power window conversion

[zco]

I have an EK and looking to do power window conversion

question: Is it possible to use OEM power window internals from a door that belongs to an EG/DC2 ?

[Kiz_EG6]

I have an EK and looking to do power window conversion

question: Is it possible to use OEM power window internals from a door that belongs to an EG/DC2 ?

Let me ask... what EK came without power windows?!?

[fatboyz39]

Let me ask... what EK came without power windows?!?

EK CXi

[STOCK]

the eg/dc use different regulators to the ek so unless you want to do some crazy hacking and modding no

[BlitZ]

fark power windows.. weighs the car down...

lexan or a simple net would be good for your daily

[MWAKU]

bump for this.

how 2 do and how much.,!

[trism]

go to a wrecker and find a car with it.

get doors

swap doors

doneski

[MikeyG]

trism... dude not that simple... u gotta get hte harness and wiring.. then connect to the battery then go thru the fenders then thru the door then connecting to the fuse box or if u got a 4 door then ur more fukd wif stripping the whole car down and wiring all the ova the joint! GG 4DLULZZ

[90LAN]

buy two doors complete with power options then run new wiring and regulators
it cost me 400 for two doors and 100 labour so 500 all up
i did this on a eg thou it also had the power mirror option too
this is the best way with less hassles

[MikeyG]

did u take it to an car electrican to do this lan?

casue u do it urself with ur existing door.. all u need is the next model above with power windows options..

EG. zco has a cxi i believe.. so grab the trims off a gli and regulator and wiring and switchs from it aswell.. and go from there.. not a simple thing to do but can save u money

[90LAN]

i took it to my mates place
it is a pain to put power regulators/etc in door
just get complete ones

[trism]

trism... dude not that simple... u gotta get hte harness and wiring.. then connect to the battery then go thru the fenders then thru the door then connecting to the fuse box or if u got a 4 door then ur more fukd wif stripping the whole car down and wiring all the ova the joint! GG 4DLULZZ

hahahah i know i was being a tool lol

[MWAKU]

Oh ok, seems ok, my dads pretty good with elecs, did my alarm, though somethings weren't working (remote central), but everything else was fine.. so i hope he should have some idea, i'll go grab some gli door trims and go from ther
thanksguys

[MikeyG]

DUDE... JESUS CHRIST

u need more then just door trims...

u need ;

switches
regulator
wiring
harness
and door trim

gg @ doing it.. GG and 4DLULZZ

[MWAKU]

whoops i meant doors LOL relax my bad. asif door trim is going to make it power windows. walla chillout LOL

[EK1.6LCIV]

motors are like 130-175 at all wreckers atm for them in QLD, it's basic as, the windows have the two tabs on the bottom in the manual version? If so it should be piece of piss

then u need alot of shit they'll sting u for, hardly worth it

buy doors ftw

[Zdster]

motors are like 130-175 at all wreckers atm for them in QLD, it's basic as, the windows have the two tabs on the bottom in the manual version? If so it should be piece of piss

then u need alot of shit they'll sting u for, hardly worth it

buy doors ftw

No, you need to replace the regulators.

[circuit_DC5]

LOL so no one has attempted this yet?

i've installed everything, harness etc, but it aint working, checked all the fuses still aint working. i have no power running through to the power window switch. im using all OEM GLI harness motors etc.

i have the following
# Window regulators x 2 (btw what do these look like? lol )
# Window motors x 2
# Driver and passenger side switches
# Door trims x 2
# Floor harness

anyone have any pointers.

[circuit_DC5]

http://repo.jackmoves.com/v/erik/album106/album206

thank zdster