PDA

View Full Version : Engine Light????



Danigirl82
13-07-2007, 01:47 PM
Has anyone ever had problems with their civic, i have a vti-r 1996 model. The engine light has come on and when it does it stays on for like two weeks and when it is on the revs drop right down and the car stalls, i have to be revving it to keep the car going, after about 5 minutes its has just enought idle, JUST enough, to keep the car running and thats after tweaking the revs to a higher level under teh bonnet. When the engine light goes off the car is fine, but revs a lil high due to my adjusting them to accommodate the lower revs when the engine light is on.

jdmTYPE R
13-07-2007, 01:49 PM
do a ecu check sounds like the map senser playing up

Danigirl82
13-07-2007, 01:52 PM
is that where they plug that reader into your computer??? have u ever had a problem like this??

Danigirl82
13-07-2007, 01:54 PM
is that where they plug a reader or somthign into your computer??? have you ever had a problem like this before or know of someone who has????



do a ecu check sounds like the map senser playing up

jdmTYPE R
13-07-2007, 02:09 PM
http://www.ozhonda.com/forum/showthread.php?t=8218&highlight=check+engine+light+code

here a link on how to do it, yesi had that problem before sometimes its fine and sometimes its not but mine happen when the engine is warm.....

Danigirl82
13-07-2007, 02:13 PM
thanks heaps i will try that over the weekend, ill let you know how i go

ECU-MAN
13-07-2007, 02:15 PM
as mentioned above check the ECU

http://www.ozhonda.com/forum/showthread.php?t=67113

Honda_CRX
13-07-2007, 04:52 PM
Have the same sort of problem, but when car is warm or cold, am told Vtec pressure senser and/or map senser - there over $200 for each senser i was told

vinnY
16-07-2007, 12:01 PM
had a similar problem on another ek4, kept dying
turns out some cables leading to the ecu was loose
check for some physical damage while you're down there with the test plug :)

Danigirl82
18-07-2007, 11:55 AM
Thanks i will check it out while im down there, thanks for you help ; )


had a similar problem on another ek4, kept dying
turns out some cables leading to the ecu was loose
check for some physical damage while you're down there with the test plug :)