PDA

View Full Version : kinda noobish. what do you use on your plates on your ek.


nugget666
13-07-2007, 06:21 PM
im about to get my personalised plates and dont want them being pinched. What kinda screw head do you recomand i find. on the ek its like a 10 - 12 gauge or more screw.
EG5[KRT]
13-07-2007, 06:28 PM
just get a normal screw but get a plastic washer to go behind it before u screw on the plate.
[ricer]
13-07-2007, 06:32 PM
on the front i stuffed my screw holes so now its bolted in with a nut on the back
the usual plate theif my not be prepared for that haha

but why would anyone wanna steal my plates anyway
m3ntAL_l2
13-07-2007, 06:35 PM
double sided tape
SiReal
13-07-2007, 06:48 PM
well we air impact drilled my mates plates onto his bumper and he cant get them off by hand.

we didnt do it on purpose but it works a treat.
dc2dc2dc2
13-07-2007, 06:48 PM
such a sad thread.
its just screws.
get over it.
Sydsyd
13-07-2007, 06:51 PM
screw with washer/nut @ the back of the plate, then superglue the screw to the plate...

extra safe...padlock ur plate too:p
destrukshn
13-07-2007, 06:51 PM
you can get these "special" you may call em screws from autobarn.
altrex makes em i think
with a normal screw driver you can tighten em, but if you try to loosen em it will slip, unless you have the tool, which obvisously comes with it.
lol
xenonkuraz
13-07-2007, 07:09 PM
you can get these "special" you may call em screws from autobarn.
altrex makes em i think
with a normal screw driver you can tighten em, but if you try to loosen em it will slip, unless you have the tool, which obvisously comes with it.
lol

I bought them for a dollar each from Burson Auto...but they didn't sell the tool to remove them!
[ricer]
13-07-2007, 07:11 PM
I bought them for a dollar each from Burson Auto...but they didn't sell the tool to remove them!

thats pretty gay
thaaznboi
13-07-2007, 07:29 PM
RIVETS!!! da way to GO
scyt7e
14-07-2007, 03:17 PM
lol, i think whatever you do make sure you can undo it and im curious if you got them nicked.. which i have never seen you can just get them replaced ? for free? cause some 1 nicked your plates and you pay up front for the plates themselves anyway right? :eek:
piassh
14-07-2007, 04:32 PM
Bro,

Use 3M's double side tape. It suits all weather.
Just stick on the four sides of the plate will do...
nugget666
15-07-2007, 10:19 AM
lol, i think whatever you do make sure you can undo it and im curious if you got them nicked.. which i have never seen you can just get them replaced ? for free? cause some 1 nicked your plates and you pay up front for the plates themselves anyway right? :eek:

from what i heard personalised plates you got to pay to get new ones.