View Full Version : replacing fluids.
Iwishiwasa Type R
29-06-2007, 02:06 PM
how many ltrs to replace in dc2
manual tranny fluid?
engine oil?
also..whats the usual method to get tranny oil into your gearbox.. i was thinking of using a modified hand soap pump with some tubes and lengethen stem.. or si there an easier method ie buy sumfin from repco etc..
destrukshn
29-06-2007, 02:09 PM
dc2 engine oil is 4litres
transmission is 2 litres.
but i would usually buy 3 bottles of transmission, just in case of spillage.
just use a plastice hose from bunnings for like 3bucks, and connect your funnel to it.
Kiz_EG6
29-06-2007, 02:12 PM
how many ltrs to replace in dc2
manual tranny fluid?
engine oil?
also..whats the usual method to get tranny oil into your gearbox.. i was thinking of using a modified hand soap pump with some tubes and lengethen stem.. or si there an easier method ie buy sumfin from repco etc..
dude, bout 3.8 - 4 litres in the engine, and... from memory bout 2.7 lt in the tranny! The info should be in ur manual if you still have it!
You can get an oil pump from Autobarn etc for gettin the tranny oil out, i believe there is a plug on the transmission somewhere on ur's, again, all info should be in user manual!
destrukshn
29-06-2007, 02:14 PM
2lt from the transmission, somtimes a tad over like 2.2. for a dc2.
Iwishiwasa Type R
02-07-2007, 04:22 PM
cheers boys!
2lt from the transmission, somtimes a tad over like 2.2. for a dc2.
I'm going to go with more like 2.5-2.7L
Regardless you still need 3 bottles
bennjamin
02-07-2007, 10:43 PM
on a B series hydraulic gearbox - its pretty much 2.4l when the fluid drips back out (of the fill hole) This is the amount you need :)
Try my DIY filler for transmission fluid -
http://www.ozhonda.com/forum/showthread.php?t=58596
B-series hydro boxes are 2.4L
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.