Question about 4th Gen H23A vs H22A

[espionage84]

Hi guys,

Both my friend and i drive 4th gen ludes. Mine is a H23A and when I tried my friend's H22A, i felt that it had less torque (i think my friend felt the same too) which was really weird. I couldn't really feel the power surge from the VTEC either. From what i know, mine only has intake and a cat-back exhaust mod on it (i bought it like that) and i think he has the same changes. The only difference is that his revs higher than mine which i already knew before trying it out. But power wise, isn't his supposed to be alot better? At least when the VTEC kicks in?

Is his H22A faulty? Cos i've read many forum posts saying how much a H22A is superior to a H23A but i feel differently from my experience. Has anyone else tried the 2 different engines?? :confused:

[boosted_andy]

the h22 should kick the h23's ass no worries.
ive been in all 3 models....S, Si, and VTi-R and the difference from S>Si, was minimal, but then going to Si>VTi-R was just ridiculous.
especially after 2nd gear over 5000rpm, the Vti-r will leave the Si standing....

[Drew]

Theres two types of H23A btw

[Brash22]

I seriously doubt that the car was fitted with the EUDM H23A VTEC donk. (Blue top)

If you think there wasn't much difference, then yes, it would seem that there was something wrong with the H22A engine. If there was no cam change at 5100RPM, then the computer has probably disabled the VTEC solenoid for some reason. There could be a number of reasons, the easy ones being loose wire connections and lack of oil in the sump.

Pull a CEL and see what it tells you.

[Hans Bond]

H22A has more top end power while H23A has more torque. And yes boosted_andy was right, the H22A will leave the H23A standing..

I even can beat a ford xr6 with my h22a if i hit the vtec :P

[MRH-22A]

i dont fink ur gona be feeling much difference when sitting in the si or vtir.. cuz all ur butt is feeling is the torque.
but line them up and u'll see that the vtir will leave the si behind.

[espionage84]

hmm... i guess ill try dragging it against his one day. cos it really doesnt feel much of a difference to me. i can hear the vtec coming in but there isnt much increase in the torque surge. i mean the h22a isnt an i-vtec, the torque shouldnt be smooth, it should hit u in the face like all other old vtecs.

[HondaLva]

hey mate,

all the above is pretty much true. i Used to own a vti-r and my mate had an Si...and i would always kick his arse. get the H22a serviced

[vtek]

H22A has more power and sligtly more torque and can reach higher top speeds in different gears. H23A owners would tell you different but I can tell you for a fact the H22A has more power & torque.

[ludetec]

haha its funny how everyone says the same thing

and yeah its mostly tru!

i have driven a few vtir's n they all go differently, mine even stock would beat my dads! just the way it has been driven over the years

i advise that u service ur honda regularly n then drive the car in vtec for a while. n dont b afraid of the rev limiter...its there for a reason

my h22 has a stock bottom end n i rev it to 8200 all day long

but yes the h23 does have a slightly fatter torque curve...n in theory a h22 should beat the h23 for outright power. provided that its running well

[CB7_OWNER]

Vtec crossover should at least be noticeable.....h22a>h23a

[NSPYRE]

wow... digging up the dead...

[fusionprelude]

im just in the process of doin a jdm h22a swap in my si i still hav it in the air but the rev speed in the h22a is so much faster than the old h23a......... h22a ftw

[AzN_Allstar]

where dose the h23a come from anyways i know where the h22a comes from but i haven t heart of the h23a

[NSPYRE]

4th Gen prelude Si and SRS (AUDM)

[dundas]

i like cars

[Mr_will]

H22A has more top end power while H23A has more torque. And yes boosted_andy was right, the H22A will leave the H23A standing..

I even can beat a ford xr6 with my h22a if i hit the vtec :P

ford xr6's have the same engine as every other falcodore out there. the xr6 only has suspension and trim extras.

its not exactly remarkable that you can beat a family sedan.

[Drew]

H23A1 is DOHC NON Vtec

H23A is DOHC Vtec

Don't forget that