View Full Version : teflon tape for alluminium hose fittings?
BlitZ
26-06-2007, 12:06 PM
teflon tape for alluminium hose fittings?
mixed bags.. people say no as it would crack the alloy fittings..
some swear by it
kid_dynamite
26-06-2007, 12:56 PM
If it's a tapered thread (NPT or pipe thread) then you can use teflon tape or a sealant on it. If you're talking about braided hose with an AN/SAE thread, you don't use tape on them, and should use a crush washer or o-ring instead.
BlitZ
26-06-2007, 02:24 PM
Im talking about braided oil lines and AN connectors.. so i can presume no tape anywhere? hehehe thanks dude.
kid_dynamite
26-06-2007, 02:47 PM
Yep no tape. If you use the correct hoses to the hose ends, and tighten them to the exact specifications, you won't have a problem. Also helps to check them once in a while.
Check out the following links for some more info:
http://www.anplumbing.com/tech.html
http://www.mpsracing.com/products/Earls/AI_Hose_Hose.htm
Limbo
28-06-2007, 01:35 PM
when we did my braided lines we used this oil to lube/seal the fittings. Its a special oil of some sort.
Maybe that's what your looking for? My friend got it from Rocket Industries. and i used his. Only need a drop of it.
Put a bit of gasket goo on the threads.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.