Getting speaker wires into door

[Javed]

Hey guys,

Well i checked out all the articles on how to do this, especially the one at team integra. The problem is i just CANNOT get that molex connector seperated. I have tried for 3 days now, and just ended up giving it up and moving onto the rest of the wiring for my system. It is an absolute biatch, and i am just wondering if any of you guys have other tips that have not been ublished anywhere as i have already read/searched form ore help.

Cheers
Javed

[BlakTegra]

I just followed Team-Integra and works fine. I think there a tiny tip where that locks it (molex) in place..

[ECU-MAN]

are you talking about the connector that goes into the door ??

[Javed]

yeah. I tried feeling for a tip my fingers are like blardy sore 3 days later lol. gettin so pissed off. Nearly broke the thing in rage. On the other side some doofus installing the new central locking motor has actually pushed both sides of the plug into the door kinda, hard to explain, but it doesnt make it any easier!

[ECU-MAN]

I know what your saying. you get so agro, your hands het slimy from the grease in the connector and sore. Im guessing you have been able to unclip the rubber insulator and pull it back, you need to get a fine flat head screw driver and fint the lock clip, pry it up. then you should be able to pull it apart.
PS you need Jap hand to be able to do this :)

[pintorulz]

i just drilled holes in the door and put the ways through that way....

[crispy]

I know on my ls it was a pain in the ass gettin wires thru the molex plug... like ecu man said, u need jap hands, although i do have freakishly long fingers so it made it easier... just keep trying cos if u do it right u can be happy with the effort u put in, and i know its easy to say this, but try and keep your cool cos that way u wont damage anything!! good luck man

[stormridah]

shyeah i had the same problem... i think im gonna get it done properly at fhrx