rubs. You will be lucky to be able to turn your wheel on a 2.5" drop with 245/45 tyres.
I would personally skip the springs and get smaller tyres. Worst case, You install your springs and the car is stuck and cant move because of your tyres.

I had 215/45 on 17x8+32 with 1.5" drop srpings and my car couldnt turn. Going straight was almost a mission. The slightest bump and the guards would smash against the tyre.

[threesix]

your guys tank is 35L right?

[Honda_FD]

your guys tank is 35L right?

Around there. I think 40L.
$65-$75 gets me a full tank of BP Ultimate.

[threesix]

$57 for a BP Utlimate full tank here in CBR. but i think my tank is smaller.

[Honda_FD]

$57 for a BP Utlimate full tank here in CBR. but i think my tank is smaller.

Your FD is a hybrid right?

[threesix]

yes sir.

[Honda_FD]

yes sir.

Thats probably why.
I finally put my rear wheels on today.
Those rears have spent more time off the car than on it.

Anyone here from Melbourne know how much it is to buy 1 slim license plate?
Same letters and number. My rear one cracked

[threesix]

well that makes me feel better. i just got 660 out of a tank.

also. MOAR pics of your car.

[Honda_FD]

well that makes me feel better. i just got 660 out of a tank.

also. MOAR pics of your car.

I dont get shit all from my tank. Too much hooning.
Cars dirty at the moment. Had a massive storm in Melbourne on Tuesday and havent had time to wash the car.

[threesix]

i wash mine every week. inside and out. OCD. but i think its because its so slow i want it to look 100% at all times lol

i had cops behind me yesterday in the rear view i could see them doing camber hands i thought for sure they would pull me over. drove straight past.

[Honda_FD]

i wash mine every week. inside and out. OCD. but i think its because its so slow i want it to look 100% at all times lol

i had cops behind me yesterday in the rear view i could see them doing camber hands i thought for sure they would pull me over. drove straight past.

Lol I TRY to wash my weekly. Just because we had a big storm on Tuesday and by the time I get home from work the sun is almost down.
So I leave it till the weekend. I put it under the veranda but it gets dusty.

[threesix]

yeah i have a car port. i dream of having a man cave one day. plus a backyard for my son :(

[Honda_FD]

One Day

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10610505_10152467101683355_5555414278278320695_n.j pg?oh=d8b5881bac96635664816d986ed438d5&oe=548A6340&__gda__=1419663637_87738d3f2278f3ebb88b8798e1541e4 d

[threesix]

better start moving work if you want that!!! lol

[envoytheguy]

2.5" Drop is alot for springs. Your shocks would probably last for 1 year depending on its condition now.
It would also be very noisy when you go over bumps. As your shocks will bottom out since it doesn't have much travel.

If you're on stock height now and it rubs. You will be lucky to be able to turn your wheel on a 2.5" drop with 245/45 tyres.
I would personally skip the springs and get smaller tyres. Worst case, You install your springs and the car is stuck and cant move because of your tyres.

I had 215/45 on 17x8+32 with 1.5" drop srpings and my car couldnt turn. Going straight was almost a mission. The slightest bump and the guards would smash against the tyre.

Thats a bit strange. I'm on 1.6" drop neuspeed springs + koni shocks with 17x8 + 38 225/45 and i have no problems. That extra offset surely cant make that big of a difference? All my guards are rolled (not pulled) though. I tested 17x9+35 225/45 and no problems either.

[Honda_FD]

Thats a bit strange. I'm on 1.6" drop neuspeed springs + koni shocks with 17x8 + 38 225/45 and i have no problems. That extra offset surely cant make that big of a difference? All my guards are rolled (not pulled) though. I tested 17x9+35 225/45 and no problems either.

This was ages ago. Had Eibach springs. Stock shocks. No guard modifications
with 215/45 tyres. I think its your Koni Shocks that made the difference.

My front guards pulled itself over the last year or so when I started going stanced.
If you look at my ca head on it looks like I have Widen/Flared guards. Looks pretty cool lol

[envoytheguy]

hahaha mine was stanced too, guards are all widened too so maybe thats why

[iou]

Mugen RR carbon fibre bonnet
Good fitment, bonnet is CF, vents are not CF
Price: 500 ONO
http://i.ebayimg.com/00/s/OTYwWDcxMg==/z/njIAAOSwRLZUCZj6/$_20.JPG
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xaf1/t31.0-8/194173_10151257305041934_1195918777_o.jpg

Would get it if you're in Mel, lol
Honda_FD: install throttle controller yet?

[Honda_FD]

Honda_FD: install throttle controller yet?

Yeah. NedKerry did it for me today. Its awesome. Noticeable difference.
Love it. Just need wire it to a switch or to my ignition as it doesnt turn off. No harm. Wont drain my battery but yeah.

I also bought a Recaro seat today :D Hehehe

SIKE! Its my new phone holder. HOW COOL IS IT?!

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/1609751_10152352032010794_1999335170033168912_n.jp g?oh=851de90d6895dd88394d9207f44ea728&oe=541563C8&__gda__=1410666627_93fff1a8aac03374d6acb0b2ebea03e 9

[iou]

Yeah. NedKerry did it for me today. Its awesome. Noticeable difference.
Love it. Just need wire it to a switch or to my ignition as it doesnt turn off. No harm. Wont drain my battery but yeah.

I also bought a Recaro seat today :D Hehehe

SIKE! Its my new phone holder. HOW COOL IS IT?!

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t34.0-12/1609751_10152352032010794_1999335170033168912_n.jp g?oh=851de90d6895dd88394d9207f44ea728&oe=541563C8&__gda__=1410666627_93fff1a8aac03374d6acb0b2ebea03e 9
What do you mean it turns off? My one doesn't need to do anything. Just plug in and have fun
Why your phone holder in the left handside? Is it not for you?

[Honda_FD]

What do you mean it turns off? My one doesn't need to do anything. Just plug in and have fun
Why your phone holder in the left handside? Is it not for you?

I dont know much about the details but it doesnt turn off when the car is off.

My brother was playing with it when I was driving.

[sohc_30]

Hi all. This is my first post in this forum. Just sharing my setup.

http://tapatalk.imageshack.com/v2/14/09/12/01efcfbda2fd5ebc7ae5de1f61ba6b01.jpg

http://tapatalk.imageshack.com/v2/14/09/12/0164f9749b7c85a01542ae9c737f1529.jpg

[nedkerry]

What do you mean it turns off? My one doesn't need to do anything. Just plug in and have fun
Why your phone holder in the left handside? Is it not for you?
It was like that when I first got the D1Spec controller. Most of the time, it doesn't know how to turn itself off when the ignition is off. Sometimes it knows how to.
It's not enough to drain your battery, but it's obviously not good. DIY switch should only cost a couple of dollars anyway.

[nedkerry]

Hi all. This is my first post in this forum. Just sharing my setup.

http://tapatalk.imageshack.com/v2/14/09/12/01efcfbda2fd5ebc7ae5de1f61ba6b01.jpg

http://tapatalk.imageshack.com/v2/14/09/12/0164f9749b7c85a01542ae9c737f1529.jpg

that's an awesome looking ride, dude! :D
welcome to the forum!
are those carbon fog lights?

[sohc_30]

Thanks. I'm not sure. Actually this bumper is from fdyou2. :cool:

[FDYOU2]

Hi all. This is my first post in this forum. Just sharing my setup.

http://tapatalk.imageshack.com/v2/14/09/12/01efcfbda2fd5ebc7ae5de1f61ba6b01.jpg

http://tapatalk.imageshack.com/v2/14/09/12/0164f9749b7c85a01542ae9c737f1529.jpg

Looking good man. Nice to see my front bumper has gone to good use. Sorta miss it now just looking at it haha.

[Honda_FD]

Finally able to take pictures now that my rear wheels are back on.
Wheels spent more time in the garage than on the car!

Got -5 degrees camber in the back now. Life is so much better having a car that low and being able to have people in the back

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/10507112_10152353885870794_1722127906946756457_o.j pg?oh=20d1f40d1d9f11fb8d35399ffdebcdba&oe=5416C0B9&__gda__=1410718154_0b602b1361b3b5f99541231c65d59d9 6

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/1492246_10152353886140794_431543269363911724_o.jpg ?oh=cc637a349e21fcf3b24517646abae632&oe=5416CCD7&__gda__=1410717569_bb4da956da189a10717da8e8b616ab8 8

[jprak]

Finally able to take pictures now that my rear wheels are back on.
Wheels spent more time in the garage than on the car!

Got -5 degrees camber in the back now. Life is so much better having a car that low and being able to have people in the back

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/10507112_10152353885870794_1722127906946756457_o.j pg?oh=20d1f40d1d9f11fb8d35399ffdebcdba&oe=5416C0B9&__gda__=1410718154_0b602b1361b3b5f99541231c65d59d9 6

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/1492246_10152353886140794_431543269363911724_o.jpg ?oh=cc637a349e21fcf3b24517646abae632&oe=5416CCD7&__gda__=1410717569_bb4da956da189a10717da8e8b616ab8 8




Buy my side skirts brah already painted

[Honda_FD]

Buy my side skirts brah already painted

Yeah? How much?

[jprak]

Yeah? How much?

100$ for side skirts

shipping I gotta confirm it via e-go

[nedkerry]

sohc_30, what brand/model are those seats?

[nedkerry]

Finally able to take pictures now that my rear wheels are back on.
Wheels spent more time in the garage than on the car!

Got -5 degrees camber in the back now. Life is so much better having a car that low and being able to have people in the back

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/10507112_10152353885870794_1722127906946756457_o.j pg?oh=20d1f40d1d9f11fb8d35399ffdebcdba&oe=5416C0B9&__gda__=1410718154_0b602b1361b3b5f99541231c65d59d9 6

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/1492246_10152353886140794_431543269363911724_o.jpg ?oh=cc637a349e21fcf3b24517646abae632&oe=5416CCD7&__gda__=1410717569_bb4da956da189a10717da8e8b616ab8 8

looks better in the flesh ;)

[Honda_FD]

100$ for side skirts

shipping I gotta confirm it via e-go

Keen. Can you confirm price when you're free please.

[jprak]

Keen. Can you confirm price when you're free please.

Yeah I'll measure it up

[Honda_FD]

looks better in the flesh ;)

The things I do for you! Drive right into the city! On the way over there was a cop behind me.
When I was looking at them in my rear view mirror I could see them pointing at the car and talking about the camber
as they were doing hand gestures of the bent wheels. Luckily they didnt do anything out it.


Yeah I'll measure it up

Sweet. Let me know. No rush

[threesix]

Finally able to take pictures now that my rear wheels are back on.
Wheels spent more time in the garage than on the car!

Got -5 degrees camber in the back now. Life is so much better having a car that low and being able to have people in the back

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/10507112_10152353885870794_1722127906946756457_o.j pg?oh=20d1f40d1d9f11fb8d35399ffdebcdba&oe=5416C0B9&__gda__=1410718154_0b602b1361b3b5f99541231c65d59d9 6

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t35.0-12/1492246_10152353886140794_431543269363911724_o.jpg ?oh=cc637a349e21fcf3b24517646abae632&oe=5416CCD7&__gda__=1410717569_bb4da956da189a10717da8e8b616ab8 8

Looks sooooooooo dope man. 10/10

[threesix]

And if you got side skirts you'd HAVE to get a rear lip. Would look weird without imo

[Honda_FD]

Yeah Lol. Im probably gunna get Modulo rear.
I've always wanted modulo and not many people have it.
Dont want Mugen or RR Rear as 8/10 modified FDs here have it. Want to be different. Not "Another FD with Mugen"
Plus, Its gunna cost the same if I get brandnew mugen rear.
Modulo is $400 fitted and painted

[NeedVtec]

Melb guys, anyone know the owner of a black fd with mugen rr kit in west suburbs of melbourne?
And unless my eyes playing tricks on me, I swear I saw a front mount...

[chrischris]

Cheap side skirts, 50$, s.e suburbs
http://i.imgur.com/joOspRR.jpg

[jprak]

^ bomex side skirts??

[Stevil]

Im lovin the wheels sohc_30 ! whats the colour ? I've just powdercoated a set SSR Type C's Flame red, gotta mount some rubber, will only be using them at the track thou.

[chrischris]

^ bomex side skirts??
Think they were called bm or something, I'm selling the civic so have no use for them

[NeedVtec]

Think they were called bm or something, I'm selling the civic so have no use for them

What else you parting out?


That roof spoiler looks alright *hint hint*

[jprak]

Judging by the code BM and style it's bomex for sure

[chrischris]

What else you parting out?


That roof spoiler looks alright *hint hint*
Not much, wheels and coils,someone is already lined up for coils, just have to finish taking them all out, car is on stands in the garage.
If your keen send me a pm. You'd need some new double sided tape. Its pretty good fitment

[Honda_FD]

So in Melbourne there's going to be a 4 Months Police Blitz.

"Drivers in Victoria will face the state's biggest-ever road blitz over summer, with police "locking down" suburbs and blitzing major roads across Melbourne.
Along with additional mobile speed cameras, radar guns, booze and drug buses, police will use every available local resource in a four-month campaign aimed at reducing road fatalities during the holiday season, Assistant Commission Robert Hill said yesterday. Mr Hill revealed that many suburbs would go into "lock downs", which would see police officers and drug and booze buses stationed at most roads leading to freeways and major arterials."

http://www.theage.com.au/victoria/police-road-blitz-to-lock-down-suburbs-in-ring-of-steel-over-summer-20140909-10e7dd.html

[jprak]

So in Melbourne there's going to be a 4 Months Police Blitz.

"Drivers in Victoria will face the state's biggest-ever road blitz over summer, with police "locking down" suburbs and blitzing major roads across Melbourne.
Along with additional mobile speed cameras, radar guns, booze and drug buses, police will use every available local resource in a four-month campaign aimed at reducing road fatalities during the holiday season, Assistant Commission Robert Hill said yesterday. Mr Hill revealed that many suburbs would go into "lock downs", which would see police officers and drug and booze buses stationed at most roads leading to freeways and major arterials."

http://www.theage.com.au/victoria/police-road-blitz-to-lock-down-suburbs-in-ring-of-steel-over-summer-20140909-10e7dd.html

pepper yur anoos
dey goin in dri

gg man!!! i feel like theres gonna be a blitz soon in NSW as well<.<

[Honda_FD]

pepper yur anoos
dey goin in dri

gg man!!! i feel like theres gonna be a blitz soon in NSW as well<.<

Nahhh My anoos is exit only. Nothing goes in there!
I got another car for daily usage lol. Got a little 2dr Rav 4.
The looks I get when I pull up to lights and they hear my rev matching when I downshift lol. Hoon fest driving a 4x4 though. Speedhumps are like pebbles for me. I dont slow down for anything lol

[*DAN*]

So in Melbourne there's going to be a 4 Months Police Blitz.

"Drivers in Victoria will face the state's biggest-ever road blitz over summer, with police "locking down" suburbs and blitzing major roads across Melbourne.
Along with additional mobile speed cameras, radar guns, booze and drug buses, police will use every available local resource in a four-month campaign aimed at reducing road fatalities during the holiday season, Assistant Commission Robert Hill said yesterday. Mr Hill revealed that many suburbs would go into "lock downs", which would see police officers and drug and booze buses stationed at most roads leading to freeways and major arterials."

http://www.theage.com.au/victoria/police-road-blitz-to-lock-down-suburbs-in-ring-of-steel-over-summer-20140909-10e7dd.html


They don't go easy, trust me :(

Speaking of which, I'm parting out my car. So if anyone with a 9th gen wants coils, let me know :)

[nedkerry]

So in Melbourne there's going to be a 4 Months Police Blitz.

"Drivers in Victoria will face the state's biggest-ever road blitz over summer, with police "locking down" suburbs and blitzing major roads across Melbourne.
Along with additional mobile speed cameras, radar guns, booze and drug buses, police will use every available local resource in a four-month campaign aimed at reducing road fatalities during the holiday season, Assistant Commission Robert Hill said yesterday. Mr Hill revealed that many suburbs would go into "lock downs", which would see police officers and drug and booze buses stationed at most roads leading to freeways and major arterials."

http://www.theage.com.au/victoria/police-road-blitz-to-lock-down-suburbs-in-ring-of-steel-over-summer-20140909-10e7dd.html

It's pretty crazy - good and bad.
Good - there were like 20-30 drink drivers that got pulled over on the Monash on Friday night and had to leave their cars on the freeway.
Bad - ARE YOU KIDDING ME WITH THE DEFECT NOTICES FOR THE BIGGEST BS, EVER??!! (I didn't get defected but so many people on Facebook posting them.)

[iou]

Anything new guys? Don't want to tell or too lazy to post up????
My latest mod, auto folding mirrors with Super bright White LED Puddle light. The puddle light, this function i like the most cause very nice when everytime you unlock your car, open the door, the puddle light comes up, let you know any dog poo or not, lol :-))))
Sorry can't take a proper photo with my crap phone, but it looks like this



http://tapatalk.imageshack.com/v2/14/09/24/9e641e2e242f5874780c651097536fcb.jpg

[NeedVtec]

Details?

[SharkChu]

Anything new guys? Don't want to tell or too lazy to post up????
My latest mod, auto folding mirrors with Super bright White LED Puddle light. The puddle light, this function i like the most cause very nice when everytime you unlock your car, open the door, the puddle light comes up, let you know any dog poo or not, lol :-))))
Sorry can't take a proper photo with my crap phone, but it looks like this



http://tapatalk.imageshack.com/v2/14/09/24/9e641e2e242f5874780c651097536fcb.jpg

Details? Is yours a 1.8L?

I've seen them on ebay but, not sure how to get it to work on 1.8L...

[Honda_FD]

Details? Is yours a 1.8L?

I've seen them on ebay but, not sure how to get it to work on 1.8L...

I dont think mirror lights matter if its 1.8l or 20.l Lol?

[jprak]

Yes it does

[NeedVtec]

Found the puddle light but have to replace whole side mirror fkkkkk that

[iou]

Bought it online, from thespeedline. 95% happy only :-) anyway, it is still worthy to change the mirrors. Because my car is VTI, there are no indicator on the mirror. Now i nearly have every function
1) Fold in when lock the car by the remote
2) Fold out when unlock the car by the remote
3) The glass tilt down when put on reverse gear
4) Fold in or out by the switch
5) Heated function (it's good for the car usually parked outside)
6) Puddle lights (really love this function)

Function 3 and 4 not yet on my mirrors but will do in future.
Want to be exactly like this

http://youtu.be/TLpagfwCyWE

[SharkChu]

Bought it online, from thespeedline. 95% happy only :-) anyway, it is still worthy to change the mirrors. Because my car is VTI, there are no indicator on the mirror. Now i nearly have every function
1) Fold in when lock the car by the remote
2) Fold out when unlock the car by the remote
3) The glass tilt down when put on reverse gear
4) Fold in or out by the switch
5) Heated function (it's good for the car usually parked outside)
6) Puddle lights (really love this function)

Function 3 and 4 not yet on my mirrors but will do in future.
Want to be exactly like this

http://youtu.be/TLpagfwCyWE

Ahhh, thespeedline, been eyeing their products for ages, but couldn't trust the quality.

Who installed for you? Pretty sure you have to replace the whole mirror, as well as do some wiring? Seems complex.. hm.. but tempted for that puddle light ahaha.

Futher info, would be appreciated :D

Or PM me if you can.

[chrischris]

Who wants to swap stock rims (must have rwc tread%) for my enkei evo 8's? Took a while to get them fitting the car right, will come with the correct mag seat nuts that are hard to find and expensive, ttf said they cost around 6$ each. Tires are 215/45/17 so they dont rub as the stock tires they came with (235's) rubbed on every bump and turn.
I am selling the car as some of you know and need to pass rwc.

http://i.imgur.com/ZmDN1Dl.jpeg

[NeedVtec]

What's the catch bruv

[chrischris]

What's the catch bruv

Are you asking me?

No catch, I need stock rims to pass rwc and sell the car. I want to swap for stockies with a cash adjustment of course

[*DAN*]

What's the catch bruv

do it and we can go on another prinny run

[NeedVtec]

do it and we can go on another prinny run

Haha good times. Been a while

[Honda_FD]

do it and we can go on another prinny run

Stanced Cars welcome?

[NeedVtec]

Stanced Cars welcome?

Only if alfas come too

[Honda_FD]

Round Two? Boys?

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/1723249_958870274130050_6820244757909565511_n.jpg? oh=38e1e4d8fdeae0f11f9cf0a374c6da8b&oe=54D0D435&__gda__=1418366821_a55f12f46c6bbb49332d75a9c016fd8 0

[FDYOU2]

Hi guys. Will be selling my 6000k all in one HIDs. They have served me well in night drives, but it was time for an upgrade to 8000k. Guaranteed in good working condition. Far superior to any halogen globes. Simple and easy plug and play. $50 (RRP $138), Sydney only.

http://tapatalk.imageshack.com/v2/14/09/29/fbbeb3df2846af22e206c60c30daeec8.jpg

[jprak]

Shotgun ^

[FDYOU2]

Shotgun ^

You've got me on fb if you're srs in buying.

[SharkChu]

Need assist.

Car, I started it up, and it vibrated like crazy. this happened on P and N. But when on D, it idles normally.

When I step outside, and look everywhere, everything seems normal.

I took the car for a slow drive around the block and back. But it seemed to have settled now..


What may have been the issue?

EDIT: Turns out, a worn engine mount to the left of the engine. Dealer wont replace it under warranty, due to me having a CAI, and they said that may be the cause of it. Costs $400-$600 to replace..

[Honda_FD]

Need assist.

Car, I started it up, and it vibrated like crazy. this happened on P and N. But when on D, it idles normally.

When I step outside, and look everywhere, everything seems normal.

I took the car for a slow drive around the block and back. But it seemed to have settled now..


What may have been the issue?

EDIT: Turns out, a worn engine mount to the left of the engine. Dealer wont replace it under warranty, due to me having a CAI, and they said that may be the cause of it. Costs $400-$600 to replace..

How does a CAI wear out an engine mount?

[integraR]

Need assist.

Car, I started it up, and it vibrated like crazy. this happened on P and N. But when on D, it idles normally.

When I step outside, and look everywhere, everything seems normal.

I took the car for a slow drive around the block and back. But it seemed to have settled now..


What may have been the issue?

EDIT: Turns out, a worn engine mount to the left of the engine. Dealer wont replace it under warranty, due to me having a CAI, and they said that may be the cause of it. Costs $400-$600 to replace..

put in stock intake and go to another dealer

[lolmclol]

EDIT: Turns out, a worn engine mount to the left of the engine. Dealer wont replace it under warranty, due to me having a CAI, and they said that may be the cause of it. Costs $400-$600 to replace..

Ask them to provide you on their letterhead, signed off by the service area manager that that's their conclusion as to what the problem is.

If they're willing to provide that, then you know they aren't bullshitting you. But further that and approach another mechanic for a second opinion, should their opinion differ from the dealerships, approach the ACCC.


But it seems weird that you aren't getting any vibrations when you're in Drive.


put in stock intake and go to another dealer

Or do this, but that will be a pain in the anoose.

[EKVTIR-T]

How does a CAI wear out an engine mount?The huge power and torque increase

[*DAN*]

Stanced Cars welcome?
of course, roads are all smooth there anyway ;)

Round Two? Boys?

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/1723249_958870274130050_6820244757909565511_n.jpg? oh=38e1e4d8fdeae0f11f9cf0a374c6da8b&oe=54D0D435&__gda__=1418366821_a55f12f46c6bbb49332d75a9c016fd8 0

lol probably won't even be driving a honda by then anymore :(

[jprak]

Got new lights provided by FDYOU2 and got them buffed out to clear off the haze

Would recommend mothers nulens headlight restore


http://tapatalk.imageshack.com/v2/14/10/01/29de8f3c7c7e3c011369b2b1f36c3756.jpg

http://tapatalk.imageshack.com/v2/14/10/01/30e533636c742e54c19bccc8362798bc.jpg

[lolmclol]

So clean they're invisible!

(-;

[jprak]

So clean they're invisible!

(-;

OH YOU~!!!! <3

AHAHAHAHAHA! ill get pics on it later :L

[lolmclol]

OH YOU~!!!! <3

AHAHAHAHAHA! ill get pics on it later :L

Hue hue hue

Had to be done <3