rewiring speakers

[gbang007]

i am trying to rewire my speakers but am having no luck. i cant even move the wire by pulling it from one side to try and get it out. i know to stick the new wire onto the old wire so once the old comes out, the new will be in place, but the old wont budge. its at the front of an ek1. anyone got any other ideas? anyone in brisbane wanna give me a hand? i'll shout you a six pack:D all i need is to get the wires in, i know how to do everything else. so it should take more then 30mins if you know what your doin and have done it before.

[Jonald]

where abouts are you?

[funkdr]

Are you trying to pull through the door loom because the doors have plugs behind the rubber boots

[gbang007]

where abouts are you?

kedron

[gbang007]

Are you trying to pull through the door loom because the doors have plugs behind the rubber boots

im trying to pull it throught the rubber bit that is between the door and the interior. it is an L shape kinda rubber piece that leads into the car. it like covers and protects the wires. they are just so tightly fitted that i cant move anything.

[funkdr]

im trying to pull it throught the rubber bit that is between the door and the interior. it is an L shape kinda rubber piece that leads into the car. it like covers and protects the wires. they are just so tightly fitted that i cant move anything.

No its not tight its a plug gently prize the rubber off the door and u will see the plug it takes all the wires to the door.


Similar to this in an mazda 323

http://www.fastfoursforumscarclub.com/temp/323/4.jpg

[gbang007]

No its not tight its a plug gently prize the rubber off the door and u will see the plug it takes all the wires to the door.


Similar to this in an mazda 323

http://www.fastfoursforumscarclub.com/temp/323/4.jpg

do hondas have that white plastic thing too? or just the rubber cover thing?

[funkdr]

They have similar plastic plug to that white one its plugged in on door side and the rubber seals it from the weather

[funkdr]

Howd you go mate?

[gbang007]

Howd you go mate?

yeh mate, its all good now. except, i mine was a little different, the white thing in mine was part of a wiring harness on either side of the door which clipped together tightly for power windows etc, and that part sat tightly clipped into the door. so what i had to do was move that bit inside so i had room to put the wire in, and then it was fine, had to make a hole in the rubber cover to get it in etc. but its all fine now

[funkdr]

awesome glad i was some help dont forget the PQ points